| Port details |
- meshdev Mesh comparison software
- 0.5_1 cad
 =0      0.5_1Version of this port present on the latest quarterly branch. - There is no maintainer for this port.
- Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
- Port Added: 2012-02-06 15:58:29
- Last Update: 2023-11-01 22:11:47
- Commit Hash: 05f0f44
- License: GPLv2
- WWW:
- https://meshdev.sourceforge.net/
- Description:
- MeshDev is a mesh comparison software. It accepts two meshes as input and
computes the geometrical deviation between the two meshes.
It return numerical values and can optionaly generate visual results (with a
pseudo-colored mesh corresponding to the measured deviation) in OpenInventor
format.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- To install the port:
- cd /usr/ports/cad/meshdev/ && make install clean
- To add the package, run one of these commands:
- pkg install cad/meshdev
- pkg install meshdev
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: meshdev
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (meshdev-0.5.tar.gz) = d9b31f803903e632211085cf971310eb872b782b8153cfff25f42b33fc76a1bc
SIZE (meshdev-0.5.tar.gz) = 110918
Packages (timestamps in pop-ups are UTC):
- This port has no dependencies.
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- cad_meshdev
- USES:
- dos2unix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.5_1
01 Nov 2023 22:11:47
 |
Rodrigo Osorio (rodrigo) |
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart |
0.5_1
20 Jul 2023 10:22:39
|
Muhammad Moinur Rahman (bofh) |
cad/meshdev: Fix build with llvm16
- Add LICENSE=GPLv2
Sponsored by: The FreeBSD Foundation |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.5
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.5
20 Jul 2022 14:20:58
|
Tobias C. Berner (tcberner) |
cad: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* AMAKAWA Shuhei <amakawa@jp.FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Anders Andersson <anders@hack.org>
* Bruce M Simpson <bms@FreeBSD.org>
* Christoph Moench-Tegeder <cmt@FreeBSD.org>
* David Yeske <dyeske@gmail.com>
* Diane Bruce <db@db.net>
* Joachim Strombergson <watchman@ludd.ltu.se>
* Johnny Sorocil <jsorocil@gmail.com>
* Julian Jenkins <kaveman@magna.com.au>
* Marc Fonvieille <blackend@FreeBSD.org> (Only the first 15 lines of the commit message are shown above ) |
0.5
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.5
19 May 2016 10:21:25
 |
amdmi3 |
- Fix trailing whitespace in pkg-descrs, categories [a-f]*
Approved by: portmgr blanket |
0.5
20 Sep 2015 15:22:53
|
marino |
cad/meshdev: Support modern gcc by adding <cstring> header |
0.5
14 May 2015 10:15:09
|
mat |
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight |
0.5
10 Dec 2014 22:29:15
|
gahr |
- Reset maintainership of my ports |
0.5
26 May 2014 07:14:54
|
gahr |
- Fix MASTER_SITES
Reported by: bapt |
0.5
26 May 2014 06:55:07
|
bapt |
Convert to USES=dos2unix
With hat: portmgr |
0.5
26 Sep 2013 16:26:17
|
gahr |
- Fix on CURRENT [1]
- Support STAGEDIR
- Fix up CFLAGS
Reported by: pkg-fallout |
0.5
20 Sep 2013 15:58:42
|
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad) |
0.5
06 Feb 2012 15:57:20
|
gahr |
- New port: cad/meshdev
MeshDev is a mesh comparison software. It accepts two meshes as input and
computes the geometrical deviation between the two meshes.
It return numerical values and can optionaly generate visual results (with a
pseudo-colored mesh corresponding to the measured deviation) in OpenInventor
format.
This port features a patch (by myself) to read binary and ASCII STL files.
This feature was removed in the transition from version 0.4 -> 0.5.
Distfiles are unfetchable from sourceforce. For this reason, they're hosted
on our infrastructure.
WWW: http://meshdev.sourceforge.net/ |
As an Amazon Associate I earn from qualifying purchases.