FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
lzo Portable speedy, lossless data compression library
1.08_2,1 archivers Deleted on this many watch lists=124 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Deprecated DEPRECATED: use lzo2 instead for new installs
Expired This port expired on: 2011-05-31
Maintainer: mandree@FreeBSD.org search for ports maintained by this maintainer
Port Added: unknown
Also Listed In: devel
License: not specified in port
     LZO is a data compression library which is suitable for data
     de-/compression in real-time. This means it favours speed over
     compression ratio.

     LZO implements a number of algorithms with the following features:
        + Decompression is simple and *very* fast.
        + Requires no memory for decompression.
        + Compression is pretty fast.
        + Requires 64 kB of memory for compression.
        + Allows you to dial up extra compression at a speed cost in the
          compressor. The speed of the decompressor is not reduced.
        + Includes compression levels for generating pre-compressed data
          which achieve a quite competitive compression ratio.
        + There is also a compression level which needs only 8 kB for
          compression.
        + Algorithm is thread safe.
        + Algorithm is lossless.

Author: Markus Franz Xaver Johannes Oberhumer
        markus.oberhumer@jk.uni-linz.ac.at

WWW: http://www.oberhumer.com/opensource/lzo/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. libtool>=2.4 : devel/libtool
There are no ports dependent upon this port

No installation instructions: this port has been deleted.

The package name of this deleted port was: lzo


Configuration Options
     No options to configure

Master Sites:
  1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
  2. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  3. ftp://ftp.cn.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  4. ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  5. ftp://ftp.ru.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  6. ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  7. ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  8. ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/mandree/
  9. http://www.oberhumer.com/opensource/lzo/download/LZO-v1/
Port Moves
  • port deleted on 2011-07-07
    REASON: Use archivers/lzo2 instead

Number of commits found: 39

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
07 Jul 2011 00:57:15
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
Remove expired port archivers/lzo.
Note that some ports from the PR still need attention for the port to lzo2,
devel/py-tables in particular (wen, are you there?)

PR: ports/156954
23 May 2011 11:34:36
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
Change MASTER_SITES mirror to read LOCAL/mandree instead.

Suggested by: sunpoet@
11 May 2011 09:21:31
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
Mark deprecated and for expiry.
See http://www.freebsd.org/cgi/query-pr.cgi?pr=156954

PR: ports/156954
10 May 2011 20:31:00
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
ftp.uni-koeln.de no longer carriers util/arc/, mirror locally.
21 Mar 2011 16:08:58
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
Add a mirror to MASTER_SITES.
18 Mar 2011 17:59:51
Original commit files touched by this commit  1.08_2,1
miwi search for other commits by this committer
- Get Rid MD5 support

With hat:       portmgr (myself)
04 Dec 2010 07:34:27
Original commit files touched by this commit  1.08_2,1
ade search for other commits by this committer
Sync to new bsd.autotools.mk
13 Jun 2010 11:57:36
Original commit files touched by this commit  1.08_2,1
mandree search for other commits by this committer
Switch MAINTAINER line to FreeBSD address.

Approved by: garga (mentor, implicit)
02 Aug 2009 19:36:34
Original commit files touched by this commit  1.08_2,1
mezz search for other commits by this committer
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr
07 Jan 2009 22:17:25
Original commit files touched by this commit  1.08_2,1
miwi search for other commits by this committer
- Adds self-test as recommended by INSTALL.

Excessively long self-test runs in lzo2 (a different port) were figured
(thanks, naddy@) to be caused by "J" in /etc/malloc.conf, so we set
MALLOC_OPTIONS=jz to avoid that.

PR:             130153
Submitted by:   Matthias Andree <matthias.andree@gmx.de> (maintainer)
21 Aug 2008 06:18:49
Original commit files touched by this commit  1.08_2,1
rafan search for other commits by this committer
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above View all of this commit message)
19 Apr 2008 17:56:05
Original commit files touched by this commit  1.08_2
  Sanity Test Failure
miwi search for other commits by this committer
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
01 Feb 2007 02:42:06
Original commit files touched by this commit  1.08_2,1
kris search for other commits by this committer
Use libtool port instead of included version to avoid objformat a.out botch
23 Feb 2006 10:40:45
Original commit files touched by this commit  1.08_2,1
ade search for other commits by this committer
Conversion to a single libtool environment.

Approved by:    portmgr (kris)
22 Jan 2006 06:58:31
Original commit files touched by this commit  1.08_1,1
edwin search for other commits by this committer
SHA256ify

Approved by:    krion@
15 Nov 2005 06:52:12
Original commit files touched by this commit  1.08_1,1
ade search for other commits by this committer
Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.
29 Aug 2005 07:32:09
Original commit files touched by this commit  1.08_1,1
sem search for other commits by this committer
- Remove CONFLICTS. The ports do not conflict anymore.
- Pass maintainership to submitter.

PR:             ports/85107, ports/85108
Submitted by:   Matthias Andree <matthias.andree@gmx.de>
31 May 2005 19:41:12
Original commit files touched by this commit  1.08_1,1
flz search for other commits by this committer
- Backout latest commit, it needs a repocopy due to API change.

Noticed by:     Matthias Andree <matthias.andree@gmx.de>
31 May 2005 17:55:48
Original commit files touched by this commit  2.00
flz search for other commits by this committer
- Update to 2.0.

PR:             ports/81721
Submitted by:   Ports Fury
31 May 2005 16:01:15
Original commit files touched by this commit  1.08_1
oliver search for other commits by this committer
don't install .la files
31 May 2005 15:39:55
Original commit files touched by this commit  1.08_1
oliver search for other commits by this committer
fix MASTER_SITES
31 May 2005 15:37:56
Original commit files touched by this commit  1.08_1
oliver search for other commits by this committer
change the libtool version to use from 1.3 to 1.5
09 Jul 2004 17:43:11
Original commit files touched by this commit  1.08_1
marcus search for other commits by this committer
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet
14 Mar 2004 06:17:56
Original commit files touched by this commit  1.08_1
ade search for other commits by this committer
Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
27 Jan 2004 20:51:07
Original commit files touched by this commit  1.08_1
trevor search for other commits by this committer
Add SIZE.
21 Oct 2003 09:58:09
Original commit files touched by this commit  1.08_1
osa search for other commits by this committer
Cosmetic fix: use %%DOCSDIR%% macro.
No functionally changes.

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
A part of PR:   57992
20 Feb 2003 16:44:17
Original commit files touched by this commit  1.08_1
knu search for other commits by this committer
De-pkg-comment.
28 Dec 2002 03:16:04
Original commit files touched by this commit  1.08_1
edwin search for other commits by this committer
The SUNSITEs didn't carry the 1.08 version. Informed author.
Noticed by: portsurvey
15 Jul 2002 21:33:57
Original commit files touched by this commit  1.08_1
demon search for other commits by this committer
Do not install .la file.

PR:             40619
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
14 Jul 2002 10:44:08
Original commit files touched by this commit  1.08
anders search for other commits by this committer
Update to 1.08.

PR:             40547
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>
06 Dec 2001 12:23:12
files touched by this commit
sobomax search for other commits by this committer
- Update MASTER_SITES and WWW;   - use DOCSDIR.    
03 Jul 2001 19:41:17
files touched by this commit
lioux search for other commits by this committer
Add NOPORTDOCS support    
14 Feb 2001 05:43:01
files touched by this commit
lioux search for other commits by this committer
typo clean up police: \s -> \t    
29 Jan 2001 19:29:04
files touched by this commit
sobomax search for other commits by this committer
chmod 644 (from 755).    
26 Nov 2000 14:37:43
files touched by this commit
kevlo search for other commits by this committer
Add CONFIGURE_ARGS to install shared library.    
19 Nov 2000 08:13:14
files touched by this commit
kris search for other commits by this committer
Upgrade to lzo 1.07    
08 Oct 2000 00:02:22
files touched by this commit
asami search for other commits by this committer
Convert archivers category to new layout.  
16 Jun 2000 22:52:41
files touched by this commit
asami search for other commits by this committer
Rename INSTALLS_SHLIBS to INSTALLS_SHLIB.  (There was a typo in the   previous
commit message to bsd.port.mk, which said INSTALL_SHLIBS.  Boo.)    
16 Jun 2000 09:48:25
files touched by this commit
sobomax search for other commits by this committer
Fourth round of INSTALLS_SHLIBS conversion.    

Number of commits found: 39

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
muttDec 23
muttDec 23
ntpDec 20
ntp-develDec 20
gitDec 19
otrsDec 16
mod_dav_svnDec 15
subversionDec 15
subversion16Dec 15
subversion17Dec 15
nvidia-driverDec 14
nvidia-driver-173Dec 14
nvidia-driver-304Dec 14
asterisk11Dec 11
bind99Dec 11

10 vulnerabilities affecting 28 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24433
Broken 149
Deprecated 74
Ignore 400
Forbidden 2
Restricted 207
No CDROM 93
Vulnerable 20
Expired 0
Set to expire 69
Interactive 0
new 24 hours 2
new 48 hours5
new 7 days20
new fortnight45
new month103

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.