FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Please give me your LTO-4 or better tape library and I'll put it to good use.
Port details
p5-PerlIO-via-Bzip2 Perl extension to provide a PerlIO layer to bzip2/bunzip2
0.02_1 archivers on this many watch lists=2 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: perl@FreeBSD.org search for ports maintained by this maintainer
Port Added: 18 Dec 2006 18:09:34
Also Listed In: perl5
License: not specified in port
This module implements a PerlIO layer which will let you handle bzip2
compressed files transparently.

WWW: http://search.cpan.org/dist/PerlIO-via-Bzip2/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. p5-Compress-Bzip2>=0 : archivers/p5-Compress-Bzip2
  2. perl5.18.4 : lang/perl5.18
Runtime dependencies:
  1. p5-Compress-Bzip2>=0 : archivers/p5-Compress-Bzip2
  2. perl5.18.4 : lang/perl5.18

This port is required by:

for Build for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

To install the port: cd /usr/ports/archivers/p5-PerlIO-via-Bzip2/ && make install clean
To add the package: pkg install archivers/p5-PerlIO-via-Bzip2


Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/PerlIO/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/PerlIO/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/PerlIO/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/PerlIO/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/PerlIO/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/PerlIO/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/PerlIO/
  8. http://backpan.perl.org/modules/by-module/PerlIO/
  9. http://cpan.metacpan.org/modules/by-module/PerlIO/
  10. http://distcache.FreeBSD.org/ports-distfiles/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/PerlIO/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/PerlIO/
  13. http://www.cpan.dk/modules/by-module/PerlIO/
  14. http://www.cpan.dk/modules/by-module/PerlIO/
  15. http://www.cpan.org/modules/by-module/PerlIO/

Number of commits found: 14

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
12 Mar 2015 23:00:03
Original commit files touched by this commit  0.02_1
Revision:381151
adamw search for other commits by this committer
Some OCD cleanups on some of the perl@ ports.

- Remove dependencies in core
- Put testing depends in TEST_DEPENDS
- Remove unnecessary bsd.port.options.mk inclusions
- Remove checks for Perl versions that no longer exist in the ports tree
- Sort plists, some of which were so jumbled that I have to assume
  the plist was randomized before committing

A lot of the plist changes in this commit are moving PERL5_MAN3 after
SITE_PERL. It's repo churn now, but it makes updating the ports later
far easier.
26 Nov 2014 13:08:38
Original commit files touched by this commit  0.02_1
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
19 Oct 2014 23:12:07
Original commit files touched by this commit  0.02
Revision:371222
bapt search for other commits by this committer
Clean up plist
25 Sep 2013 12:42:50
Original commit files touched by this commit  0.02
Revision:328279
vanilla search for other commits by this committer
Support stage.
20 Sep 2013 13:11:21
Refresh Original commit files touched by this commit
Revision:327699  Sanity Test Failure
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)
02 Aug 2013 18:52:11
Original commit files touched by this commit  0.02
Revision:324174
mat search for other commits by this committer
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default.
10 Jun 2012 18:42:48
Original commit files touched by this commit  0.02
swills search for other commits by this committer
- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)
05 Jun 2012 18:34:53
Original commit files touched by this commit  0.02
az search for other commits by this committer
- Remove SITE_PERL from *_DEPENDS
07 May 2012 15:42:51
Original commit files touched by this commit  0.02
skv search for other commits by this committer
Pass maintainership of almost of my "p5-*" ports to "perl@".

(I hope updating of them will be improved).
17 Sep 2011 06:49:29
Original commit files touched by this commit  0.02
sunpoet search for other commits by this committer
- Change PERL_CONFIGURE to "yes" for all values less than or equal to 5.8.0+

With hat:       perl
18 Mar 2011 17:59:51
Original commit files touched by this commit  0.02
miwi search for other commits by this committer
- Get Rid MD5 support

With hat:       portmgr (myself)
17 Apr 2008 14:30:31
Original commit files touched by this commit  0.02
araujo search for other commits by this committer
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)
08 Sep 2007 00:51:20
Original commit files touched by this commit  0.02
linimon search for other commits by this committer
Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr
18 Dec 2006 18:05:21
Original commit files touched by this commit  0.02
skv search for other commits by this committer
Add p5-PerlIO-via-Bzip2 0.02, perl extension to provide a PerlIO layer
to bzip2/bunzip2.

Number of commits found: 14

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
chicken*Jul 31
net-snmpJul 31
net-snmpJul 31
bind910Jul 28
bind99Jul 28
logstashJul 27
openssh-portableJul 27
chromiumJul 25
wordpress*Jul 24
wordpress*Jul 24
wordpress*Jul 24
wordpress*Jul 24
wordpress-zh_TW*Jul 24
libidnJul 23
opensaml2Jul 23

20 vulnerabilities affecting 50 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 25090
Broken 200
Deprecated 113
Ignore 501
Forbidden 1
Restricted 204
No CDROM 94
Vulnerable 44
Expired 8
Set to expire 101
Interactive 0
new 24 hours 2
new 48 hours3
new 7 days33
new fortnight70
new month191

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.