Number of commits found: 50

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Remove USE_GETOPT_LONG which is a no-op since March 2007

Update to 2.6.1

Remove the drm, which drm causes faac/faad to not be able get mplayer and
other applications function correct. Bump the PORTREVISION.

Reported by:    a few in freebsd-multimedia@
Approved by:    portmgr (marcus)

Update to 2.6

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

Fix the build on FreeBSD 4.x.

PR:             ports/102572
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Mark BROKEN on 4.x

Reported by:    kris via pointyhat

Remove PATCH_DEPENDS and rename the post-patch target to pre-configure. It
makes more sense. Should fix the build in a few of other tinderboxes, but
I don't understand why it works for pointyhat thought.

Reported by:    novel

- Update to 2.5

- Transfer MAINTAINER to multimedia@

Approved by:    dhw (postmaster, for using multimedia@ as maintainer)
                gnome (gstreamer ports)

- Make portlint happy

PR:     ports/95829
Submitted by:   Alexander Botero-Lowry <alex@foxybanana.com>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Change the pre-patch: build-depends to PATCH_DEPENDS= ${BUILD_DEPENDS} to make
  sure we have libtool and stuf for post-patch

Reported by:    kris

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Fix build with new lrintf math functions [1]
- Simplify COMMENT
- Update pkg-desc

Submitted by:   Dan Larsson [1]

Remove old MPEG4IP knobs that are not used anymore

Pointed out by: lofi

Use newer version of autoconf/autoheader (259)

Submitted by:   paulbeard@mac.com

o Have faad depend on mpeg4ip-libmp4v2 so mpeg4ip can use faad
o Bump PORTREVISION

PR:             72205
Submitted by:   ahze

Change email to new FreeBSD.org address

Approved by:adamw (mentor)

Only define WITHOUT_MPEG4IP for >=502126 and if you don't already have mpeg4ip
previously installed. This is also only a temp fix until mpeg4ip is updated
(ports/72206) or fixed.

PR:             ports/72799
Submitted by:   Michael Johnson <ahze@ahze.net> (maintainer)
Pointed out by: spamrefuse@yahoo.com

Disable depend on mpeg4ip until new mpeg4ip is committed. The current mpeg4ip
is broke, so disable this to allow other apps to get build with faad.

Requested by:   Michael Johnson <ahze@ahze.net> (maintainer)

Backout previous commit because the rest of the updates can't be
tested because I'm still on 5.2.1 and I can't compile gcc34 and the
only packages for gcc34 I find are 4.10 or 5.3. Bummer!

[MAINTAINER] audio/faad2: Patch for new mpeg4ip [2 of 4]

        - make faad use libmp4v2 so mpeg4ip can use faad.

PR:             ports/72205
Submitted by:   Michael Johnson <ahze@ahze.net>

Set NO_CDROM due to licensing restrictions.

PR:             ports/71655
Submitted by:   Michael Johnson <ahze at ahze dot net> (maintainer)
Approved by:    portmgr (implicit)

- Only use SDL support if WITHOUT_MPEG4IP is not defined

PR:             ports/71041
Pointed out by: <ingmar.gebert@stud.uni-rostock.de>
Submitted by:   Michael Johnson <ahze@ahze.net> (maintainer)

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Sync with new bsd.autotools.mk

- Switch to MASTER_SITE_SOURCEFORGE_EXTENDED

PR:             ports/67190
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

- Fix decoding files on AMD64 [1]
- Fix mess with plist files
- Bump PORTREVISION

PR:             ports/67060 [1]
Submitted by:   tjr [1], krion [2]
Approved by:    maintainer

- Fix install if WITHOUT_MPEG4IP is defined but it's installed.

PR:             ports/66723
Submitted by:   maintainer

- Update to 2.0 release
- Use external mpeg4ip, provide knob to use internal one

PR:             ports/66598
Submitted by:   michael johnson <ahze@ahze.net> (maintainer)

- configure --with-drm
- Makefile cleanup
- Pass maintainership to submitter

PR:             ports/66543
Submitted by:   michael johnson <ahze@ahze.net>
Approved by:    maintainer

- Fix typo in PORTREVISION

- Install systems.h header. This will help faac to build independently.

PR:             ports/66360
Submitted by:   michael johnson <ahze@ahze.net>
Approved by:    maintainer

Make it work on 64bit platforms.

PR:             64964
Submitted by:   tjr
Obtained from:  faad CVS

- Mark IGNORE for amd64, it builds but does not work properly.

PR:             ports/64964
Submitted by:   tjr
Approved by:    maintainer

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 2.0.

Submitted by:   Simon Barner <barner@in.tum.de>
Approved by:    maintainer

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

portlint (whitespace cleanup)

Use ${MASTER_SITE_SOURCEFORGE} and USE_GETOPT_LONG

Approved by:    maintainer
PR:             50798

libtool uber-patch

* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
  any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)

Approved by:    portmgr (kris) - for the bsd.port.mk hooks
Tested by:      bento 4-exp builds (repeatedly)

Avoid buffer overflow in option processing and bump PORTREVISION.

Obtained from:  OpenBSD

o Fix build when GNU auto* tools are previously installed by forcing
  build-depends target to happen in pre-patch stage
o Check Makefile comments for more information

PR:             52455
Submitted by:   David Yeske <dyeske@yahoo.com>
Approved by:    maintainer (timeout 2 weeks)

De-pkg-comment.

New port faad version 1.1: A LC, MAIN and LTP profile, MPEG2 and
MPEG-4 AAC decoder

PR:             46884
Submitted by:   Sean McGovern <sean@sfarc.net>

Number of commits found: 50

9 vulnerabilities affecting 12 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities