mbrolavox 3.0.1 audio =3

RESTRICTED: No commercial nor military use, no sale
Voices for MBROLA voice synthesizer

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
Port Added: 05 Nov 2003 14:07:20
Also Listed In: accessibility
License: not specified in port

---

---

This port installs diphone databases (voices) for the MBROLA speech
synthesizer.

WWW:  http://tcts.fpms.ac.be/synthesis

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon
Required by:
for Run

audio/linux-mbrola

---

To install the port: cd /usr/ports/audio/mbrolavox/ && make install clean

A package is not available for ports marked as: Forbidden / Broken / Ignore / Restricted

---

Configuration Options

===> The following configuration options are available for mbrolavox-3.0.1:
     af1=Off (default) "Afrikaans Male (6.6Mb) by Daan Wissing"
     ar1=Off (default) "Arabic male (5.1 MB) by Faculte Polytech. de Mons"
     ar2=Off (default) "Arabic male (5.6 MB) by Abdel Muez Abukhalaf"
     br1=Off (default) "Brazilian Portuguese male (5.0 MB) by Denis R. Costa"
     br2=Off (default) "Brazilian Portuguese male (8.3 MB) by Denis R. Costa"
     br3=Off (default) "Brazilian Portuguese male (8.6 MB) by Denis R. Costa"
     bz1=Off (default) "Breton female (25.0 MB) by Jean Pierre Messager"
     ca1=Off (default) "Canadian French male (12.8 MB) by Vincent Arnaud"
     ca2=Off (default) "Canadian French male (9.8Mb) by Silex Creations Inc"
     cr1=Off (default) "Croation male (2.9 MB) by Juraj Bakran"
     cz1=Off (default) "Czech female (2.2 MB) by Mikulas Pinos"
     cz2=Off (default) "Czech male (8 MB) by Mikulas Pinos"
     de1=Off (default) "German female (9.9 MB) by Fred Englert"
     de2=Off (default) "German male (9.3 MB) by ATIP"
     de3=Off (default) "German female (10.4 MB) by ATIP"
     de4=Off (default) "German male (18.6 MB) by University of Stuttgart"
     de5=Off (default) "German female (13.3 MB) by ATIP"
     de6=Off (default) "German male (48.5 MB) by Saarland University"
     de7=Off (default) "German Female (46.5Mb) by DFKI"
     de8=Off (default) "German-Bavarian Male (9.7Mb) by Markus Binsteiner"
     ee1=Off (default) "Estonian male (9.2 MB) by Meelis Mihkla"
     en1=Off (default) "British English male (5.7 MB) by Alan V. Black"
     es1=Off (default) "Spanish male (2.1 MB) by Alistair Conkie"
     es2=Off (default) "Spanish male (5.1 MB) by TCC Communications Corp."
     es4=Off (default) "Spanish male (2.8 MB) by Universidad de Valladolid"
     fr1=Off (default) "French male (4.4 MB) by Faculte Polytech. de Mons"
     fr2=Off (default) "French female (4.8 MB) by Celine Egea"
     fr3=Off (default) "French male (4.8 MB) by Babel Technology"
     fr4=Off (default) "French female (5.4 MB) by Babel Technology"
     fr5=Off (default) "French Belgian (4.8 MB) by Faculte Polytech. de Mons"
     fr6=Off (default) "French male (4.4 MB) by Faculte Polytech. de Mons"
     fr7=Off (default) "French Belgian (3.7 MB) by Faculte Polytech. de Mons"
     gr1=Off (default) "Greek male (1.6 MB) by George Sergiadis"
     gr2=Off (default) "Greek male (5.6 MB) by ]Gerasimos Xydas"
     hb1=Off (default) "Hebrew male (3.4 MB) by Yoram Meron"
     hb2=Off (default) "Hebrew Female (5.6Mb) by Esther Raizen"
     hn1=Off (default) "Korean male (9.9 MB) by Kyongsok Gim"
     hu1=Off (default) "Hungarian Female (8.9Mb) by Eleonora Klein"
     ic1=Off (default) "Icelandic Male (9.9Mb) by Bjorn Kristinsson"
     id1=Off (default) "Indonesian male (4 MB) by Arry Arman"
     in1=Off (default) "Hindi male (3.6 MB) by Amin Charaniya"
     in2=Off (default) "Hindi female (3.7 MB) by Amin Charaniya"
     ir1=Off (default) "Iranian Male (5Mb) by Alireza Farhadi"
     it1=Off (default) "Italian male (5.2 MB) by Claudia Citta"
     it2=Off (default) "Italian female (5.2 MB) by Claudia Citta"
     it3=Off (default) "Italian male (5.1 MB) by Piero Cosi"
     it4=Off (default) "Italian female (4.9 MB) by ITC-irst"
     jp1=Off (default) "Japanese male (1.8 MB) by Yoram Meron"
     jp2=Off (default) "Japanese female (5.6 MB) by Tomohisa Tachiki"
     jp3=Off (default) "Japanese female (1.7 MB) by Yoram Meron"
     la1=Off (default) "Classical Latin Male (7.6Mb) by Olivier Bianchi"
     lt1=Off (default) "Lithuanian Male (22.7Mb) by PK & AG"
     lt2=Off (default) "Lithuanian Male (18.3Mb) by PK & AG"
     ma1=Off (default) "Malay Female (2.9Mb) by Kow Weng Onn"
     mx1=Off (default) "Spanish Mexican male (1.8 MB) by OGI"
     mx2=Off (default) "Spanish Mexican male (3.5Mb) by Humberto Perez Espinosa"
     nl1=On (default) "Dutch male (0.4 MB) by Arthur Dirksen"
     nl2=Off (default) "Dutch male (13 MB) by Arthur Dirksen"
     nl3=Off (default) "Dutch female (8.6 MB) by Raymond Veldhuis"
     nz1=Off (default) "Maori male (2.3 MB) by Mark R. Laws"
     pl1=Off (default) "Polish female (4.0 MB) by PJWSTK"
     pt1=Off (default) "Portuguese female (7.8 MB) by Babel Technology"
     ro1=Off (default) "Romanian male (2.9 MB) by Marian Boldea"
     sw1=Off (default) "Swedish male (9.3 MB) by Marcus Filipsson"
     sw2=Off (default) "Swedish female (5.6 MB) by Adina Svensson"
     tl1=Off (default) "Telugu female (6.9 MB) by Kalpana Reddy KVK"
     tr1=Off (default) "Turkish male (3.7 MB) by Faculte Polytech. de Mons"
     tr2=Off (default) "Turkish female (4.3 MB) by Faculte Polytech. de Mons"
     us1=On (default) "American English female (6.8 MB) by Babel Technology"
     us2=Off (default) "American English male (6.3 MB) by Babel Technology"
     us3=Off (default) "American English male (6.1 MB) by Mike Macon"
     vz1=Off (default) "Venezuelan Spanish (2.3Mb) by MRH"
===> Use 'make config' to modify these settings

---

Master Sites:

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/mbrolavox/

- Get Rid MD5 support

- Update distinfo, distfiles re-rolled upstream.

PR:             ports/130009
Submitted by:   Dima Panov <fluffy@fluffy.khv.ru>

- Remove diacritics to avoid possible problems with non-ascii characters
- Thus, unbreak building port when using unicode locale

PR:             ports/121882 (based on)
Submitted by:   <daniel dot kauffman at rocksolidsolutions dot org>
Approved by:    miwi (mentor)

- Add more voices.
- Fix and remove BROKEN.

BROKEN: Size mismatch

Approved by:    portmgr (self)

- Clean-up.
- Use %%DATADIR%%.

- Clean up distinfo for unmaintained ports: remove CVS tags, empty lines etc.

Obtained from:  distinfo survey

Reset maintainership to ports@ after ~4 months without any response to any
PR.

Thanks for contributing.

Since the acroread7 port is a somewhat important port for our users, I
will hand it over to emulation@ if no _active_ *committer* takes it
before the ports freeze.

While I'm here:
 - fix a little nit in the csound port (I think the intention was to
   create no backup file instead of creating one with a "-e" extension)
 - set ARCH to i386 in the amd64 case for the acroread7 port. This
   is a work-around to be able to install everything when a dependency
   is not already installed (ARCH is read-only in sub-makes, so the
   dependencies can't change it). This should be removed when the
   dependencies are fixed or converted to use bsd.linux-rpm.mk. [1]

Not objected to by:     portmgr (explicit: krion; silence: rest)
Maintainer timeout:     ~4 months
Submitted by:           Sangwoo Shim <sangwoos@gmail.com> [1]
PR:                     87985 [1]

Add sha256 checksum

Approved by: krion@

- Change !empty() to defined().

Noticed by:     FreshPorts Sanity Checks, cperciva

- Fix make checksum issue. Checksum target is disable if DISTFILES *and*
DIST_SUBDIR are empty.

PR:             ports/72512
Submitted by:   Andreas Schulz <ats@first.fraunhofer.de>
Approved by:    maintainer timeout (6 months)

- Rework voice selection to use OPTIONS. This also fixes fetching/building
  on Bento.

PR:             ports/61500 (follow up)
Submitted by:   trevor (maintainer)

These broken ports are scheduled for deletion on June 18 if they are
still broken at that time and no PRs have been submitted containing a fix.

Revert to r1.4 until the problems are resolved (my attempt to work
around this caused INDEX builds to fail).

Note a problem caused by edwin's commit:  do-extract fails.

Fix a problem caused by edwin's commit:  batch builds failed with
"mbrolavox/mbrolavox-3.0.1.tar.gz is not in
/usr/ports/audio/mbrolavox/distinfo." '

[patch] fix "make fetch" for audio/mbrolavox

        When building audio/mbrolavox on bento, it doesn't do
        anything usefull because it there are no voices selected.

        Furthermore, the fetch stage tries to download each file
        from each subdirectory, which is inefficient.

        See also
        http://bento.freebsd.org/errorlogs/i386-4-exp-latest/mbrolavox-3.0.1.log

PR:             ports/61500
Submitted by:   Edwin Groothuis <edwin@mavetju.org>
Approved by:    maintainer timeout

Add size data.

Use the CPIO macro defined in bsd.port.mk.

Use the SORT macro from bsd.port.mk.

Fix batch build.

noticed by:     kris

remove spurious file

MBROLA reorganization:  move voices out of mbrola port into new
mbrolavox port; add new linux-mbrola port for alpha, i386, ppc and
sparc64.

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities