FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
non port: head/cad/Makefile
SVNWeb

Number of commits found: 120 (showing only 100 on this page)

1 | 2  »  

Thu, 6 Mar 2014
[ 13:34 nemysis ] Original commit 
347198 cad/Makefile
347198 cad/brickutils
347198 cad/brickutils/Makefile
347198 cad/brickutils/distinfo
347198 cad/brickutils/files
347198 cad/brickutils/files/brickutils.in
347198 cad/brickutils/files/patch-BrickUtils.desktop
347198 cad/brickutils/files/pkg-message.in
347198 cad/brickutils/pkg-descr
347198 cad/brickutils/pkg-plist
BrickUtils is a simple utility for builders that use LEGO Digital Designer
or LDraw-compatible CAD for designing models.

WWW: http://bricksnspace.wordpress.com/brickutils/
Fri, 31 Jan 2014
[ 09:12 gahr ] Original commit 
341952 MOVED
341952 cad/Makefile
341952 cad/mars
- Remove cad/mars -- does not build, no releases in the past 20 years
Tue, 28 Jan 2014
[ 03:25 amdmi3 ] Original commit 
341499 audio/Makefile
341499 cad/Makefile
341499 comms/Makefile
341499 databases/Makefile
341499 deskutils/Makefile
341499 dns/Makefile
341499 lang/Makefile
341499 mail/Makefile
341499 multimedia/Makefile
341499 net-mgmt/Makefile

(Only the first 10 of 15 ports in this commit are shown above. View all ports for this commit)
- Keep category Makefiles sorted
Fri, 24 Jan 2014
[ 09:32 rene ] Original commit 
340885 MOVED
340885 cad/Makefile
340885 cad/salome
340885 cad/salome-geom
340885 cad/salome-gui
340885 cad/salome-jobmanager
340885 cad/salome-kernel
340885 cad/salome-light
340885 cad/salome-med
340885 cad/salome-multipr

(Only the first 10 of 19 ports in this commit are shown above. View all ports for this commit)
Remove expired ports:
2013-12-22 devel/mico: Broken for more than 6 month
2014-01-22 cad/salome: depends on expired cad/salome-kernel
2014-01-22 cad/salome-netgenplugin: depends on expired cad/salome-kernel
2014-01-22 cad/salome-jobmanager: depends on expired cad/salome-kernel
2014-01-22 cad/salome-visu: depends on expired cad/salome-kernel
2014-01-22 cad/salome-kernel: does not configure
2014-01-22 cad/salome-multipr: depends on expired cad/salome-kernel
2014-01-22 cad/salome-smesh: depends on expired cad/salome-kernel
2014-01-22 cad/salome-gui: depends on expired cad/salome-kernel
2014-01-22 cad/salome-yacs: depends on expired cad/salome-kernel
2014-01-22 cad/salome-med: depends on expired cad/salome-kernel
2014-01-22 cad/salome-light: depends on expired cad/salome-kernel
2014-01-22 cad/salome-randomizer: depends on expired cad/salome-kernel
2014-01-22 cad/salome-sierpinsky: depends on expired cad/salome-kernel
2014-01-22 cad/salome-geom: depends on expired cad/salome-kernel
2014-01-22 devel/combat: depends on expired devel/mico
Sat, 5 Oct 2013
[ 13:39 bapt ] Original commit 
329456 MOVED
329456 cad/Makefile
329456 cad/gwave
329456 x11-toolkits/Makefile
329456 x11-toolkits/guile-gtk
Remove the EOLed x11-toolkits/guile-gtk (gnome1) and its latest user

Approved by:	gnome (implicit)
Tue, 24 Sep 2013
[ 16:31 gahr ] Original commit 
328159 MOVED
328159 cad/Makefile
328159 cad/tkgate
- Remove cad/tkgate: it segfaults on startup, and has been doing so for as long
as I can remember.
Wed, 21 Aug 2013
[ 07:52 mr ] Original commit 
325094 cad/Makefile
325094 cad/qcad
325094 cad/qcad/Makefile
325094 cad/qcad/distinfo
325094 cad/qcad/files/bbox.in
325094 cad/qcad/files/dwg2bmp.in
325094 cad/qcad/files/dwg2pdf.in
325094 cad/qcad/files/dwg2svg.in
325094 cad/qcad/files/patch-aa
325094 cad/qcad/files/patch-ab

(Only the first 10 of 24 ports in this commit are shown above. View all ports for this commit)
Readd qcad and upgrade to version 3.2.1

PR:		ports/181199
Submitted by:	Thierry Thomas (thierry@)
Fri, 26 Jul 2013
[ 19:19 rene ] Original commit 
323748 CHANGES
323748 KNOBS
323748 MOVED
323748 Mk/bsd.kde.mk
323748 Mk/bsd.qt.mk
323748 accessibility/Makefile
323748 accessibility/kdeaccessibility
323748 arabic/Makefile
323748 arabic/kde3-i18n
323748 archivers/Makefile

(Only the first 10 of 435 ports in this commit are shown above. View all ports for this commit)
KDE3 and QT3 expired on 2013-07-01, remove these ports.
Unfortunately, this also affects some ports using QT3 as a GUI toolkit.

Changes to infrastructure files:
- bsd.kde.mk : obsolete, remove
- bsd.qt.mk : note that a CONFLICTS_BUILD line can probably go after a while
- CHANGES : document the removals from bsd.port.mk
- KNOBS : remove KDE and QT (KDE4 and QT4 should be used instead)
- MOVED : add the removed ports

PR:		ports/180745
Submitted by:	rene
Approved by:	portmgr (bapt)
Exp-run by:	bapt
Thu, 21 Mar 2013
[ 20:16 pawel ] Original commit 
314867 cad/Makefile
314867 cad/sweethome3d
314867 cad/sweethome3d/Makefile
314867 cad/sweethome3d/distinfo
314867 cad/sweethome3d/files
314867 cad/sweethome3d/files/patch-build.xml
314867 cad/sweethome3d/files/patch-src__com__eteks__sweethome3d__SweetHome3DBootstrap.java
314867 cad/sweethome3d/files/sweethome3d.sh.in
314867 cad/sweethome3d/pkg-descr
Sweet Home 3D is a free interior design application that helps you place your
furniture on a house 2D plan, with a 3D preview.

WWW: http://www.sweethome3d.com

PR:		ports/171760
Submitted by:	Matthias Petermann <matthias@petermann.it>
Wed, 13 Mar 2013
[ 21:39 pawel ] Original commit 
314115 cad/Makefile
314115 cad/ldraw
314115 cad/ldraw/Makefile
314115 cad/ldraw/distinfo
314115 cad/ldraw/pkg-descr
LDraw is an open standard for LEGO CAD programs that allow the user to create
virtual LEGO models and scenes. You can use it to document models you have
physically built, create building instructions just like LEGO, render 3D photo
realistic images of your virtual models and even make animations.
The possibilities are endless. Unlike real LEGO bricks where you are limited by
the number of parts and colors, in LDraw nothing is impossible.

WWW: http://www.ldraw.org/

PR:		ports/174901
Submitted by:	nemysis@gmx.ch
Sat, 2 Mar 2013
[ 13:26 pawel ] Original commit 
313229 cad/Makefile
313229 cad/logisim
313229 cad/logisim/Makefile
313229 cad/logisim/distinfo
313229 cad/logisim/pkg-descr
Logisim is an educational tool for designing and simulating digital logic
circuits. With its simple toolbar interface and simulation of circuits as
you build them, it is simple enough to facilitate learning the most basic
concepts related to logic circuits. With the capacity to build larger circuits
from smaller subcircuits, and to draw bundles of wires with a single mouse
drag, Logisim can be used (and is used) to design and simulate entire CPUs for
educational purposes.

Logisim is used by students at colleges and universities around the world in
many types of classes, ranging from a brief unit on logic in general-education
computer science surveys, to computer organization courses, to full-semester
courses on computer architecture.

WWW: http://ozark.hendrix.edu/~burch/logisim/

PR:		ports/176354
Submitted by:	Javad Kouhi <javad.kouhi@gmail.com>
Fri, 28 Sep 2012
[ 22:32 pawel ] Original commit 
305014 cad/Makefile
305014 cad/repsnapper
305014 cad/repsnapper/Makefile
305014 cad/repsnapper/distinfo
305014 cad/repsnapper/pkg-descr
305014 cad/repsnapper/pkg-plist
RepSnapper is a host software for controlling a RepRap 3D printer.  It has a
3D OpenGL interface, slices objects and calculates the extrusion toolpath.
It can manipulate 3D objects and save constellations in STL and AMF format.

WWW: http://reprap.org/wiki/RepSnapper_Manual:Introduction

PR:		ports/171796
Submitted by:	Martin Dieringer <martin.dieringe@gmx.de>
Tue, 4 Sep 2012
[ 08:46 zeising ] Original commit 
303646 MOVED
303646 cad/Makefile
303646 cad/gtkwave
303646 cad/gtkwave/Makefile
303646 cad/gtkwave/distinfo
303646 cad/gtkwave/files/patch-configure
303646 cad/gtkwave3
Update to latest version 3.3.39.
Move to cad/gtkwave since we only have one version of this port, and the
move will make maitenance easier.

Approved by:	kwm (mentor)
Sat, 5 May 2012
[ 16:51 nivit ] Original commit 
1.140 cad/Makefile
1.1 cad/fidocadj/Makefile
1.1 cad/fidocadj/distinfo
1.1 cad/fidocadj/files/fidocadj.sh.in
1.1 cad/fidocadj/pkg-descr
1.1 cad/fidocadj/pkg-plist
FidoCadJ is an easy to use graphical editor, with a library of electrical
symbols and footprints (traditional and SMD). It aims to be an agile and
effective small EDA tool for hobbyists.

FidoCadJ stores its drawings in a compact text format, practical for the
copy and paste in newsgroups and forums: this has determined its success
on the Usenet and in numerous communities.

WWW:   
http://davbucci.chez-alice.fr/index.php?argument=elettronica/fidocadj/fidocadj.inc
Sun, 22 Apr 2012
[ 12:06 pawel ] Original commit 
1.139 cad/Makefile
1.1 cad/openvsp/Makefile
1.1 cad/openvsp/distinfo
1.1 cad/openvsp/files/patch-xmlvsp-CMakeLists.txt
1.1 cad/openvsp/pkg-descr
NASA Open Source Parametric Geometry

OpenVSP allows the user to create a 3D model of an aircraft defined by
common engineering parameters. This model can be processed into
formats suitable for engineering analysis.

WWW: http://www.openvsp.org/

PR:             ports/166825
Submitted by:   Fernando Apesteguia <fernando.apesteguia@gmail.com>
Mon, 6 Feb 2012
[ 15:57 gahr ] Original commit 
1.138 cad/Makefile
1.1 cad/meshdev/Makefile
1.1 cad/meshdev/distinfo
1.1 cad/meshdev/files/patch-build_Makefile.release.gcc
1.1 cad/meshdev/files/patch-src_FileSTL.cpp
1.1 cad/meshdev/files/patch-src_FileSTL.h
1.1 cad/meshdev/files/patch-src_Mesh.cpp
1.1 cad/meshdev/files/patch-src_Mesh.h
1.1 cad/meshdev/pkg-descr
- New port: cad/meshdev

  MeshDev is a mesh comparison software. It accepts two meshes as input and
  computes the geometrical deviation between the two meshes.
  It return numerical values and can optionaly generate visual results (with a
  pseudo-colored mesh corresponding to the measured deviation) in OpenInventor
  format.

  This port features a patch (by myself) to read binary and ASCII STL files.
  This feature was removed in the transition from version 0.4 -> 0.5.

  Distfiles are unfetchable from sourceforce. For this reason, they're hosted
  on our infrastructure.

  WWW: http://meshdev.sourceforge.net/
Wed, 4 Jan 2012
[ 09:06 makc ] Original commit 
1.137 cad/Makefile
Connect librecad
Wed, 28 Dec 2011
[ 17:49 rene ] Original commit 
1.2713 MOVED
1.1202 audio/Makefile
1.18 audio/gnowavcut/Makefile
1.7 audio/gnowavcut/distinfo
1.3 audio/gnowavcut/pkg-descr
1.2 audio/gnowavcut/pkg-plist
1.136 cad/Makefile
1.35 cad/gtkwave/Makefile
1.8 cad/gtkwave/distinfo
1.2 cad/gtkwave/files/patch-configure

(Only the first 10 of 114 ports in this commit are shown above. View all ports for this commit)
Remove expired, unmaintained ports:
2011-11-30 textproc/skribe
2011-11-30 emulators/wahcade
2011-11-30 databases/keximdb: Depends on editors/koffice-kde3, which is
scheduled for deletion
2011-11-30 editors/koffice-kde3
2011-11-30 net/keepalived: Depends on net/ipvs, which is scheduled for deletion
2011-11-30 net/ipvs: Designed for FreeBSD 5.x, which is no longer supported
2011-11-30 databases/fireprofile
2011-12-01 audio/gnowavcut: Abandonware
2011-12-01 mail/demime: No upstream development since 2007
2011-12-03 x11/wmmsg: No more public distfiles
2011-12-03 x11-toolkits/libgtkeditor: No more supported upstream, not depend on
anymore.
2011-12-03 misc/demoniac: No more upstream, no more public distfiles
2011-12-03 cad/gtkwave: No more public distfiles, no more upstream
2011-12-07 databases/clip: No develop anymore for long
2011-12-09 x11-toolkits/gtkextra: no longer supported upstream, no more depend
on
Mon, 5 Sep 2011
[ 09:46 gahr ] Original commit 
1.2588 MOVED
1.135 cad/Makefile
1.45 cad/oregano/Makefile
1.15 cad/oregano/distinfo
1.3 cad/oregano/files/patch-SConstruct
1.5 cad/oregano/pkg-descr
1.19 cad/oregano/pkg-plist
1.4538 devel/Makefile
1.16 devel/jakelib2/Makefile
1.7 devel/jakelib2/distinfo

(Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
- Remove three deprecated ports of mine

2011-09-03 x11/ebuttons: Website has disappeared
2011-09-03 cad/oregano: Website has disappeared
2011-09-03 devel/jakelib2: Website has disappeared
Thu, 1 Sep 2011
[ 06:47 bapt ] Original commit 
1.672 LEGAL
1.2579 MOVED
1.159 astro/Makefile
1.20 astro/gkrellmoon/Makefile
1.5 astro/gkrellmoon/distinfo
1.2 astro/gkrellmoon/files/patch-CalcEphem.c
1.3 astro/gkrellmoon/files/patch-Makefile
1.2 astro/gkrellmoon/files/patch-gkrellmoon.c
1.4 astro/gkrellmoon/pkg-descr
1.3 astro/gkrellmoon/pkg-plist

(Only the first 10 of 130 ports in this commit are shown above. View all ports for this commit)
2011-09-01 astro/gkrellmoon: Abandonware
2011-09-01 astro/spacechart: Abandonware
2011-09-01 audio/adpcm: No more public distfiles
2011-09-01 audio/aube: Abandonware
2011-09-01 audio/festvox-aec: BROKEN for more than 6 month
2011-09-01 audio/gtkgep: Abandonware
2011-09-01 audio/gtkhirad: No more public distfiles
2011-09-01 audio/opmixer: No more upstream
2011-09-01 audio/swami: Abandonware
2011-09-01 audio/x11amp: Abandonware
2011-09-01 audio/xmms-sndstretch: No Master Site
2011-09-01 cad/linux-gid: No more public distfiles
2011-09-01 chinese/gbscript: No more public distfiles
2011-09-01 chinese/mplayer-fonts: No more public distfiles
2011-09-01 chinese/oxford: No more public distfiles
2011-09-01 chinese/vflib: No more public distfiles
2011-09-01 databases/mysql++: No more public distfiles
2011-09-01 databases/mysql_last_value: No Master Site
2011-09-01 databases/p5-DBIx-Table: No more public distfiles
Fri, 19 Aug 2011
[ 11:02 mr ] Original commit 
1.133 cad/Makefile
1.1 cad/openscad/Makefile
1.1 cad/openscad/distinfo
1.1 cad/openscad/files/patch-aa
1.1 cad/openscad/pkg-descr
1.1 cad/openscad/pkg-plist
Add openscad.
OpenSCAD is a software for creating 3D CAD objects.

Unlike most free software for creating 3D models, it does not focus on
the artistic aspects of 3D modelling but instead on the CAD aspects.
Thus it is more suitable for creating 3D models of machine parts but
perhaps not when creating computer-animated movies.

OpenSCAD is not an interactive modeller. Instead it is something like
a 3D-compiler that reads in a script file that describes the object
and renders the 3D model from this script file. This gives designers
full control over the modelling process and enables them to easily
change any step in the modelling process or make designes that are
defined by configurable parameters.

WWW: http://www.openscad.org/

Obtained from (slightly):       OpenBSD
Mon, 18 Apr 2011
[ 22:25 rene ] Original commit 
1.645 LEGAL
1.2396 MOVED
1.132 cad/Makefile
1.17 cad/tclspice/Makefile
1.3 cad/tclspice/distinfo
1.2 cad/tclspice/files/patch-src_Makefile.am
1.2 cad/tclspice/files/patch-src_frontend_aspice.c
1.2 cad/tclspice/files/patch-src_frontend_parser_complete.c
1.2 cad/tclspice/files/patch-src_frontend_resource.c
1.2 cad/tclspice/files/patch-src_frontend_subckt.c

(Only the first 10 of 499 ports in this commit are shown above. View all ports for this commit)
Remove most expired ports:
2011-04-17 cad/tclspice: has been broken for more than a year
2011-04-17 comms/hcfmdm: does not compile on 7.X or higher
2011-04-17 databases/mysqlcc: has been broken for almost a year
2011-04-17 devel/ruby-rjudy: does not compile on FreeBSD 7.x or newer
2011-04-17 devel/xfc: does not compile on FreeBSD 7.x or newer
2011-04-17 devel/lamson: has been broken for a half year
2011-04-17 devel/cocktail: does not build on FreeBSD 7.x or newer
2011-04-17 devel/djgpp-gcc: has been broken for half a year
2011-04-17 devel/gauche-sdl: has been broken for a year
2011-04-17 devel/gdb53-act: does not compile on FreeBSD 7.x and up
2011-04-17 editors/zed: does not compile on FreeBSD 7.x or newer
2011-04-17 games/aqbubble: does not compile on FreeBSD 7.x or newer
2011-04-17 graphics/libvisual-plugins: has been broken for 3 years
2011-04-17 japanese/roundcube: has been broken for almost a year
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Mon, 14 Feb 2011
[ 07:44 gahr ] Original commit 
1.131 cad/Makefile
1.1 cad/meshlab/Makefile
1.1 cad/meshlab/distinfo
1.1 cad/meshlab/files/patch-common_pluginmanager.cpp
1.1 cad/meshlab/pkg-descr
1.1 cad/meshlab/pkg-plist
- New port: cad/meshlab
  MeshLab is an open source, portable, and extensible system for the processing
  and editing of unstructured 3D triangular meshes.
  WWW: http://meshlab.sourceforge.net/
Wed, 5 Jan 2011
[ 07:58 hrs ] Original commit 
1.130 cad/Makefile
1.1 cad/layouteditor/Makefile
1.1 cad/layouteditor/distinfo
1.1 cad/layouteditor/files/patch-src-src.pro
1.1 cad/layouteditor/pkg-descr
Add cad/layouteditor, an IC/MEMS layout editor with the following features:
all angle, font generator, macros, boolean operations, design rule checker,
crossplatform compatible.  This supports Calma GDSII, OASIS (Open Artwork
System Interchange Standard), DXF, CIF (Caltech Intermediate Form).

WWW:    http://www.layouteditor.net/index.html
Tue, 4 Jan 2011
[ 21:15 thierry ] Original commit 
1.129 cad/Makefile
1.1 cad/salome-jobmanager/Makefile
1.1 cad/salome-jobmanager/files/patch-configure.ac
1.1 cad/salome-jobmanager/pkg-descr
1.1 cad/salome-jobmanager/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains Job manager module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/152396
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 21:14 thierry ] Original commit 
1.128 cad/Makefile
1.1 cad/salome-netgenplugin/Makefile
1.1 cad/salome-netgenplugin/files/patch-check_NETGEN.m4
1.1 cad/salome-netgenplugin/files/patch-check_NETGENPLUGIN.m4
1.1 cad/salome-netgenplugin/pkg-descr
1.1 cad/salome-netgenplugin/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains NETGENPLUGIN module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/152396
Submitted by:   Stas Timokhin <devel at stasyan.com>
Sat, 13 Nov 2010
[ 16:46 stefan ] Original commit 
1.127 cad/Makefile
1.22 cad/linux-eagle/Makefile
1.11 cad/linux-eagle/distinfo
1.2 cad/linux-eagle/files/eagle.sh
1.3 cad/linux-eagle/pkg-descr
1.2 cad/linux-eagle/pkg-message
1.11 cad/linux-eagle/pkg-plist
1.24 cad/linux-eagle5/Makefile
1.14 cad/linux-eagle5/distinfo
1.2 cad/linux-eagle5/files/pkg-deinstall.in

(Only the first 10 of 18 ports in this commit are shown above. View all ports for this commit)
- Update cad/linux-eagle5 to 5.10 and transfer maintainership to submitter.
- Remove cad/linux-eagle (submitter is maintainer).
- Remove german/linux-eagle (submitter is maintainer).

PR:             151153
Submitted by:   Thomas Zander <thomas.e.zander@googlemail.com>
Approved by:    Michael Durian <durian@shadetreesoftware.com> (old maintainer)
Wed, 21 Jul 2010
[ 09:57 ashish ] Original commit 
1.126 cad/Makefile
1.1 cad/qelectrotech/Makefile
1.1 cad/qelectrotech/distinfo
1.1 cad/qelectrotech/pkg-descr
1.1 cad/qelectrotech/pkg-plist
QElectroTech is a Qt4 application to design electric diagrams. It uses XML
files for elements and diagrams, and includes both a diagram editor and an
element editor.

WWW:    http://qelectrotech.org/

PR:             ports/146513
Submitted by:   Gvozdikov Veniamin <g.veniamin at googlemail.com>
Approved by:    pgj (mentor)
Mon, 24 May 2010
[ 14:00 thierry ] Original commit 
1.125 cad/Makefile
1.1 cad/kicad-library/Makefile
1.1 cad/kicad-library/distinfo
1.1 cad/kicad-library/pkg-descr
1.1 cad/kicad-library/pkg-message
1.1 cad/kicad-library/pkg-plist
Separate the libraries from the port cad/kicad.
Fri, 12 Feb 2010
[ 22:17 pgollucci ] Original commit 
1.124 cad/Makefile
1.1 cad/salome/Makefile
1.1 cad/salome/Makefile.ext
1.1 cad/salome/distinfo
1.1 cad/salome/pkg-descr
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains meta-port.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:17 pgollucci ] Original commit 
1.123 cad/Makefile
1.1 cad/salome-yacs/Makefile
1.1 cad/salome-yacs/files/patch-GenericGui.cxx
1.1 cad/salome-yacs/files/patch-SalomeOptimizerLoop.cxx
1.1 cad/salome-yacs/files/patch-bases_Test_Makefile.am
1.1 cad/salome-yacs/files/patch-configure.in.base
1.1 cad/salome-yacs/files/patch-engine_Dispatcher.hxx
1.1 cad/salome-yacs/files/patch-engine_Makefile.am
1.1 cad/salome-yacs/files/patch-engine_Node.hxx
1.1 cad/salome-yacs/files/patch-engine_Test_Makefile.am

(Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains YACS module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:16 pgollucci ] Original commit 
1.122 cad/Makefile
1.1 cad/salome-visu/Makefile
1.1 cad/salome-visu/files/patch-VisuGUI.h
1.1 cad/salome-visu/files/patch-VisuGUI_DeformedShapeAndScalarMapDlg.h
1.1 cad/salome-visu/files/patch-bin_Makefile.am
1.1 cad/salome-visu/files/patch-check_VISU.m4
1.1 cad/salome-visu/pkg-descr
1.1 cad/salome-visu/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains Post-pro (VISU) module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:16 pgollucci ] Original commit 
1.121 cad/Makefile
1.1 cad/salome-smesh/Makefile
1.1 cad/salome-smesh/files/patch-DriverMED_Makefile.am
1.1 cad/salome-smesh/files/patch-DriverSTL_R_SMDS_Mesh.cxx
1.1 cad/salome-smesh/files/patch-SMDS_MemoryLimit.cxx
1.1 cad/salome-smesh/files/patch-SMESH_Makefile.am
1.1 cad/salome-smesh/files/patch-SMESH_Mesh_i.cxx
1.1 cad/salome-smesh/files/patch-SMESH_SMDS_Mesh.cxx
1.1 cad/salome-smesh/files/patch-admlocal_unix_config_Makefile.am
1.1 cad/salome-smesh/files/patch-bin_Makefile.am

(Only the first 10 of 14 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains SMESH module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:16 pgollucci ] Original commit 
1.120 cad/Makefile
1.1 cad/salome-sierpinsky/Makefile
1.1 cad/salome-sierpinsky/files/patch-bin_Makefile.am
1.1 cad/salome-sierpinsky/pkg-descr
1.1 cad/salome-sierpinsky/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains SIERPINSKY module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:16 pgollucci ] Original commit 
1.119 cad/Makefile
1.1 cad/salome-randomizer/Makefile
1.1 cad/salome-randomizer/files/patch-bin_Makefile.am
1.1 cad/salome-randomizer/files/patch-check_RANDOMIZER.m4
1.1 cad/salome-randomizer/pkg-descr
1.1 cad/salome-randomizer/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains RANDOMIZER module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:15 pgollucci ] Original commit 
1.118 cad/Makefile
1.1 cad/salome-multipr/Makefile
1.1 cad/salome-multipr/files/patch-bin_Makefile.am
1.1 cad/salome-multipr/files/patch-configure.ac
1.1 cad/salome-multipr/pkg-descr
1.1 cad/salome-multipr/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains MULTIPR module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:15 pgollucci ] Original commit 
1.117 cad/Makefile
1.1 cad/salome-med/Makefile
1.1 cad/salome-med/files/patch-MEDSPLITTER_SCOTCHGraph.cxx
1.1 cad/salome-med/files/patch-MED_MEDMEM_define.hxx
1.1 cad/salome-med/files/patch-MED_MED_Common.hxx
1.1 cad/salome-med/files/patch-MED_MEDunvCr.cxx
1.1 cad/salome-med/files/patch-MED_V2_2_Wrapper.cxx
1.1 cad/salome-med/files/patch-MED_check_Med2.m4
1.1 cad/salome-med/files/patch-MED_check_metis.m4
1.1 cad/salome-med/files/patch-MED_check_scotch.m4

(Only the first 10 of 32 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains MED module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:15 pgollucci ] Original commit 
1.116 cad/Makefile
1.1 cad/salome-light/Makefile
1.1 cad/salome-light/files/patch-bin_Makefile.am
1.1 cad/salome-light/pkg-descr
1.1 cad/salome-light/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains LIGHT module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:14 pgollucci ] Original commit 
1.115 cad/Makefile
1.1 cad/salome-kernel/Makefile
1.1 cad/salome-kernel/files/patch-KERNEL-Container_i.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-MPIObject_i.hxx
1.1 cad/salome-kernel/files/patch-KERNEL-Makefile.am
1.1 cad/salome-kernel/files/patch-KERNEL-Receivers.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-SALOMEDSImpl_StudyBuilder.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-SALOME_Comm_i.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-SALOME_LifeCycleCORBA.hxx
1.1 cad/salome-kernel/files/patch-KERNEL-TestContainerManager.cxx

(Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains KERNEL module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:14 pgollucci ] Original commit 
1.114 cad/Makefile
1.1 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_CASCatch_CatchSignals.cxx
1.1 cad/salome-gui/files/patch-GUI_LightApp_Driver.cxx
1.1 cad/salome-gui/files/patch-GUI_QxGraph_CanvasView.cxx
1.1 cad/salome-gui/files/patch-GUI_ResourceExporter.cxx
1.1 cad/salome-gui/files/patch-GUI_SUIT_ResourceMgr.cxx
1.1 cad/salome-gui/files/patch-GUI_VTKViewer_ConvexTool.cxx
1.1 cad/salome-gui/files/patch-GUI_bin_Makefile.am
1.1 cad/salome-gui/files/patch-GUI_check_GUI.m4

(Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains GUI module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
[ 22:14 pgollucci ] Original commit 
1.113 cad/Makefile
1.1 cad/salome-geom/Makefile
1.1 cad/salome-geom/files/patch-admlocal_unix_configfiles_Makefile.am
1.1 cad/salome-geom/files/patch-bin_Makefile.am
1.1 cad/salome-geom/files/patch-build_configure
1.1 cad/salome-geom/files/patch-check_GEOM.m4
1.1 cad/salome-geom/files/patch-check_qt.m4
1.1 cad/salome-geom/files/patch-configure.ac
1.1 cad/salome-geom/pkg-descr
1.1 cad/salome-geom/pkg-plist
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains GEOM module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>
Fri, 18 Dec 2009
[ 12:49 miwi ] Original commit 
1.112 cad/Makefile
1.21 cad/fandango/Makefile
1.5 cad/fandango/distinfo
1.2 cad/fandango/pkg-descr
1.3 cad/fandango/pkg-plist
- Drop cad/fandango (no longer under development)
Sat, 7 Nov 2009
[ 09:34 bsam ] Original commit 
1.111 cad/Makefile
Connect cad/linux-eagle5 to the build.

Forgotten by:   bsam (me)
Requested by:   linimon
Tue, 27 Oct 2009
[ 08:26 mr ] Original commit 
1.110 cad/Makefile
Add kicad-devel to the build
Sat, 13 Jun 2009
[ 19:03 erwin ] Original commit 
1.1896 MOVED
1.109 cad/Makefile
1.6 cad/freecad/Makefile
1.2 cad/freecad/distinfo
1.3 cad/freecad/files/patch-configure
1.2 cad/freecad/files/patch-src_App_Application.cpp
1.2 cad/freecad/files/patch-src_App_FreeCADInit.py
1.2 cad/freecad/files/patch-src_Base_Documentation.cpp
1.2 cad/freecad/files/patch-src_Base_EnvMacros.h
1.2 cad/freecad/files/patch-src_Base_FileInfo.cpp

(Only the first 10 of 39 ports in this commit are shown above. View all ports for this commit)
Remove cad/freecad as it has been BROKEN for over 4 months.
Tue, 26 May 2009
[ 11:01 garga ] Original commit 
1.108 cad/Makefile
1.1 cad/p5-Verilog-Perl/Makefile
1.1 cad/p5-Verilog-Perl/distinfo
1.1 cad/p5-Verilog-Perl/pkg-descr
1.1 cad/p5-Verilog-Perl/pkg-plist
The Verilog-Perl library is a building point for Verilog support in the Perl
language. It includes:
* Verilog::Getopt which parses command line options similar to C++ and VCS.
* Verilog::Language which knows the language keywords and parses numbers.
* Verilog::Netlist which builds netlists out of Verilog files. This allows
  easy scripts to determine things such as the hierarchy of modules.
* Verilog::Parser invokes callbacks for language tokens.
* Verilog::Preproc preprocesses the language, and allows reading
  post-processed files right from Perl without temporary files.
* vpassert inserts PLIish warnings and assertions for any simulator.
* vppreproc preprocesses the complete Verilog 2001 and SystemVerilog language.
* vrename renames and cross-references Verilog symbols. Vrename creates Verilog
  cross references and makes it easy to rename signal and module names across
  multiple files. Vrename uses a simple and efficient three step process.
  First, you run vrename to create a list of signals in the design. You then
  edit this list, changing as many symbols as you wish. Vrename is then run a
  second time to apply the changes.

WWW:    http://www.veripool.org/wiki/verilog-perl

PR:             ports/134124
Submitted by:   Otacílio de Araújo Ramos Neto <otacilio.neto at
ee.ufcg.edu.br>
Mon, 12 Jan 2009
[ 09:44 stas ] Original commit 
1.107 cad/Makefile
1.1 cad/verilog-mode.el/Makefile
1.1 cad/verilog-mode.el/distinfo
1.1 cad/verilog-mode.el/pkg-descr
1.1 cad/verilog-mode.el/pkg-message
1.1 cad/verilog-mode.el/pkg-plist
- Add port for verilog-mode.el, Emacs Verilog editing mode.

WWW:    http://www.veripool.org/wiki/verilog-mode
Wed, 31 Dec 2008
[ 12:52 thierry ] Original commit 
1.106 cad/Makefile
1.1 cad/gmsh-occ/Makefile
1.1 cad/gmsh-occ/pkg-descr
Adding Gmsh with support of OpenCascade.
Sun, 17 Aug 2008
[ 20:22 db ] Original commit 
1.105 cad/Makefile
1.1 cad/basicdsp/Makefile
1.1 cad/basicdsp/distinfo
1.1 cad/basicdsp/files/basicdsp.1
1.1 cad/basicdsp/files/patch-Makefile
1.1 cad/basicdsp/files/patch-aboutdialog.cpp
1.1 cad/basicdsp/files/patch-book.cpp
1.1 cad/basicdsp/files/patch-book.h
1.1 cad/basicdsp/files/patch-gui.cpp
1.1 cad/basicdsp/pkg-descr
BasicDSP is an educational tool that makes it easy to experiment with simple
Digital Signal Processing algorithms for audio signals. The input can either
be taken from the sound card, or be a locally generated sine wave, white noise
or impulse signal. The output is fed to the sound card, as well as to a virtual
oscilloscope and spectrum analyzer.
Sat, 3 May 2008
[ 10:05 bms ] Original commit 
1.104 cad/Makefile
1.1 cad/gtkwave3/Makefile
1.1 cad/gtkwave3/distinfo
1.1 cad/gtkwave3/files/patch-configure
1.1 cad/gtkwave3/files/patch-doc__Makefile.in
1.1 cad/gtkwave3/files/patch-examples__Makefile.in
1.1 cad/gtkwave3/pkg-descr
Add GTKWave 3.1.9 port.
The 3.x train of GTKWave has significantly more new featured and bugfixes,
but would require introducing PORTEPOCH to replace cad/gtkwave.
[Timeout on feedback from cad/gtkwave maintainer.]
Sat, 26 May 2007
[ 19:26 thierry ] Original commit 
1.103 cad/Makefile
1.1 cad/freecad/Makefile
1.1 cad/freecad/distinfo
1.1 cad/freecad/files/patch-configure
1.1 cad/freecad/files/patch-src_App_Application.cpp
1.1 cad/freecad/files/patch-src_App_FreeCADInit.py
1.1 cad/freecad/files/patch-src_Base_Documentation.cpp
1.1 cad/freecad/files/patch-src_Base_EnvMacros.h
1.1 cad/freecad/files/patch-src_Base_FileInfo.cpp
1.1 cad/freecad/files/patch-src_Base_Parameter.cpp

(Only the first 10 of 37 ports in this commit are shown above. View all ports for this commit)
FreeCAD is an OpenSource CAD/CAE, based on OpenCasCade, QT and Python.

It features some key concepts like macro recording, workbenches, ability to run
as a server and dynamically loadable application extensions and it is designed
to be platform independent.

Warning: FreeCAD is still in ALPHA state and not in shape for end user usage!

<http://juergen-riegel.net/FreeCAD/Docu/>

Suggested by:   Pedro F. Giffuni <giffunip (at) yahoo.com>
Sun, 29 Apr 2007
[ 07:20 hrs ] Original commit 
1.102 cad/Makefile
1.1 cad/gdt/Makefile
1.1 cad/gdt/distinfo
1.1 cad/gdt/files/Makefile
1.1 cad/gdt/files/patch-Examples-gdsinfo
1.1 cad/gdt/files/patch-gdsStream.h
1.1 cad/gdt/pkg-descr
GDT (graphics data text) format translator written in C/C++ that
converts a binary gdsii file to a text format that is compact and
easy to parse.
[ 07:17 hrs ] Original commit 
1.101 cad/Makefile
1.1 cad/p5-GDS2/Makefile
1.1 cad/p5-GDS2/distinfo
1.1 cad/p5-GDS2/files/patch-lib-GDS2.pm.PL
1.1 cad/p5-GDS2/pkg-descr
p5-GDS2, a Perl module for quickly creating programs to read and/or
write GDS2 files.
Sat, 28 Apr 2007
[ 18:55 hrs ] Original commit 
1.100 cad/Makefile
1.1 cad/klayout/Makefile
1.1 cad/klayout/distinfo
1.1 cad/klayout/files/patch-build.sh
1.1 cad/klayout/files/patch-config-Makefile.conf
1.1 cad/klayout/files/patch-src-Makefile.main
1.1 cad/klayout/pkg-descr
KLayout is a Qt-based GDS2 viewer.
[ 17:01 hrs ] Original commit 
1.99 cad/Makefile
1.1 cad/findhier/Makefile
1.1 cad/findhier/distinfo
1.1 cad/findhier/files/patch-Makefile
1.1 cad/findhier/files/patch-findhier.h
1.1 cad/findhier/files/patch-fnames.c
1.1 cad/findhier/files/patch-magic.c
1.1 cad/findhier/files/patch-menu.c
1.1 cad/findhier/files/patch-names.c
1.1 cad/findhier/files/patch-reverse.c

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
FindHier is a road-map generator for Magic/CIF/gdsII/PCSTR/GED/TeX.

 ---When you have a large number of or big layout/schematic/TeX files which
 have possibly many top cells made by other people, how can you manage
 those layout/schematic/TeXs?  FH is written for that.  It can be useful
 up to your imagination or shell programming skill.  FH analyses the
 hidden hierarchies of those cells and shows you the hierarchy information.
[ 16:56 hrs ] Original commit 
1.98 cad/Makefile
1.1 cad/gdsreader/Makefile
1.1 cad/gdsreader/distinfo
1.1 cad/gdsreader/files/patch-Makefile
1.1 cad/gdsreader/pkg-descr
GDSreader is a simple Calma (GDSii) parser/printer tool.
Mon, 23 Apr 2007
[ 07:33 miwi ] Original commit 
1.17920 /CVSROOT/modules
1.1354 MOVED
1.853 audio/Makefile
1.24 audio/xmpeg3/Makefile
1.4 audio/xmpeg3/distinfo
1.7 audio/xmpeg3/files/patch-aa
1.3 audio/xmpeg3/pkg-descr
1.97 cad/Makefile
1.5 cad/geda-projectmanager/Makefile
1.2 cad/geda-projectmanager/distinfo

(Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
2007-04-12 cad/geda-projectmanager: project dead
2007-04-19 audio/xmpeg3: does not work
Sun, 1 Apr 2007
[ 09:05 thierry ] Original commit 
1.96 cad/Makefile
1.1 cad/opencascade-tutorial/Makefile
1.1 cad/opencascade-tutorial/distinfo
1.1 cad/opencascade-tutorial/files/patch-configure
1.1 cad/opencascade-tutorial/files/pkg-message.in
1.1 cad/opencascade-tutorial/pkg-descr
1.1 cad/opencascade-tutorial/pkg-plist
A Qt based application for tutorial to Open CASCADE Technology.
[ 09:04 thierry ] Original commit 
1.95 cad/Makefile
1.1 cad/opencascade/Makefile
1.1 cad/opencascade/distinfo
1.1 cad/opencascade/files/LICENSE.FreeBSD.in
1.1 cad/opencascade/files/patch-ros_adm_make_DRAWEXE_Makefile.in
1.1 cad/opencascade/files/patch-ros_adm_make_WOKSH_Makefile.in
1.1 cad/opencascade/files/patch-ros_configure
1.1 cad/opencascade/files/patch-ros_env.csh
1.1 cad/opencascade/files/patch-ros_env.ksh
1.1 cad/opencascade/files/patch-ros_src_DrawResources_InitEnvironment.tcl

(Only the first 10 of 64 ports in this commit are shown above. View all ports for this commit)
Open CASCADE Technology is a software development platform freely available in
open source. It includes components for 3D surface and solid modeling,
visualization, data exchange and rapid application development.

Open CASCADE Technology can be best applied in development of numerical
simulation software including CAD/CAM/CAE, AEC and GIS, as well as PDM
applications.

BUGS: the module WOK does not work, but the other modules (the most
interesting parts) are OK.
Fri, 22 Dec 2006
[ 09:09 miwi ] Original commit 
1.94 cad/Makefile
1.1 cad/scv/Makefile
1.1 cad/scv/distinfo
1.1 cad/scv/files/patch-Makefile.in
1.1 cad/scv/files/patch-configure
1.1 cad/scv/files/patch-scripts-Makefile.in
1.1 cad/scv/files/patch-scripts-copyExamples.sh
1.1 cad/scv/files/patch-scripts-copyFiles.sh.in
1.1 cad/scv/files/patch-src-scv-scv_init_seed.cpp
1.1 cad/scv/pkg-descr
The SystemC Verification (SCV) library is an extension library to SystemC
which adds advanced verification capabilities to SystemC, including
constrained randomization, complex constraint solvers, data-structure
creation, Transaction Level Modeling (TLM), concurrency, and dynamic
resource allocation management.

WWW:    http://www.systemc.org/

PR:             ports/106822
Submitted by:   Peter Johnson
Sun, 5 Nov 2006
[ 20:51 alepulver ] Original commit 
1.93 cad/Makefile
1.1 cad/freehdl/Makefile
1.1 cad/freehdl/distinfo
1.1 cad/freehdl/pkg-descr
1.1 cad/freehdl/pkg-plist
The goals of the FreeHDL project are to develop a VHDL simulator that has
a graphical waveform viewer and a source level debugger. It also aims at
VHDL-93 compliancy. The project is at a very early development stage.

WWW: http://www.freehdl.seul.org/

PR:             ports/104634
Submitted by:   lon_kamikaze at gmx.de
Sat, 30 Sep 2006
[ 09:41 stas ] Original commit 
1.92 cad/Makefile
1.1 cad/electric-ng/Makefile
1.1 cad/electric-ng/distinfo
1.1 cad/electric-ng/files/electric-ng.in
1.1 cad/electric-ng/pkg-descr
Electric is a sophisticated electrical CAD system that can handle
many forms of circuit design, including:
 - Custom IC layout (ASICs)
 - Schematic drawing
 - Hardware description language specifications

Author: Static Free Software & Sun Microsystems, Inc.
WWW:    http://www.staticfreesoft.com/

PR:             ports/100355
Submitted by:   me (stas)
Approved by:    sem (mentor)
Tue, 1 Aug 2006
[ 20:22 itetcu ] Original commit 
1.91 cad/Makefile
1.1 cad/gspiceui/Makefile
1.1 cad/gspiceui/distinfo
1.1 cad/gspiceui/files/patch-src_Makefile
1.1 cad/gspiceui/pkg-descr
1.1 cad/gspiceui/pkg-plist
This port provides a GUI for two freely available SPICE electronic circuit
simulation engines: GNU-Cap and Ng-Spice.

Current features:
        Import gschem schematic files using gentlist.
        Load and parse circuit description (net list) files.
        Provides a GUI interface for GNU-Cap OP, DC, AC and Transient
                analyses and generates appropriate simulator commands
                based on user input.
        Provides a GUI interface for Ng-Spice DC, AC and Transient
                analyses and generates appropriate simulator commands
                based on user input.
        The raw output may be viewed for any processes initiated by gspiceui.
        Formatting of simulator output so that it may be plotted using gwave.

WWW: http://www.geda.seul.org/tools/gspiceui/index.html

PR:             ports/99357
Submitted by:   Stanislav Sedov <ssedov at mbsd.msk.ru>
Sat, 29 Jul 2006
[ 21:10 itetcu ] Original commit 
1.90 cad/Makefile
1.1 cad/adms/Makefile
1.1 cad/adms/distinfo
1.1 cad/adms/files/patch-configure
1.1 cad/adms/pkg-descr
1.1 cad/adms/pkg-plist
ADMS is a code generator that converts electrical compact device models
specified in high-level description language into ready-to-compile c code for
the API of spice simulators.

WWW:    http://mot-adms.sourceforge.net/

PR:             ports/101014
Submitted by:   Stanislav Sedov <ssedov at mbsd.msk.ru>
Sun, 16 Jul 2006
[ 03:53 rafan ] Original commit 
1.89 cad/Makefile
1.19 cad/gnetlist/Makefile
1.9 cad/gnetlist/distinfo
1.2 cad/gnetlist/files/patch-src_Makefile.in
1.4 cad/gnetlist/pkg-descr
1.7 cad/gnetlist/pkg-plist
1.17 cad/gschem/Makefile
1.9 cad/gschem/distinfo
1.2 cad/gschem/files/patch-Makefile.in
1.4 cad/gschem/pkg-descr

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
- gschem -> geda-gschem
- gnetlist -> geda-netlist

PR:             ports/100222, ports/100230
Submitted by:   maintainer
Tue, 11 Jul 2006
[ 19:34 itetcu ] Original commit 
1.88 cad/Makefile
1.1 cad/jspice3/Makefile
1.1 cad/jspice3/distinfo
1.1 cad/jspice3/files/patch-conf+unixconf+mkheader.0
1.1 cad/jspice3/files/patch-src+lib+fte+misccoms.c
1.1 cad/jspice3/pkg-descr
1.1 cad/jspice3/pkg-plist
Jspice3 is a circuit simulator developed to meet the needs of researchers
working with superconducting Josephson junction circuits, yet the program
has the flexibility and power to meet the needs of other technologies.

Jspice3 is an adaptation of the Berkeley Spice3f4 program, with added
features. One added feature is a built-in graphical input front end for
schematic capture. While displayed, simulations can be run and data
plotted through this graphical interface.

While not as powerful or as pretty as the Xic graphical interface, it
holds its own in functionality.

A significantly enhanced output plotting capability is provided, and
Jspice3 has enhanced script interpretation capability.

WWW:    http://www.wrcad.com/jspice3.html

PR:             ports/93958
Submitted by:   Pedro F. Giffuni

Pedro can't maintain this port anymore and Stanislav Sedov agree to maintiant
it.
Tue, 4 Jul 2006
[ 15:31 garga ] Original commit 
1.87 cad/Makefile
1.1 cad/geda-examples/Makefile
1.1 cad/geda-examples/distinfo
1.1 cad/geda-examples/files/examples
1.1 cad/geda-examples/pkg-descr
1.1 cad/geda-examples/pkg-plist
Various examples for gEDA suite. This includes:

  1) gTAG - USB to JTAG interface
  2) lightning_detector - a lightning detector
  3) RF_Amp - schematics and associated materials for a SPICE model
  4) TwoStageAmp - a two stage amplifier SPICE playpen

WWW: http://www.geda.seul.org

PR:             ports/99564
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>
[ 15:26 garga ] Original commit 
1.86 cad/Makefile
1.1 cad/geda-docs/Makefile
1.1 cad/geda-docs/distinfo
1.1 cad/geda-docs/pkg-descr
Various documentation for gEDA suite, including architecture-related
docs as well as examples of usage and tutorials.

WWW: http://www.geda.seul.org

PR:             ports/99565
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>
Mon, 26 Jun 2006
[ 22:11 pav ] Original commit 
1.85 cad/Makefile
1.1 cad/geda-projectmanager/Makefile
1.1 cad/geda-projectmanager/distinfo
1.1 cad/geda-projectmanager/pkg-descr
1.1 cad/geda-projectmanager/pkg-plist
The gEDA project manager suite.

WWW: http://www.geda.seul.org

PR:             ports/99481
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>
[ 22:09 pav ] Original commit 
1.84 cad/Makefile
1.1 cad/geda-gattrib/Makefile
1.1 cad/geda-gattrib/distinfo
1.1 cad/geda-gattrib/files/patch-src_Makefile.in
1.1 cad/geda-gattrib/pkg-descr
1.1 cad/geda-gattrib/pkg-plist
Gattrib is gEDA's attribute editor.

WWW: http://www.geda.seul.org

PR:             ports/99480
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>
[ 18:34 pav ] Original commit 
1.83 cad/Makefile
1.1 cad/tclspice/Makefile
1.1 cad/tclspice/distinfo
1.1 cad/tclspice/files/patch-src_Makefile.am
1.1 cad/tclspice/files/patch-src_frontend_aspice.c
1.1 cad/tclspice/files/patch-src_frontend_parser_complete.c
1.1 cad/tclspice/files/patch-src_frontend_resource.c
1.1 cad/tclspice/files/patch-src_spicelib_devices_names.c
1.1 cad/tclspice/files/patch-src_spicepp.pl.in
1.1 cad/tclspice/files/patch-src_spicewish

(Only the first 10 of 16 ports in this commit are shown above. View all ports for this commit)
TclSpice is an improved version of Berkeley Spice designed to be used with
the Tcl/Tk scripting language. The project is open-source (BSD license)
and based upon the NG-Spice source code base with many improvements

Features and Improvements
 - Fully Tcl scriptable - installs with 'package require spice' statement
 - Hspice syntax (SpicePP).
 - GUI interfaces, various (Tk).
 - SpiceWish (BLT graph widget)
 - BLT (tcl compatible) vectors for storage, manipulation and arithmetic
        upon Spice waveforms.
 - Xspice additions (Georgia Tech).
 - Trigger upon waveform events.
 - Spice 'simulator state' save and restore for rapid 'what-if' simulations
        (no longer need to re-simulate from the beginning each time a
        device value is changed).

Author: Stefan Jones <stefan.jones@multigig.com>
WWW:    http://tclspice.sourceforge.net/

PR:             ports/99399
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>
Mon, 3 Apr 2006
[ 19:57 thierry ] Original commit 
1.82 cad/Makefile
1.1 cad/feappv/Makefile
1.1 cad/feappv/distinfo
1.1 cad/feappv/files/patch-makefile.in
1.1 cad/feappv/pkg-descr
1.1 cad/feappv/pkg-plist
Add feappv 2.0, finite Element Analysis Program "personal version".

This is a FEA program used in a classic FEM book. A complete (commercial)
version is available here:

        <http://www.ce.berkeley.edu/~rlt/feap/>

The "personal version" is very limited, but it keeps the same format as
the complete (commercial) version and cad/netgen can produce files for it.

PR:             ports/95210
Submitted by:   Pedro F. Giffuni <giffunip (at) asme.org>
Fri, 3 Feb 2006
[ 22:19 thierry ] Original commit 
1.81 cad/Makefile
1.1 cad/scotch/Makefile
1.1 cad/scotch/distinfo
1.1 cad/scotch/files/patch-src_Make.inc_Makefile.inc.FreeBSD
1.1 cad/scotch/pkg-descr
1.1 cad/scotch/pkg-plist
SCOTCH is a software package and libraries for graph, mesh and hypergraph
partitioning, static mapping, and sparse matrix block ordering.

Its purpose of Scotch is to apply graph theory, with a divide and conquer
approach, to scientific computing problems such as graph and mesh partitioning,
static mapping, and sparse matrix ordering, in application domains ranging from
structural mechanics to operating systems or bio-chemistry.

Note: there is an older tarball included in Aster's distfile, but I prefer
a separate distfile from the official site.
Thu, 29 Dec 2005
[ 03:48 edwin ] Original commit 
1.80 cad/Makefile
1.1 cad/gplcver/Makefile
1.1 cad/gplcver/distinfo
1.1 cad/gplcver/pkg-descr
[NEW PORT] cad/gplcver: A Verilog HDL simulator

        GPL Cver is a full 1995 P1364 Verilog standard HDL simulator.
        It also implements some of the 2001 P1364 standard features
        including all three PLI interfaces (tf_, acc_ and vpi_) as
        defined in the 2001 Language Reference Manual (LRM).

        Verilog is the name for both a language for describing
        electronic hardware called a hardware description language
        (HDL) and the name of the program that simulates HDL circuit
        descriptions to verify that described circuits will function
        correctly when the are constructed. Verilog is used only
        for describing digital logic circuits. Other HDLs such as
        Spice are used for describing analog circuits. There is an
        IEEE standard named P1364 that standardizes the Verilog HDL
        and the behavior of Verilog simulators.  Verilog is officially
        defined in the IEEE P1364 Language Reference Manual (LRM)
        that can be purchased from IEEE. There are many good books
        for learning that teach the Verilog HDL and/or that teach
        digital circuit design using Verilog.

        WWW: http://www.pragmatic-c.com/gpl-cver/

PR:             ports/80968
Submitted by:   Ying-Chieh Liao <ijliao@csie.nctu.edu.tw>
Sun, 18 Dec 2005
[ 11:23 lawrance ] Original commit 
1.79 cad/Makefile
1.1 cad/systemc/Makefile
1.1 cad/systemc/distinfo
1.1 cad/systemc/files/patch-configure.in
1.1 cad/systemc/pkg-descr
1.1 cad/systemc/pkg-plist
Add systemc 2.1.v1, a modeling platform for system-level C++ models.

PR:             ports/89987
Submitted by:   Daniel Thiele
Thu, 8 Dec 2005
[ 23:30 thierry ] Original commit 
1.78 cad/Makefile
1.1 cad/kicad/Makefile
1.1 cad/kicad/distinfo
1.1 cad/kicad/files/patch-include__fctsys.h
1.1 cad/kicad/files/patch-libs.FreeBSD
1.1 cad/kicad/files/patch-makefile.gtk
1.1 cad/kicad/files/patch-pcbnew__class_module.cpp
1.1 cad/kicad/pkg-descr
1.1 cad/kicad/pkg-message
1.1 cad/kicad/pkg-plist
Add Kicad, a software for the creation of electronic schematic
diagrams and printed circuit board artwork.

Kicad is a set of four softwares and a project manager:

    * Eeschema: Schematic entry.
    * Pcbnew: Board editor.
    * Gerbview: GERBER viewer (photoplotter documents).
    * Cvpcb: footprint selector for components used in the circuit design.
    * Kicad: project manager.
Sat, 5 Nov 2005
[ 09:07 kris ] Original commit 
1.672 audio/Makefile
1.10 audio/musicbox/Makefile
1.5 audio/musicbox/distinfo
1.4 audio/musicbox/files/patch-ListView.cpp
1.2 audio/musicbox/files/patch-ListView.h
1.4 audio/musicbox/files/patch-Makefile
1.4 audio/musicbox/files/patch-MultiListBox.h
1.4 audio/musicbox/files/patch-player.cpp
1.4 audio/musicbox/files/patch-qktstreelist.cpp
1.5 audio/musicbox/pkg-descr

(Only the first 10 of 583 ports in this commit are shown above. View all ports for this commit)
Remove expired ports
Thu, 8 Sep 2005
[ 15:34 garga ] Original commit 
1.13102 /CVSROOT/modules
1.744 MOVED
1.76 cad/Makefile
1.2 cad/fig2sxd/Makefile
1.2 cad/fig2sxd/distinfo
1.2 cad/fig2sxd/files/patch-Makefile
1.2 cad/fig2sxd/pkg-descr
1.845 graphics/Makefile
1.1 graphics/fig2sxd/Makefile
1.1 graphics/fig2sxd/distinfo

(Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
Move recently added port cad/fig2sxd to a new and more accurate category
graphics, with extra category converters.

Pointed by:     danfe
Approved by:    maintainer
[ 12:00 garga ] Original commit 
1.75 cad/Makefile
1.1 cad/fig2sxd/Makefile
1.1 cad/fig2sxd/distinfo
1.1 cad/fig2sxd/files/patch-Makefile
1.1 cad/fig2sxd/pkg-descr
Add fig2sxd 0.13, convert .xfig files to the OpenOffice draw format.

PR:             ports/85794
Submitted by:   Emanuel Haupt <ehaupt@critical.ch>
Sat, 11 Jun 2005
[ 19:53 des ] Original commit 
1.74 cad/Makefile
1.1 cad/qucs/Makefile
1.1 cad/qucs/distinfo
1.1 cad/qucs/files/patch-configure
1.1 cad/qucs/pkg-descr
1.1 cad/qucs/pkg-plist
Graphical circuit design and simulation tool.
Wed, 16 Mar 2005
[ 12:49 barner ] Original commit 
1.73 cad/Makefile
1.1 cad/linux-gid/Makefile
1.1 cad/linux-gid/distinfo
1.1 cad/linux-gid/files/patch-info::faq.info
1.1 cad/linux-gid/files/patch-info::gid.info
1.1 cad/linux-gid/files/patch-info::ptype.info
1.1 cad/linux-gid/pkg-descr
1.1 cad/linux-gid/pkg-plist
Add linux-gid 7.4.9b,
a graphical pre- and post-processor for
numerical simulation programs.

PR:             ports/78383
Submitted by:   Pedro Giffuni
Approved by:    arved (mentor)
Fri, 4 Mar 2005
[ 07:36 ijliao ] Original commit 
1.72 cad/Makefile
1.1 cad/impact/Makefile
1.1 cad/impact/distinfo
1.1 cad/impact/files/impact.in
1.1 cad/impact/files/impactgui.in
1.1 cad/impact/pkg-descr
add impact 0.5.3
Dynamic Finite Element Program Suite
Sun, 20 Feb 2005
[ 22:00 thierry ] Original commit 
1.71 cad/Makefile
1.1 cad/brlcad/Makefile
1.1 cad/brlcad/distinfo
1.1 cad/brlcad/files/mged.sh
1.1 cad/brlcad/files/patch-Makefile.in
1.1 cad/brlcad/files/patch-sh_vers.sh
1.1 cad/brlcad/files/patch-src+librt+g_bot_include.c
1.1 cad/brlcad/pkg-descr
1.1 cad/brlcad/pkg-message
1.1 cad/brlcad/pkg-plist
Add brlcad 7.0.4, CSG modelling system from the US Balistic
Research Laboratory.

PR:             76122
Submitted by:   Pedro F. Giffuni
Sat, 22 Jan 2005
[ 16:27 thierry ] Original commit 
1.70 cad/Makefile
1.1 cad/z88/Makefile
1.1 cad/z88/distinfo
1.1 cad/z88/files/patch-dyn88v.c
1.1 cad/z88/files/patch-vp88.c
1.1 cad/z88/files/patch-z88.fcd
1.1 cad/z88/files/patch-z88.mk.kernel
1.1 cad/z88/files/patch-z88.mk.other
1.1 cad/z88/files/z88.sh
1.1 cad/z88/pkg-descr

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Add z88 11.0, a compact Finite Element Analysis System.

PR:             75698
Submitted by:   Pedro F. Giffuni.
Mon, 15 Nov 2004
[ 22:51 thierry ] Original commit 
1.69 cad/Makefile
1.2 cad/triangle/Makefile
1.2 cad/triangle/distinfo
1.2 cad/triangle/files/patch-makefile
1.2 cad/triangle/files/patch-showme.c
1.2 cad/triangle/pkg-descr
1.295 math/Makefile
1.1 math/triangle/Makefile
1.1 math/triangle/distinfo
1.1 math/triangle/files/patch-makefile

(Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
Add triangle 1.5, a Two-Dimensional Quality Mesh Generator and
Delaunay Triangulator.

Change category from cad to math.

Requested by:   Pedro F. Giffuni
Approved by:    marcus
[ 10:37 thierry ] Original commit 
1.68 cad/Makefile
1.1 cad/triangle/Makefile
1.1 cad/triangle/distinfo
1.1 cad/triangle/files/patch-makefile
1.1 cad/triangle/files/patch-showme.c
1.1 cad/triangle/pkg-descr
Add triangle 1.5, a Two-Dimensional Quality Mesh Generator and
Delaunay Triangulator.
Thu, 26 Aug 2004
[ 09:38 ijliao ] Original commit 
1.67 cad/Makefile
1.1 cad/dxf2fig/Makefile
1.1 cad/dxf2fig/distinfo
1.1 cad/dxf2fig/pkg-descr
add dxf2fig 2.07
DXF to FIG converter
Mon, 5 Jul 2004
[ 21:02 pav ] Original commit 
1.66 cad/Makefile
1.1 cad/dinotrace/Makefile
1.1 cad/dinotrace/distinfo
1.1 cad/dinotrace/pkg-descr
Add dinotrace, a mature signal waveform viewer used to debug digital design
simulations.

PR:             ports/68688
Submitted by:   Joachim Strombergson <watchman@ludd.ltu.se>
Thu, 13 May 2004
[ 18:51 hrs ] Original commit 
1.65 cad/Makefile
1.1 cad/alliance/Makefile
1.1 cad/alliance/distinfo
1.1 cad/alliance/files/patch-exp::src::ht.c
1.1 cad/alliance/files/patch-sea::src::sea.sh
1.1 cad/alliance/files/patch-sea::src::seplace.sh
1.1 cad/alliance/files/patch-sea::src::seroute.sh
1.1 cad/alliance/files/pkg-message.in
1.1 cad/alliance/files/srcdirs.list
1.1 cad/alliance/pkg-descr

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Add cad/alliance, which is a complete set of free CAD tools and
portable libraries for VLSI design.  It includes a VHDL compiler
and simulator, logic synthesis tools, automatic place and route
tools, and portable CMOS libraries.

Approved by:    linimon (mentor)
Wed, 5 May 2004
[ 19:57 thierry ] Original commit 
1.64 cad/Makefile
1.1 cad/netgen/Makefile
1.1 cad/netgen/distinfo
1.1 cad/netgen/files/patch-Makefile
1.1 cad/netgen/files/patch-demoapp::Makefile
1.1 cad/netgen/files/patch-demoapp::demoapp.cpp
1.1 cad/netgen/files/patch-libsrc::makefile.inc
1.1 cad/netgen/files/patch-libsrc::makefile.mach.LINUX
1.1 cad/netgen/files/patch-ngtcltk::ngappinit.cpp
1.1 cad/netgen/pkg-descr

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Add netgen 4.3.1, an automatic 3D tetrahedral mesh generator.
Fri, 2 Apr 2004
[ 07:29 kris ] Original commit 
1.5 accessibility/Makefile
1.2 accessibility/pkg/COMMENT
1.5 arabic/Makefile
1.2 arabic/pkg/COMMENT
1.96 archivers/Makefile
1.3 archivers/pkg/COMMENT
1.78 astro/Makefile
1.3 astro/pkg/COMMENT
1.505 audio/Makefile
1.3 audio/pkg/COMMENT

(Only the first 10 of 120 ports in this commit are shown above. View all ports for this commit)
Remove category pkg/COMMENT files in favour of a COMMENT variable in the
category makefile.

Submitted by:   Matthew Seaman <m.seaman@infracaninophile.co.uk>
PR:             59651
Sun, 28 Mar 2004
[ 12:07 mr ] Original commit 
1.62 cad/Makefile
1.1 cad/qcad-partslib/Makefile
1.1 cad/qcad-partslib/distinfo
1.1 cad/qcad-partslib/pkg-descr
add qcad-partslib the parts-library for qcad.
Sat, 20 Mar 2004
[ 19:06 mat ] Original commit 
1.9698 /CVSROOT/modules
1.61 cad/Makefile
1.320 databases/Makefile
1.277 editors/Makefile
1.670 graphics/Makefile
1.10 hungarian/Makefile
1.503 mail/Makefile
1.1249 net/Makefile
1.12 polish/Makefile
1.656 textproc/Makefile

(Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
Reorder those files
Fri, 20 Feb 2004
[ 01:58 ijliao ] Original commit 
1.60 cad/Makefile
1.1 cad/fandango/Makefile
1.1 cad/fandango/distinfo
1.1 cad/fandango/pkg-descr
1.1 cad/fandango/pkg-plist
add fandango 0.2.5
A python scripted 3D CAD application
Tue, 9 Dec 2003
[ 19:25 glewis ] Original commit 
1.59 cad/Makefile
1.5 cad/metis-edf/Makefile
1.3 cad/metis-edf/distinfo
1.3 cad/metis-edf/files/patch-CONFIG::configure
1.2 cad/metis-edf/files/patch-Lib::proto.h
1.3 cad/metis-edf/files/patch-Programs::Makefile
1.2 cad/metis-edf/files/patch-Test::Makefile
1.2 cad/metis-edf/pkg-descr
1.2 cad/metis-edf/pkg-plist
. Remove metis-edf after a repo copy to the math category.

PR:             58178
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>
Wed, 12 Nov 2003
[ 02:01 ijliao ] Original commit 
1.58 cad/Makefile
1.1 cad/pythoncad/Makefile
1.1 cad/pythoncad/distinfo
1.1 cad/pythoncad/pkg-descr
1.1 cad/pythoncad/pkg-plist
add pythoncad release 10
An open-source CAD package built designed around Python
Sat, 8 Nov 2003
[ 09:23 glewis ] Original commit 
1.57 cad/Makefile
1.19 cad/kaskade/Makefile
1.3 cad/kaskade/distinfo
1.6 cad/kaskade/files/patch-aa
1.2 cad/kaskade/files/patch-ab
1.2 cad/kaskade/files/patch-ac
1.2 cad/kaskade/files/patch-ba
1.2 cad/kaskade/files/patch-bb
1.2 cad/kaskade/files/patch-bc
1.2 cad/kaskade/files/patch-ca

(Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
. Remove kaskade port after repo copy to math category.

PR:             58178
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>
[ 09:07 glewis ] Original commit 
1.56 cad/Makefile
1.30 cad/felt/Makefile
1.5 cad/felt/distinfo
1.5 cad/felt/files/patch-aa
1.4 cad/felt/files/patch-ab
1.3 cad/felt/files/patch-ac
1.2 cad/felt/files/patch-ad
1.2 cad/felt/files/patch-src+Patchwork+oogl+h
1.2 cad/felt/files/patch-src+Velvet+opengl+c
1.7 cad/felt/pkg-descr

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
. Remove felt port now its been repo copied to the science category.

PR:             58178
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>
Fri, 10 Oct 2003
[ 05:16 edwin ] Original commit 
1.55 cad/Makefile
1.1 cad/admesh/Makefile
1.1 cad/admesh/distinfo
1.1 cad/admesh/pkg-descr
1.1 cad/admesh/pkg-plist
NEW port CAD/admesh

        A tool to analyze STL (stereolitholigraphy) files.

PR:             ports/52997
Submitted by:   Pedro F. Giffuni <giffunip@yahoo.com>
Fri, 8 Aug 2003
[ 03:33 kris ] Original commit 
1.54 cad/Makefile
1.15 cad/sis/Makefile
1.2 cad/sis/distinfo
1.4 cad/sis/files/Makefile.FreeBSD
1.3 cad/sis/files/patch-ab
1.2 cad/sis/files/patch-ac
1.2 cad/sis/files/patch-ad
1.2 cad/sis/files/patch-ae
1.2 cad/sis/files/patch-af
1.2 cad/sis/files/patch-ag

(Only the first 10 of 35 ports in this commit are shown above. View all ports for this commit)
As announced on May 6, remove the broken sis port.

Number of commits found: 120 (showing only 100 on this page)

1 | 2  »  

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
bugzilla40*Apr 18
bugzilla40*Apr 18
bugzilla42*Apr 18
bugzilla42*Apr 18
bugzilla44*Apr 18
bugzilla44*Apr 18
curlApr 11
dbus-glibApr 11
libaudiofileApr 11
linux-f10-curlApr 11
linux-f10-dbus-glibApr 11
linux-f10-libaudiofileApr 11
linux-f10-nas-libsApr 11
linux-f10-openldapApr 11
mingw32-openssl*Apr 11

13 vulnerabilities affecting 18 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24362
Broken 174
Deprecated 86
Ignore 526
Forbidden 4
Restricted 263
No CDROM 108
Vulnerable 29
Expired 8
Set to expire 71
Interactive 22
new 24 hours 3
new 48 hours6
new 7 days17
new fortnight37
new month146

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.