chipmunk 5.64_3 cad =2

An electronic CAD system

There is no maintainer for this port.
Any concerns regarding this port should be directed to the FreeBSD Ports mailing list via ports@FreeBSD.org
Port Added: unknown
License: not specified in port

  		    Chipmunk CAD  (Oct 1998 Revision)
		    -------- ---   --- ---- --------

This directory contains a revised public beta-test version of the
Caltech electronic CAD distribution. This distribution contains tools
for schematic capture, netlist creation, and analog and digital
simulation (log), IC mask layout, extraction, and DRC (wol), simple
chip compilation (wolcomp), MOSIS fabrication request generation
(mosis), netlist comparison (netcmp), data plotting (view) and
postscript graphics editing (until). These tools were used exclusively
for the design and test of all the integrated circuits described in
Carver Mead's book "Analog VLSI and Neural Systems".  Until was used
as the primary tool for figure creation for the book.  The directory
also contains an example of an analog VLSI chip that was designed and
fabricated with these tools, and an example of an Actel
field-programmable gate array design that was simulated and converted
to Actel format with these tools (example).

These tools were originally written for HP 200 Series ("Chipmunk")
computers, and were later ported to Unix and the X Windows System.

WWW: http://www.cs.berkeley.edu/~lazzaro/chipmunk/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: devel/gmake, x11/libX11
Required To Run: x11/libX11
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/cad/chipmunk/ && make install clean
To add the package: pkg_add -r chipmunk

---

Configuration Options

     No options to configure

---

Master Sites:

http://www.cs.berkeley.edu/~lazzaro/chipmunk/pickup/sources/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/chipmunk/

- Remove outdated version checks

Reviewed by:    nox

- Get Rid MD5 support

Remove a piece of dead code from chipmunk.

This seems to be the only piece of code in the entire ports tree which
uses getpw(3) and it seems to be dead code anyway.

Approved by:    beat
Feature safe:   yes

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Mark as broken on sparc64-7: fails to install.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

remove USE_REINPLACE for all ports with categories starting with C

- Add SHA256

Upgrade to 5.64 and unbreak.

BROKEN: Size mismatch

Update to version 5.63

PR:             ports/77759
Submitted by:   am Lawrance <boris at brooknet.com.au>

Broken pkg-plist on alpha

Approved by:    portmgr (self)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Add SIZE.

update chipmunk to 5.62 which unbreaks the CURRENT build

BROKEN on 5.x: does not compile

Trim pkg-descr and unbreak on 5.0

PR:             ports/46824
Submitted by:   Miguel Mendez <flynn@energyhq.homeip.net>

De-pkg-comment.

Update WWW and MASTER_SITES.

PR:             ports/48137
Submitted by:   MA, Dunzi <tadalunch@sources.redhat.com>

upgrade to 5.59

PR:             38227
Submitted by:   Ports Fury

Make the share files' installation permission safe.    

Convert category cad to new layout.  

15 vulnerabilities affecting 34 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities