| non port: cad/gnucap/Makefile |
|
CVSWeb
|
Number of commits found: 22 |
|
Wed, 18 Jun 2008
|
[ 21:15 stas ] 
1.24 cad/gnucap/Makefile
1.11 cad/gnucap/distinfo
1.2 cad/gnucap/files/patch-examples_Makefile.in
1.3 cad/gnucap/files/patch-man_Makefile.in
1.4 cad/gnucap/pkg-descr
1.7 cad/gnucap/pkg-plist
- Update to 2008.06.08.
|
|
Mon, 23 Jul 2007
|
[ 10:36 rafan ]
1.19 archivers/dpkg/Makefile
1.54 archivers/gtar/Makefile
1.21 archivers/gzip/Makefile
1.37 archivers/libarchive/Makefile
1.21 astro/starplot/Makefile
1.10 astro/tclgeomap/Makefile
1.11 astro/tkgeomap/Makefile
1.23 audio/audacity-devel/Makefile
1.10 audio/checkmate/Makefile
1.21 audio/cmus/Makefile
(Only the first 10 of 437 ports in this commit are shown above.  )
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
|
|
Tue, 10 Apr 2007
|
[ 23:33 stas ]
1.22 cad/gnucap/Makefile
1.10 cad/gnucap/distinfo
- Update to 2007.03.29.
|
|
Mon, 12 Mar 2007
|
[ 21:31 stas ]
1.21 cad/gnucap/Makefile
1.9 cad/gnucap/distinfo
1.2 cad/gnucap/files/patch-doc_Makefile.in
1.2 cad/gnucap/files/patch-man_Makefile.in
1.6 cad/gnucap/pkg-plist
- Update to 2007.02.21.
|
|
Sat, 29 Jul 2006
|
[ 20:34 miwi ]
1.20 cad/gnucap/Makefile
1.8 cad/gnucap/distinfo
1.1 cad/gnucap/files/patch-doc_Makefile.in
1.1 cad/gnucap/files/patch-examples_Makefile.in
1.1 cad/gnucap/files/patch-man_Makefile.in
1.1 cad/gnucap/files/patch-modelgen_md.h
1.1 cad/gnucap/files/patch-src_md.h
1.5 cad/gnucap/pkg-plist
- Pass maintainership to submitter
- Update to 2006.07.08
PR: ports/100809
Submitted by: Stanislav Sedov <ssedov(at)mbsd.msk.ru>
Approved by: krion (mentor)
|
|
Mon, 24 Jul 2006
|
[ 13:21 jmelo ]
1.19 cad/gnucap/Makefile
- Remove bad site:
* http://www.kettering.edu/~adavis/gnucap/
|
|
Thu, 4 May 2006
|
[ 00:38 edwin ]
1.5 cad/alliance/Makefile
1.17 cad/astk-serveur/Makefile
1.6 cad/atlc/Makefile
1.22 cad/chipmunk/Makefile
1.5 cad/dxf2fig/Makefile
1.16 cad/electric/Makefile
1.23 cad/gerbv/Makefile
1.18 cad/gnucap/Makefile
1.20 cad/gtkwave/Makefile
1.20 cad/irsim/Makefile
(Only the first 10 of 88 ports in this commit are shown above. )
remove USE_REINPLACE for all ports with categories starting with C
|
|
Fri, 25 Feb 2005
|
[ 21:16 pav ]
1.17 cad/gnucap/Makefile
1.6 cad/gnucap/distinfo
- Update to 2005.01.27
- Unbreak on 5.3 and newer
PR: ports/78029
Submitted by: Johan van Selst <johans@stack.nl>
|
|
Mon, 16 Aug 2004
|
[ 03:33 kris ]
1.7 archivers/rvm/Makefile
1.12 audio/gsi/Makefile
1.16 cad/gnucap/Makefile
1.17 comms/gsmlib/Makefile
1.19 devel/astyle/Makefile
1.13 devel/clint/Makefile
1.18 devel/commoncpp/Makefile
1.2 devel/glrparser/Makefile
1.17 devel/korelib/Makefile
1.14 devel/xparam/Makefile
(Only the first 10 of 24 ports in this commit are shown above. )
BROKEN on 5.x: Does not compile with gcc 3.4.2
|
|
Wed, 14 Jul 2004
|
[ 13:19 krion ]
1.15 cad/gnucap/Makefile
1.3 cad/gnucap/pkg-descr
Update MASTER_SITES and WWW: line
PR: ports/68999
Submitted by: Ports Fury
|
|
Sun, 11 Jul 2004
|
[ 08:00 kris ]
1.14 cad/gnucap/Makefile
BROKEN: Unfetchable
|
|
Sat, 3 Jul 2004
|
[ 16:39 krion ]
1.13 cad/gnucap/Makefile
1.5 cad/gnucap/distinfo
1.2 cad/gnucap/pkg-descr
1.4 cad/gnucap/pkg-plist
Update to version 0.34
PR: ports/68629
Submitted by: Ports Fury
|
|
Wed, 4 Feb 2004
|
[ 05:21 marcus ]
1.29 accessibility/at-spi/Makefile
1.35 accessibility/atk/Makefile
1.7 accessibility/dasher/Makefile
1.26 accessibility/gail/Makefile
1.8 accessibility/gnomemag/Makefile
1.5 accessibility/gnomespeech/Makefile
1.6 accessibility/gnopernicus/Makefile
1.10 accessibility/gok/Makefile
1.7 accessibility/linux-atk/Makefile
1.2 arabic/katoob/Makefile
(Only the first 10 of 1588 ports in this commit are shown above. )
Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 2)
|
|
Wed, 7 May 2003
|
[ 03:12 ijliao ]
1.11 cad/gnucap/Makefile
1.3 cad/gnucap/distinfo
1.2 cad/gnucap/files/patch-src::xprobe.cc
1.3 cad/gnucap/pkg-plist
unbreak by upgrade to 0.33
PR: 51894
Submitted by: Ports Fury
|
|
Tue, 6 May 2003
|
[ 08:12 kris ]
1.10 cad/gnucap/Makefile
BROKEN: Does not build
|
|
Thu, 20 Feb 2003
|
[ 16:52 knu ]
1.14 cad/chipmunk/Makefile
1.2 cad/chipvault/Makefile
1.26 cad/felt/Makefile
1.9 cad/gerbv/Makefile
1.9 cad/gnucap/Makefile
1.17 cad/irsim/Makefile
1.17 cad/kaskade/Makefile
1.26 cad/magic/Makefile
1.25 cad/mars/Makefile
1.39 cad/pcb/Makefile
(Only the first 10 of 34 ports in this commit are shown above. )
De-pkg-comment.
|
|
Sun, 22 Dec 2002
|
[ 13:23 ijliao ]
1.8 cad/gnucap/Makefile
1.1 cad/gnucap/files/patch-src::xprobe.cc
fix build on -current
PR: 46462
Submitted by: Ports Fury
|
|
Mon, 8 Jul 2002
|
[ 11:14 ijliao ]
1.23 cad/felt/Makefile
1.5 cad/gnucap/Makefile
1.4 cad/gtkwave/Makefile
1.16 cad/qcad/Makefile
1.2 cad/slffea/Makefile
1.34 cad/xcircuit/Makefile
PERL -> REINPLACE_CMD
PR: 39273
Submitted by: Oliver Braun <obraun@informatik.unibw-muenchen.de>
|
|
Thu, 27 Jun 2002
|
[ 12:58 tg ]
1.4 cad/gnucap/Makefile
1.2 cad/gnucap/pkg-plist
Install docs and examples.
|
|
Wed, 12 Jun 2002
|
[ 16:53 pat ]
1.3 cad/gnucap/Makefile
1.2 cad/gnucap/distinfo
Update to 0.31
PR: ports/39162
Submitted by: Oliver Braun <obraun@informatik.unibw-muenchen.de>
|
|
Thu, 28 Feb 2002
|
[ 20:26 petef ]
unknown cad/gnucap/Makefile
Respect CXX/CXXFLAGS.
|
|
Thu, 7 Feb 2002
|
[ 07:07 ijliao ]
unknown cad/gnucap/Makefile
unknown cad/gnucap/distinfo
unknown cad/gnucap/pkg-comment
unknown cad/gnucap/pkg-descr
unknown cad/gnucap/pkg-plist
add gnucap 0.30 The Gnu Circuit Analysis Package
|
Number of commits found: 22 |
