linux-eagle5 5.11.0_1 cad =0

RESTRICTED: Usage permitted for non-commercial purposes only
NO CDROM: Sale for profit is not permitted
An easy to use, yet powerful tool for designing printed circuit boards
Maintained by: riggs@rrr.de
Port Added: 03 Aug 2009 09:45:35
Also Listed In: linux
License: not specified in port

---

---

The EAGLE Layout Editor is an easy to use, yet powerful tool for designing
printed circuit boards (PCBs). The name EAGLE is an acronym, which stands for
Easily Applicable Graphical Layout Editor.

The program consists of three main modules:

o Layout Editor
o Schematic Editor
o Autorouter

which are embedded in a single user interface. Therefore there is no need for
converting netlists between schematics and layouts.

This is a Light Freeware Edition. It has the following limitations:

o The useable board area is limited to 100 x 80 mm (4 x 3.2 inches).
o Only two signal layers can be used (Top and Bottom).
o The schematic editor can only create one sheet.
o Support is only available via email or through our forum (no fax or phone
  support).
o Use is limited to non-profit applications or evaluation purposes.

Apart from these limitations the EAGLE Light Edition can do anything the
Professional Edition can do. You can even load, view and print drawings that
exceed these limits!

WWW: http://www.cadsoftusa.com

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Run: emulators/linux_base-f10, textproc/linux-f10-expat, x11-fonts/linux-f10-fontconfig, graphics/linux-f10-jpeg, graphics/linux-f10-png, x11/linux-f10-xorg-libs
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/cad/linux-eagle5/ && make install clean

A package is not available for ports marked as: Forbidden / Broken / Ignore / Restricted

---

Configuration Options

     No options to configure

---

Master Sites:

ftp://ftp.cadsoft.de/eagle/program/5.11/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

- add missing dependencies
- bump portrevision

PR:             ports/160660
Submitted by:   4720@hushmail.com
Approved by:    Thomas Zander <riggs@rrr.de> (maintainer)
Approved by:    sahil (mentor)

- Update to 5.11

PR:             ports/156085
Submitted by:   Thomas Zander <thomas.e.zander@googlemail.com> (maintainer)

- Update cad/linux-eagle5 to 5.10 and transfer maintainership to submitter.
- Remove cad/linux-eagle (submitter is maintainer).
- Remove german/linux-eagle (submitter is maintainer).

PR:             151153
Submitted by:   Thomas Zander <thomas.e.zander@googlemail.com>
Approved by:    Michael Durian <durian@shadetreesoftware.com> (old maintainer)

Fix a few typos in ports/cad.

- Fix wrapped line

Here is a new linux-eagle5 port, the version is 5.5.

PR:             ports/133822
Submitted by:   Mike Durian <durian@shadetreesoftware.com>

Repocopy cad/linux-eagle -> cad/linux-eagle5 is completed.

PR:             ports/137155
Submitted by:   bsam (me)
Repocopied by:  portmgr (marcus)

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities