FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

non port: head/cad/qcad-partslib/Makefile
SVNWeb

Number of commits found: 18

Fri, 3 Jun 2016
[ 16:44 antoine ] Original commit   Revision:416324
416324 archivers/epkg/Makefile
416324 astro/qmapshack/Makefile
416324 audio/alac/Makefile
416324 audio/amp/Makefile
416324 audio/autozen/Makefile
416324 audio/hawkvoice/Makefile
416324 audio/mangler/Makefile
416324 audio/streamtuner/Makefile
416324 biology/platon/Makefile
416324 biology/seaview/Makefile

(Only the first 10 of 238 ports in this commit are shown above. View all ports for this commit)
Deprecate ports broken for more than 6 months
Sat, 12 Dec 2015
[ 21:36 bapt ] Original commit   Revision:403633
403633 cad/calculix/Makefile
403633 cad/jspice3/Makefile
403633 cad/qcad-partslib/Makefile
403633 comms/cdr_read/Makefile
403633 comms/dump1090_mr/Makefile
Mark as broken: unfetchable
Sat, 20 Jun 2015
[ 17:27 bapt ] Original commit   Revision:390172
390172 cad/qcad-partslib/Makefile
390172 cad/qcad-partslib/pkg-plist
Remove all @dirrm/@dirrmtry
Remove useless exec/unexec
Wed, 21 May 2014
[ 17:29 mr ] Original commit   Revision:354755
354755 cad/qcad-partslib/Makefile
Stagify
Fri, 20 Sep 2013
[ 15:58 bapt ] Original commit   Revision:327711
327711 cad/admesh/Makefile
327711 cad/adms/Makefile
327711 cad/alliance/Makefile
327711 cad/astk-client/Makefile
327711 cad/astk-serveur/Makefile
327711 cad/atlc/Makefile
327711 cad/basicdsp/Makefile
327711 cad/brlcad/Makefile
327711 cad/calculix/Makefile
327711 cad/cascade/Makefile

(Only the first 10 of 103 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)
Wed, 6 May 2009
[ 14:51 itetcu ] Original commit 
1.13 cad/qcad-partslib/Makefile
Don't fail if share/qcad can't be removed since it might be used by other ports

Submitted by:   mi@
Approved by:    mr@
Sun, 3 May 2009
[ 21:27 itetcu ] Original commit 
1.12 cad/qcad-partslib/Makefile
Really fix the plist.

Reported by:    QAT
[ 15:22 itetcu ] Original commit 
1.11 cad/qcad-partslib/Makefile
Fix plist.

Prompted by:    QAT
Sat, 2 May 2009
[ 08:27 mr ] Original commit 
1.10 cad/qcad-partslib/Makefile
1.4 cad/qcad-partslib/distinfo
1.54 cad/qcad/Makefile
The attached patches achieve the following improvements:

*  cad/qcad itself:
  1. Enable parallel build.
    This is safe, because the vendor's script supports it
    (but only, when one is using distcc).
  2. Remove the special handling for Alpha.
    I guess, this is a historical wart --
    the current version of qcad compiles on my amd64 with
    `-Wall -W' without any warnings. If Alpha bites again,
    the wart can be put back until someone tracks the bug down.

*  cad/qcad-partslib:
  1. Fetch the .tar.gz, rather than .zip variant of the distribution.
    This new file is more than twice smaller.
  2. Remove build-dependency on qcad -- this is useless for a pure-data port
    and only complicates package building and installation
    (a PORTREVISION bump in qcad itself, for example,
    will necessitate rebuilding partslib without any good reason).
  3. Don't create an intermediate extraction under ${WRKSRC}
    for the sole purpose of creating PLIST -- extract from ${DISTFILE} into
    ${DATADIR} directly and use tar's output to create PLIST on the fly.
    This saves a ton of I/O and diskspace during packaging.

Submitted by: Mikhail T. <mi+thun [at] aldan.algebra.com>
Sat, 19 Apr 2008
[ 17:56 miwi ] Original commit 
1.3 Mk/bsd.efl.mk
1.46 Mk/bsd.gnustep.mk
1.76 Mk/bsd.kde.mk
1.2 Mk/bsd.ocaml.mk
1.10 Mk/bsd.scons.mk
1.13 Mk/bsd.wx.mk
1.7 Mk/bsd.xorg.mk
1.64 accessibility/at-spi/Makefile
1.43 accessibility/dasher/Makefile
1.65 accessibility/gail/Makefile

(Only the first 10 of 2842 ports in this commit are shown above. View all ports for this commit)
- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)
Thu, 27 Mar 2008
[ 15:12 mr ] Original commit 
1.8 cad/qcad-partslib/Makefile
Load via ftp://
This should fix the reported download problems.

Submitted by:   V. Chukharev (at first)
Wed, 12 Mar 2008
[ 17:20 mr ] Original commit 
1.7 cad/qcad-partslib/Makefile
1.3 cad/qcad-partslib/distinfo
Update to 2.1.2.8
Sat, 19 May 2007
[ 20:32 flz ] Original commit 
1.1364 MOVED
1.566 Mk/bsd.port.mk
1.1 Mk/bsd.xorg.mk
1.1 Tools/scripts/mergebase.sh
1.502 UPDATING
1.2 accessibility/at-poke/Makefile
1.60 accessibility/at-spi/Makefile
1.29 accessibility/at-spi/pkg-plist
1.51 accessibility/atk/Makefile
1.27 accessibility/atk/pkg-plist

(Only the first 10 of 7868 ports in this commit are shown above. View all ports for this commit)
- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
Wed, 3 May 2006
[ 23:38 edwin ] Original commit 
1.5 cad/alliance/Makefile
1.17 cad/astk-serveur/Makefile
1.6 cad/atlc/Makefile
1.22 cad/chipmunk/Makefile
1.5 cad/dxf2fig/Makefile
1.16 cad/electric/Makefile
1.23 cad/gerbv/Makefile
1.18 cad/gnucap/Makefile
1.20 cad/gtkwave/Makefile
1.20 cad/irsim/Makefile

(Only the first 10 of 88 ports in this commit are shown above. View all ports for this commit)
remove USE_REINPLACE for all ports with categories starting with C
Sun, 27 Nov 2005
[ 09:37 mr ] Original commit 
1.4 cad/qcad-partslib/Makefile
fix pkg-plist
Wed, 23 Nov 2005
[ 16:55 mr ] Original commit 
1.3 cad/qcad-partslib/Makefile
1.2 cad/qcad-partslib/distinfo
fix pkg-plist
add sha265 checksum
Thu, 25 Nov 2004
[ 16:32 mr ] Original commit 
1.2 cad/qcad-partslib/Makefile
1.42 cad/qcad/Makefile
Since /usr/X11R6/... seems to be hardcoded in qcad
help first-time-users by using 'USE_X_PREFIX=yes'

PR:             ports/74118
Submitted by:   TAOKA Fumiyoshi <fmysh X iijmio-mail.jp>
Sun, 28 Mar 2004
[ 12:07 mr ] Original commit 
1.62 cad/Makefile
1.1 cad/qcad-partslib/Makefile
1.1 cad/qcad-partslib/distinfo
1.1 cad/qcad-partslib/pkg-descr
add qcad-partslib the parts-library for qcad.

Number of commits found: 18

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
apache24Dec 06
cryptoppDec 06
mod_http2-develDec 06
py-cryptography*Dec 06
qemu*Dec 06
qemu-devel*Dec 06
qemu-sbruno*Dec 06
chromiumDec 05
ImageMagickDec 04
ImageMagick-nox11Dec 04
ImageMagick7Dec 04
ImageMagick7Dec 04
ImageMagick7-nox11Dec 04
ImageMagick7-nox11Dec 04
py-pillowDec 04

35 vulnerabilities affecting 74 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 26960
Broken 313
Deprecated 176
Ignore 577
Forbidden 1
Restricted 214
No CDROM 82
Vulnerable 59
Expired 9
Set to expire 155
Interactive 0
new 24 hours 24
new 48 hours32
new 7 days79
new fortnight126
new month291

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.