FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
non port: head/cad/salome-gui/Makefile
SVNWeb

Number of commits found: 12

Mon, 6 Jan 2014
[ 12:21 rene ] Original commit 
338868 cad/salome-gui/Makefile
338868 cad/salome-jobmanager/Makefile
338868 cad/salome-light/Makefile
338868 cad/salome-med/Makefile
338868 cad/salome-multipr/Makefile
338868 cad/salome-netgenplugin/Makefile
338868 cad/salome-randomizer/Makefile
338868 cad/salome-sierpinsky/Makefile
338868 cad/salome-smesh/Makefile
338868 cad/salome-visu/Makefile

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Deprecate and schedule for removal on 2014-01-22, depends on expired
cad/salome-kernel.

PR:		ports/185111
Submitted by:	rene
Approved by:	maintainer timeout (devel@stasyan.com , 14 days)
Fri, 20 Sep 2013
[ 15:58 bapt ] Original commit 
327711 cad/admesh/Makefile
327711 cad/adms/Makefile
327711 cad/alliance/Makefile
327711 cad/astk-client/Makefile
327711 cad/astk-serveur/Makefile
327711 cad/atlc/Makefile
327711 cad/basicdsp/Makefile
327711 cad/brlcad/Makefile
327711 cad/calculix/Makefile
327711 cad/cascade/Makefile

(Only the first 10 of 103 ports in this commit are shown above. View all ports for this commit)
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)
Sun, 3 Feb 2013
[ 18:16 makc ] Original commit 
311476 audio/picard/Makefile
311476 audio/puddletag/Makefile
311476 cad/salome-geom/Makefile
311476 cad/salome-gui/Makefile
311476 cad/salome-jobmanager/Makefile
311476 cad/salome-light/Makefile
311476 cad/salome-med/Makefile
311476 cad/salome-multipr/Makefile
311476 cad/salome-netgenplugin/Makefile
311476 cad/salome-randomizer/Makefile

(Only the first 10 of 58 ports in this commit are shown above. View all ports for this commit)
Bump PORTREVISON after devel/py-sip and devel/qscintilla2 update.

x11-toolkits/py-qt:
- mark BROKEN: does not build with latest devel/py-sip
Sat, 29 Dec 2012
[ 17:53 thierry ] Original commit 
309623 cad/salome-gui/Makefile
309623 cad/salome-gui/files/patch-GUI_SalomePy.cxx
309623 cad/salome-gui/files/patch-GUI_VTKViewer_ArcBuilder.cxx
309623 cad/salome-gui/files/patch-GUI_adm_local_unix_config_files_py-compile
309623 cad/salome-gui/files/patch-GUI_make_common.starter.am
309623 cad/salome/Makefile
309623 cad/salome/Makefile.ext
- Chase Qt upgrade;

- Chase VTK upgrade;

- Unbreak.

Credit: most of these patches have been sent by Roger Mason
(rmason (at) mun.ca) to the maintainer.

PR:		ports/174065
Submitted by:	/me
Approved by:	maintainer
Wed, 28 Nov 2012
[ 19:15 thierry ] Original commit 
307929 cad/salome-gui/Makefile
Add one more month before removal: we are working on some patches and
hope to fix it (breakage due to VTK upgrade already fixed, the breakage
due to Qt's upgrade beeing investigated).

Feature safe:	yes
Fri, 25 May 2012
[ 01:50 makc ] Original commit 
1.34 audio/picard/Makefile
1.4 audio/puddletag/Makefile
1.5 cad/salome-geom/Makefile
1.7 cad/salome-gui/Makefile
1.3 cad/salome-jobmanager/Makefile
1.5 cad/salome-light/Makefile
1.6 cad/salome-med/Makefile
1.5 cad/salome-multipr/Makefile
1.3 cad/salome-netgenplugin/Makefile
1.4 cad/salome-randomizer/Makefile

(Only the first 10 of 57 ports in this commit are shown above. View all ports for this commit)
Chase PyQT update
Mon, 9 Apr 2012
[ 23:51 bapt ] Original commit 
1.3 audio/gstreamer-plugins-flite/Makefile
1.6 cad/salome-gui/Makefile
1.35 chinese/cxterm/Makefile
1.8 databases/hypertable/Makefile
1.6 databases/ocaml-pgocaml/Makefile
1.7 databases/pear-MDB2_Driver_ibase/Makefile
1.6 databases/pg_filedump/Makefile
1.14 databases/ruby-kyotocabinet/Makefile
1.70 databases/sqlrelay/Makefile
1.23 deskutils/doodle/Makefile

(Only the first 10 of 63 ports in this commit are shown above. View all ports for this commit)
Mark as deprecated and set expiration to 2012-05-10 for ports that are mark as
broken for more than 6 month
Sat, 24 Sep 2011
[ 20:12 pav ] Original commit 
1.5 cad/salome-gui/Makefile
- Mark BROKEN: does not compile
  ../.././../src/VTKViewer/VTKViewer.h:36:31: error: vtkSystemIncludes.h: No
such file or directory

Reported by:    pointyhat
Fri, 15 Jul 2011
[ 07:00 sunpoet ] Original commit 
1.4 cad/salome-geom/Makefile
1.4 cad/salome-gui/Makefile
1.2 cad/salome-jobmanager/Makefile
1.6 cad/salome-kernel/Makefile
1.4 cad/salome-light/Makefile
1.5 cad/salome-med/Makefile
1.4 cad/salome-multipr/Makefile
1.2 cad/salome-netgenplugin/Makefile
1.4 cad/salome-sierpinsky/Makefile
1.4 cad/salome-smesh/Makefile

(Only the first 10 of 26 ports in this commit are shown above. View all ports for this commit)
- Bump PORTREVISION for science/hdf5-18 shlib change
Tue, 4 Jan 2011
[ 21:13 thierry ] Original commit 
1.3 cad/salome-geom/Makefile
1.1 cad/salome-geom/files/patch-admlocal_unix_config_files_Makefile.am
1.2 cad/salome-geom/files/patch-admlocal_unix_configfiles_Makefile.am
1.2 cad/salome-geom/files/patch-build_configure
1.2 cad/salome-geom/files/patch-check_qt.m4
1.2 cad/salome-geom/files/patch-check_vtk.m4
1.3 cad/salome-geom/pkg-plist
1.3 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_DDS_DDS_DicGroup.cxx
1.1 cad/salome-gui/files/patch-GUI_DDS_DDS_DicItem.cxx

(Only the first 10 of 56 ports in this commit are shown above. View all ports for this commit)
Update cad/salome* to 5.1.4.

Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
         successful _run_.

PR:             ports/152396
Submitted by:   maintainer (Stas Timokhin)
Sat, 15 May 2010
[ 15:58 thierry ] Original commit 
1.2 cad/salome-geom/Makefile
1.1 cad/salome-geom/files/patch-Makefile.am
1.2 cad/salome-geom/pkg-plist
1.2 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_Makefile.am
1.2 cad/salome-gui/pkg-plist
1.3 cad/salome-kernel/Makefile
1.2 cad/salome-kernel/files/patch-KERNEL-Makefile.am
1.2 cad/salome-kernel/files/patch-KERNEL-SALOME_Comm_i.cxx
1.1 cad/salome-kernel/files/patch-KERNEL-bin_Makefile.am

(Only the first 10 of 43 ports in this commit are shown above. View all ports for this commit)
- Unbreak (incorrect use of bsd.autotools.mk)

- Don't install useless documentation.

PR:             ports/143878
Submitted by:   Stas Timokhin <devel (at) stasyan.com> (maintainer)
Fri, 12 Feb 2010
[ 22:14 pgollucci ] Original commit 
1.114 cad/Makefile
1.1 cad/salome-gui/Makefile
1.1 cad/salome-gui/files/patch-GUI_CASCatch_CatchSignals.cxx
1.1 cad/salome-gui/files/patch-GUI_LightApp_Driver.cxx
1.1 cad/salome-gui/files/patch-GUI_QxGraph_CanvasView.cxx
1.1 cad/salome-gui/files/patch-GUI_ResourceExporter.cxx
1.1 cad/salome-gui/files/patch-GUI_SUIT_ResourceMgr.cxx
1.1 cad/salome-gui/files/patch-GUI_VTKViewer_ConvexTool.cxx
1.1 cad/salome-gui/files/patch-GUI_bin_Makefile.am
1.1 cad/salome-gui/files/patch-GUI_check_GUI.m4

(Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains GUI module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>

Number of commits found: 12

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
chromiumAug 26
fileAug 21
py-djangoAug 21
py-django-develAug 21
py-django14Aug 21
py-django15Aug 21
php53Aug 18
phpmyadminAug 17
chromiumAug 13
serfAug 11
subversionAug 11
subversion17Aug 11
nginxAug 09
nginx-develAug 09
mingw32-opensslAug 06

6 vulnerabilities affecting 9 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24510
Broken 217
Deprecated 730
Ignore 561
Forbidden 36
Restricted 261
No CDROM 101
Vulnerable 23
Expired 0
Set to expire 720
Interactive 0
new 24 hours 6
new 48 hours8
new 7 days55
new fortnight95
new month255

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.