FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

I am looking for an LTO tape library. Do you have one to spare?
Port details
salome-kernel 5.1.4_3 cad Deleted on this many watch lists=0 search for ports that depend on this port
Broken BROKEN: Does not configure
Deprecated DEPRECATED: depends on expired cad/salome-kernel
Expired This port expired on: 2014-01-22
Ignore IGNORE: is marked as broken: Does not configure
KERNEL module of Salome platform
Was Maintained by: devel@stasyan.com search for ports maintained by this maintainer
Port Added: 12 Feb 2010 22:16:08
Also Listed In: science
License: not specified in port


SALOME is a free software that provides a generic platform for Pre 
and Post-Processing for numerical simulation. 
+Supports interoperability between CAD modeling and 
 computation software (CAD-CAE link) 
+Makes easier the integration of new components on heterogeneous systems 
 for numerical computation 
+Sets the priority to multi-physics coupling between computation software 
+Provides a generic user interface, user-friendly and efficient, 
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform 
+All functionalities are accessible through the programmatic 
 integrated Python console

This package contains meta-port.

WWW: http://www.salome-platform.org
SVNWeb : Main Web Site : Distfiles Availability : PortsMon
Master port: cad/salome

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.

Required To Build:
  1. devel/swig13
  2. devel/boost-python-libs
  3. lang/python27
  4. devel/gmake
  5. lang/gcc44
  6. devel/binutils
  7. devel/automake
  8. devel/autoconf
  9. devel/libtool
Required To Run:
  1. devel/boost-python-libs
  2. devel/py-omniorb
  3. devel/omniNotify
  4. lang/python27
  5. lang/gcc44
Required Libraries:
  1. science/hdf5-18
  2. textproc/libxml2
  3. devel/boost-all
  4. devel/omniORB
  5. x11-toolkits/tk86
NOTE: dependencies for deleted ports are notoriously suspect

This port is required by:

for Build for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

No installation instructions: this port has been deleted.

The package name of this deleted port was: salome-kernel


Configuration Options
===> The following configuration options are available for salome-kernel-5.1.4_3:
     GEOM=on: GEOM module
     LIGHT=on: LIGHT module
     MED=on: MED module
     MULTIPR=on: Multipr module
     NETGENPLUGIN=on: Netgen-meser plugin
     RANDOMIZER=on: Randomizer module
     SIERPINSKY=on: Sierpinsky module
     SMESH=on: SMESH module (require MED & GEOM)
     VISU=on: VISU module (require MED)
     YACS=on: Yacs module
===> Use 'make config' to modify these settings

Master Sites:
  1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/salome/
  2. http://www.stasyan.com/devel/distfiles/
Port Moves
  • port deleted on 2014-01-24
    REASON: Has expired: does not configure

Number of commits found: 12

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
24 Jan 2014 09:32:00
Original commit files touched by this commit  5.1.4_3
Revision:340885
rene search for other commits by this committer
Remove expired ports:
2013-12-22 devel/mico: Broken for more than 6 month
2014-01-22 cad/salome: depends on expired cad/salome-kernel
2014-01-22 cad/salome-netgenplugin: depends on expired cad/salome-kernel
2014-01-22 cad/salome-jobmanager: depends on expired cad/salome-kernel
2014-01-22 cad/salome-visu: depends on expired cad/salome-kernel
2014-01-22 cad/salome-kernel: does not configure
2014-01-22 cad/salome-multipr: depends on expired cad/salome-kernel
2014-01-22 cad/salome-smesh: depends on expired cad/salome-kernel
2014-01-22 cad/salome-gui: depends on expired cad/salome-kernel
2014-01-22 cad/salome-yacs: depends on expired cad/salome-kernel
2014-01-22 cad/salome-med: depends on expired cad/salome-kernel
2014-01-22 cad/salome-light: depends on expired cad/salome-kernel
2014-01-22 cad/salome-randomizer: depends on expired cad/salome-kernel
2014-01-22 cad/salome-sierpinsky: depends on expired cad/salome-kernel
2014-01-22 cad/salome-geom: depends on expired cad/salome-kernel
2014-01-22 devel/combat: depends on expired devel/mico
22 Nov 2013 08:24:11
Original commit files touched by this commit  5.1.4_3
Revision:334555
bapt search for other commits by this committer
Deprecated ports broken for more than 6 month
20 Sep 2013 15:58:42
Original commit files touched by this commit  5.1.4_3
Revision:327711
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
cad)
28 Jul 2013 20:46:52
Original commit files touched by this commit  5.1.4_3
Revision:323856
bapt search for other commits by this committer
Mark as broken: does not configure on any support version

Reported by:	pkg-fallout
11 May 2012 20:38:09
Original commit files touched by this commit  5.1.4_3
ade search for other commits by this committer
Update autoconf to 2.69 and automake to 1.12

PR:             166836
Tested by:      Multiple -exp runs (pav)
22 Oct 2011 23:50:23
Original commit files touched by this commit  5.1.4_3
eadler search for other commits by this committer
- remove maintainer tags from pkg-descr

Approved by:    portmgr
Approved by:    bapt (mentor)
15 Jul 2011 07:00:46
Original commit files touched by this commit  5.1.4_3
sunpoet search for other commits by this committer
- Bump PORTREVISION for science/hdf5-18 shlib change
26 Feb 2011 10:23:19
Original commit files touched by this commit  5.1.4_1
thierry search for other commits by this committer
Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.

As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.

PR:             ports/154736
04 Jan 2011 21:13:45
Original commit files touched by this commit  5.1.4
thierry search for other commits by this committer
Update cad/salome* to 5.1.4.

Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
         successful _run_.

PR:             ports/152396
Submitted by:   maintainer (Stas Timokhin)
15 May 2010 15:58:38
Original commit files touched by this commit  5.1.3_2
thierry search for other commits by this committer
- Unbreak (incorrect use of bsd.autotools.mk)

- Don't install useless documentation.

PR:             ports/143878
Submitted by:   Stas Timokhin <devel (at) stasyan.com> (maintainer)
05 Apr 2010 09:38:18
Original commit files touched by this commit  5.1.3_2
erwin search for other commits by this committer
Mark BROKEN: does not build
12 Feb 2010 22:14:42
Original commit files touched by this commit  5.1.3
  Sanity Test Failure
pgollucci search for other commits by this committer
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
 computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
 for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
 which helps to reduce the costs and  delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
 which has been based on this platform
+All functionalities are accessible through the programmatic
 integrated Python console

This package contains KERNEL module.

WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com

PR:             ports/143469
Submitted by:   Stas Timokhin <devel at stasyan.com>

Number of commits found: 12

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
firefoxJul 23
firefox-develJul 23
firefox-esrJul 23
firefox10Jul 23
firefox15Jul 23
firefox3Jul 23
firefox3-develJul 23
firefox35Jul 23
firefox36Jul 23
linux-firefoxJul 23
linux-thunderbirdJul 23
nssJul 23
thunderbirdJul 23
thunderbird-esrJul 23
thunderbird3Jul 23

8 vulnerabilities affecting 24 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds


Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24454
Broken 194
Deprecated 704
Ignore 528
Forbidden 16
Restricted 263
No CDROM 102
Vulnerable 27
Expired 21
Set to expire 691
Interactive 13
new 24 hours 2
new 48 hours4
new 7 days18
new fortnight49
new month107

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.