| non port: cad/salome-med/Makefile |
|
CVSWeb
|
Number of commits found: 6 |
|
Fri, 25 May 2012
|
[ 01:50 makc ] 
1.34 audio/picard/Makefile
1.4 audio/puddletag/Makefile
1.5 cad/salome-geom/Makefile
1.7 cad/salome-gui/Makefile
1.3 cad/salome-jobmanager/Makefile
1.5 cad/salome-light/Makefile
1.6 cad/salome-med/Makefile
1.5 cad/salome-multipr/Makefile
1.3 cad/salome-netgenplugin/Makefile
1.4 cad/salome-randomizer/Makefile
(Only the first 10 of 57 ports in this commit are shown above.  )
Chase PyQT update
|
|
Fri, 15 Jul 2011
|
[ 07:00 sunpoet ]
1.4 cad/salome-geom/Makefile
1.4 cad/salome-gui/Makefile
1.2 cad/salome-jobmanager/Makefile
1.6 cad/salome-kernel/Makefile
1.4 cad/salome-light/Makefile
1.5 cad/salome-med/Makefile
1.4 cad/salome-multipr/Makefile
1.2 cad/salome-netgenplugin/Makefile
1.4 cad/salome-sierpinsky/Makefile
1.4 cad/salome-smesh/Makefile
(Only the first 10 of 26 ports in this commit are shown above. )
- Bump PORTREVISION for science/hdf5-18 shlib change
|
|
Sat, 26 Feb 2011
|
[ 10:23 thierry ]
1.5 cad/salome-kernel/Makefile
1.4 cad/salome-med/Makefile
1.82 french/aster/Makefile
1.38 french/med/Makefile
1.11 science/ecs/Makefile
1.10 science/fvm/Makefile
1.12 cad/salome/Makefile.ext
1.5 science/ecs/distinfo
Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.
As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.
PR: ports/154736
|
|
Tue, 4 Jan 2011
|
[ 21:13 thierry ]
1.3 cad/salome-geom/Makefile
1.3 cad/salome-gui/Makefile
1.4 cad/salome-kernel/Makefile
1.3 cad/salome-light/Makefile
1.3 cad/salome-med/Makefile
1.3 cad/salome-multipr/Makefile
1.3 cad/salome-randomizer/Makefile
1.3 cad/salome-sierpinsky/Makefile
1.3 cad/salome-smesh/Makefile
1.3 cad/salome-visu/Makefile
(Only the first 10 of 56 ports in this commit are shown above. )
Update cad/salome* to 5.1.4.
Warning: This port require gcc 4.4 build 20090512 or _EARLIER_ for
successful _run_.
PR: ports/152396
Submitted by: maintainer (Stas Timokhin)
|
|
Sat, 15 May 2010
|
[ 15:58 thierry ]
1.2 cad/salome-geom/Makefile
1.2 cad/salome-gui/Makefile
1.3 cad/salome-kernel/Makefile
1.2 cad/salome-light/Makefile
1.2 cad/salome-med/Makefile
1.2 cad/salome-multipr/Makefile
1.2 cad/salome-randomizer/Makefile
1.2 cad/salome-sierpinsky/Makefile
1.2 cad/salome-smesh/Makefile
1.2 cad/salome-visu/Makefile
(Only the first 10 of 43 ports in this commit are shown above. )
- Unbreak (incorrect use of bsd.autotools.mk)
- Don't install useless documentation.
PR: ports/143878
Submitted by: Stas Timokhin <devel (at) stasyan.com> (maintainer)
|
|
Fri, 12 Feb 2010
|
[ 22:15 pgollucci ]
1.117 cad/Makefile
1.1 cad/salome-med/Makefile
1.1 cad/salome-med/files/patch-MEDSPLITTER_SCOTCHGraph.cxx
1.1 cad/salome-med/files/patch-MED_MEDMEM_define.hxx
1.1 cad/salome-med/files/patch-MED_MED_Common.hxx
1.1 cad/salome-med/files/patch-MED_MEDunvCr.cxx
1.1 cad/salome-med/files/patch-MED_V2_2_Wrapper.cxx
1.1 cad/salome-med/files/patch-MED_check_Med2.m4
1.1 cad/salome-med/files/patch-MED_check_metis.m4
1.1 cad/salome-med/files/patch-MED_check_scotch.m4
(Only the first 10 of 32 ports in this commit are shown above. )
SALOME is a free software that provides a generic platform for Pre
and Post-Processing for numerical simulation.
+Supports interoperability between CAD modeling and
computation software (CAD-CAE link)
+Makes easier the integration of new components on heterogeneous systems
for numerical computation
+Sets the priority to multi-physics coupling between computation software
+Provides a generic user interface, user-friendly and efficient,
which helps to reduce the costs and delays of carrying out the studies
+Reduces training time to the specific time for learning the software solution
which has been based on this platform
+All functionalities are accessible through the programmatic
integrated Python console
This package contains MED module.
WWW: http://www.salome-platform.org
- Stas Timokhin
devel@stasyan.com
PR: ports/143469
Submitted by: Stas Timokhin <devel at stasyan.com>
|
Number of commits found: 6 |
