Number of commits found: 119 (showing only 100 on this page)

1 | 2  »  

Upgrade to 2.7.6.1.

Upgrade to 2.7.5.

Feature safe:   yes

Upgrade to 2.7.4.

1: Upgrade to 2.7.3
2: take maintainer bit.

1: Upgrade to 2.7.2.
2: better way to handle intcode-module.so.

- Fix pkg-plist

Upgrade to 2.7.1.

Fix typo

- Install missing man pages
- Bump PORTREVISION

- Update to 2.7.0
- Add CHEWING knob to enable Chewing IM module
- Limit to compile on FreeBSD 7.0+
- Fix japanese/anthy dependency
- Many thanks to the contributer: vanilla@
- Drop maintainership

Changelog:      http://www.csie.nctu.edu.tw/~cp76/gcin/download/Changelog.html

- Get rid FreeBSD 6.X support

- Update to 1.6.0
- Take maintainership

Changelog:      http://www.csie.nctu.edu.tw/~cp76/gcin/download/Changelog.html

- Update to 1.5.9
- Fix mirror issue, also mv LOCAL/chinsan to LOCAL/chinsan/gcin for better
category.

- update to 1.5.8
- remove noseeing
- fix gcin-setup
- fix qt4 detecting problem (path)
- remove unused patch
- use 'xdg-open(1)' to opens a file or URL in the user's preferred application

 - Upgrade to 1.5.6
 - Add LICENSE

- Correct Latest link (I'm pretty sure no one is going to do 'pkg_add -r yes`)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Fix QT4 option usage (in preparation for Qt-4.6.0 update)
Replace strip with ${STRIP_CMD} while here

Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.

Hat:            portmgr

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 1.4.5

Fix plist with -DNOPORT*.

Prompted by:    QAT QA run
Approved by:    maintainer timeout on QATMail

- Reduce depenency on japanese/anthy
- Bump PORTREVISION

Suggested by:   kevlo@
Source from:    caleb

- Mark BROKEN on FreeBSD 6.x

Reported by:    pointyhat

- Update to 1.4.4

- Update noseeing to version 12th.
- Bump PORTREVISION

- Add conflicts with chinese/gcin-devel

- Update to 1.4.2.

- Update to 1.4.1.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Fix the pkg-plist if defined(NOPORTDOCS).

Noticed by:             itetcu

- Update to 1.4.0.

- Update noseeing to ver. 11.

- Update noseeing to 10.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update noseeing to 9.
- Add more mirrors.

- Update to 1.3.9
- Changelog: http://cle.linux.org.tw/gcin/download/Changelog

- Update to 1.3.8
- Changelog: http://cle.linux.org.tw/gcin/download/Changelog

- Update to 1.3.7.1

- Update to 1.3.5

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 1.3.4

PR:             ports/111504
Submitted by:   chinsan (maintainer)

- Fix problem with GTK_IM_MODULE set to gcin [1]
- Make pkg-message more clear [2]

PR:             ports/108821 [1], ports/108791 [2]
Submitted by:   eliu (author) via chinsan [1], chinsan (maintainer) [2]

- Update BOSHIAMY to version 8

PR:             ports/108703
Submitted by:   chinsan (maintainer)

- Update to 1.3.3

PR:             ports/108604
Submitted by:   chinsan (maintainer)

- Update boshiamy to 7

PR:             ports/107647
Submitted by:   chinsan (maintainer)

- Update to 1.3.2

PR:             ports/107461
Submitted by:   chinsan (maintainer)

- fix word order in gcin2tab

PR:             ports/106262
Submitted by:   chinsan (maintainer)

- Update to 1.3.1

PR:             ports/106248
Submitted by:   chinsan (maintainer)

- Respect X11BASE

PR:             ports/105955 [1], ports/105957 [2]
Submitted by:   rafan [1], chinsan [2] (maintainer)
Approved by:    chinsan (maintainer)

- Update to 1.2.8
- Decrease the dependence
 (Suggested by: vanilla via irc)

PR:             ports/104570, ports/104531
Submitted by:   chinsan
Approved by:    delphij (mentor)

- Fix pkg-plist and some issue, bump version

PR:             ports/104724
Submitted by:   chinsan
Noticed by:     kris
Approved by:    portmgr (erwin)
                delphij (mentor)

- Unbreak chinese/gcin by adding more MASTER_SITES

PR:             ports/104570
Submitted by:   chinsan
Approved by:    portmgr (erwin)
                delphij (mentor)

BROKEN: Unfetchable

Approved by:    portmgr (self)

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

- Update to 1.2.7

PR:             ports/104115
Submitted by:   maintainer (chinsan)

- Fix syntax error while replace bash as sh
  Detailed disscuss at:
 
http://cle.linux.org.tw/gcin/readcomment.php?comment_id=397&comment_current_page=99999#comment
- bump PORTREVISION

PR:             ports/104037
Submitted by:   maintainer (chinsan)

Change the following ports to my FreeBSD.org email.
Approved by:    delphij (mentor)

archivers/pecl-bz2/Makefile
archivers/pecl-lzf/Makefile
archivers/pecl-rar/Makefile
audio/fapg/Makefile
audio/pecl-id3/Makefile
chinese/CJKUnifonts/Makefile
chinese/auto-tw-l10n/Makefile
chinese/dfsongsd/Makefile
chinese/fortunetw/Makefile
chinese/gcin/Makefile
chinese/joe/Makefile
chinese/joe2/Makefile

(Only the first 15 lines of the commit message are shown above )

- Update to 1.2.6

PR:             ports/103678
Submitted by:   chinsan <chinsan.tw at gmail.com> (maintainer)

- Update to 1.2.5

PR:             ports/103052
Submitted by:   maintainer <chinsan dot tw_AT_gmail dot com>

- Update to 1.2.4

PR:             ports/102898
Submitted by:   chinsan <chinsan.tw at gmail.com> (maintainer)

- Update to 1.2.3

PR:             ports/102823
Submitted by:   chinsan <chinsan.tw at gmail.com> (maintainer)

- USE_LDCONFIG

PR:             ports/102378
Submitted by:   chinsan <chinsan.tw(at)gmail.com> (maintainer)
Approved by:    krion (mentor)

- Remove IGNOREFILES to pet portlint(1)
- Due to different implementation of qsort(3) in glibc and FreeBSD,
  it causes problem in gcin2tab.c. Use mergesort(3) to avoid this problem. [1]

PR:             ports/102208
Submitted by:   chinsan <chinsan.tw at gmail.com> (maintainer),
                Edward Lee via maintainer [1]

- Update to 1.2.2

PR:             ports/102169
Submitted by:   maintainer <chinsan dot tw_AT_gmail dot com>

- Update to 1.2.1

PR:             ports/100192
Submitted by:   maintainer (chinsan)

Update to 1.2.0

PR:             ports/97052
Submitted by:   chinsan <chinsan.tw@gmail.com> (maintainer)
Approved by:    lawrance (mentor)

- Update to 1.1.9
- submitter will maintain this port

PR:             ports/96695
Submitted by:   chinsan

Upgrade to 1.1.8.

PR:             ports/95354
Submitted by:   chinsan.tw@gmail.dot.com

Upgrade to 1.1.7

PR:             ports/93704
Submitted by:   chinsan.tw@gmail.at.com

Upgrade to 1.1.6.

PR:             ports/92685
Submitted by:   chinsan

- Update to 1.1.5
- Add additional categories: textproc gnome

PR:             91787
Submitted by:   chinsan <chinsan.tw@gmail.com>

Upgrade to 1.1.4.

PR:             ports/90379
Submitted by:   maintainer

Upgrade to 1.1.3

PR:             ports/89364
Submitted by:   chisan.tw at gmail dot com

Upgrade to 1.1.2.

PR:             ports/88663
Submitted by:   chinsan.tw gmail com

Bump PORTREVISION to chase the glib20 shared library update.

- upgrade to 1.1.1
- remove old patch
- add new patch(gcin2tab)

PR:             88310
Submitted by:   chinsan <chinsan dot tw AT gmail dot com>

Upgrade to 1.0.9:

 files/patch-im-client_gcin-im-client.c:
  Without this, connecting to gcin daemon via unix domain socket (which is
  gcin's preferred method) NEVER works. Not sure how it works on Linux, I'd
  like to discuss this with gcin author. Unknown to me at this time.

 files/patch-win0.c:
  On its discussion forum, people said 1.0.9 needs this otherwise the build
  won't work.

Upgrade to 1.0.8.

PR:             ports/86558
Submitted by:   chinsan at gmail.com

Upgrade to 1.0.7.

PR:             ports/86373
Submitted by:   chinsan

Upgrade to 1.0.4.

PR:             ports/84803
Submitted by:   chinsan at gmail dot com

Reset bouncing maintainer address.  These ports are now available for
adoption.

Note that I have left the maintainer's own ftp site as a MASTERSITE
because it still appears to be active (for now, anyways).

Hat:    portmgr

1: fix pkg-plist
2: fix WITH_ logical.

Notified by:    kris@

Upgrade to 1.0.1

PR:             ports/83310
Submitted by:   chinsan
Approved by:    maintainer

Upgrade to 1.0.0.

PR:             ports/82692
Submitted by:   chinsan
Approved by:    maintainer

Minor install change + fix plist to match
Bump PORTREVISION

PR:             ports/82606
Submitted by:   chinsan <chinsan.tw@gmail.com>
Approved by:    statue@netlab.cse.yzu.edu.tw (maintainer)

Upgrade to 0.9.9, fix coredump under gcin with tsin input method

PR:             ports/82559
Submitted by:   chinsan

Upgrade to 0.9.8.

PR:             ports/82541
Submitted by:   chinsan
Approved by:    maintainer

Upgrade to 0.9.7.

PR:             ports/82201
Submitted by:   chisan
Reviewed by:    maintainer

- add support for Boshiamy input method
  The Boshiamy .cin & .gtab table is port from Edward Lee
  and I make it as an option for gcin poeple.
  Therefore, there's a new extra patch file(extra-patch-data-Makefile)
  and I put "PLIST_FILES+=  share/gcin/table/noseeing.gtab" into
  "if defined(WITH_BOSHIAMY)" section in Makefile
  to suit the pkg-plist which people choose Boshiamy.
- option NOPORTDOCS has incorrect package list
- remove unused patch (patch-about.c)

PR:             ports/81246
Submitted by:   chinsan <chinsan@mail2000.comdottw>
Approved by:    maintainer

Upgrade to 0.9.5.

PR:             ports/80923
Submitted by:   chinsan <chinsan@mail2000.com.tw>
Approved by:    maintainer

Fix typo error.

Submitted by:   thierry@

Upgrade to 0.9.3.

PR:             ports/80651
Submitted by:   chinsan <chinsan.at.mail2000.com.tw>
Approved by:    maintainer

- fix setpgrp bug
- update to 0.9.2

PR:             ports/80398
Submitted by:   chinsan <chinsan_at_mail2000.com.tw>
Approved by:    maintainer

1: upgrade to 0..1.
2: fix distinfo.

Submitted by:   chinsan <chinsan@mail2000.com.tw>
Approved by:    maintainer

Upgrade to 0.9.0.

Submitted by:   chinsan <chinsan_at_mail2000.com.tw>
Approved by:    maintainer

- Update to 0.8.9

PR:             ports/78996
Submitted by:   Chin-San Huang <chinsan@mail2000.com.tw>
Approved by:    statue <statue@netlab.cse.yzu.edu.tw> (maintainer)

s/setgrp/setpgrp/,
bump version.

Submitted by:   chinsan <chinsan@mail2000.com.tw>
Approved by:    maintainer

Upgrade to 0.8.8.

Approved by:    maintainer

Number of commits found: 119 (showing only 100 on this page)

1 | 2  »  

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities