oxim 1.2.2_3 chinese =2

Open X Input Method server
Maintained by: clsung@FreeBSD.org
Port Added: 29 Mar 2006 15:33:06
Also Listed In: textproc
License: not specified in port

---

---

oxim is a common input method server, which focuses mainly on Chinese.
It is mainly developed by Firefly <firefly@ossii.com.tw>, and is a
fork from xcin 2.5.3 (pre-release version). In addition to the
original Root and OverTheSpot input style inherited from xcin, it
also supports OnTheSpot and OnTheSpotQT. You can easily use oxim in
GTK and QT based software.

WWW: http://opendesktop.org.tw/

CVSWeb : Sources : Main Web Site : Distfiles Availability : PortsMon

---

NOTE: FreshPorts displays only required dependencies information. Optional dependencies are not covered.
Required To Build: chinese/libchewing, x11/libX11, x11-fonts/libXft, x11/libXpm, x11/libXtst, textproc/intltool, devel/pkg-config
Required To Run: chinese/fireflyttf, chinese/libchewing, x11/libX11, x11-fonts/libXft, x11/libXpm, x11/libXtst, devel/pkg-config, devel/gio-fam-backend
Required Libraries: converters/libiconv, devel/gettext, accessibility/atk, devel/glib20, x11-toolkits/gtk20, x11-toolkits/pango
There are no ports dependent upon this port

---

To install the port: cd /usr/ports/chinese/oxim/ && make install clean
To add the package: pkg_add -r zh-oxim

---

Configuration Options

===> The following configuration options are available for zh-oxim-1.2.2_3:
     GTK2=On (default) "Enable GTK2 input method module"
     CHEWING=On (default) "Enable Chewing input module"
     UNICODE=On (default) "Enable Unicode input module"
===> Use 'make config' to modify these settings

---

Master Sites:

ftp://ftp.opendesktop.org.tw/odp/OXIM/Source/

ftp://140.111.128.66/odp/OXIM/Source/

ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Get Rid MD5 support

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Remove unusable mirror sites
- Pass maintainership to clsung@ as I don't use it anymore and he agreed
  to take over

- Explicitly disable setup-tool. The configure requires additional patch
  (fixed in later version).

- Update to 1.2.2 which is compatible with libchewing >= 0.3.2
- oxim-setup is now removed

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Correct plist

Reported by:    pointyhat

Fix USE_XORG for the upcoming bsd.port.mk changes (ports/122340).

Approved by:    portmgr (self)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Switch to USE_XORG

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Update to 1.1.6

- Update to 1.1.5

- Update to 1.1.4.1

- Update to 1.1.4

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

- Update to 1.1.3
- Remove 4.x bits

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Add local distfiles mirror until next release.

- Update to 1.1.2.90

- Update to 1.1.2
- Remove QTDIR in CONFIGURE_ENV. Now it's set by bsd.kde.mk.

- Optional GNOME dependencies should use WANT_GNOME=yes before
  bsd.port.pre.mk.

- Chase recent chinese/fireflyttf changes

Reported by:    pointyhat via kris

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

- Enable GUI Setup Tool
  It does not depend on qinputcontextplugin.h, so we can build it.
- Bump PORTREVISION

- Update to 1.1.1

- Update to 1.1.0
  As noted in Makefile, I disabled Qt module and GUI setup tool due
  to oxim uses some files that only exist in Debian package.
- Add few mirrors and correct the path

- Respect TARGETDIR
- Utilize USE_LDCONFIG

PR:             ports/101884
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

Change to my FreeBSD.org email.

Approved by:    delphij (mentor)

- bump PORTREVISION (also fix BROKEN)
- After chinese/libchewing updated to 0.3.0, which is API/ABI incompatible
  with older releases 0.2.x, oxim can not build with libchewing 0.3.0.

  This is addressed in the added patch. Thanks clsung@ for initial patch
  and testing. If there are any problems with this patch, please contact
  the maintainer, instead of the author of oxim.

- 2 OPTIONS added to enable/disable Chewing/Unicode input module. Leave
  them as default on since they are default on in package.

PR:             ports/97561
Submitted by:   maintainer (Rong-En Fan)

BROKEN: Does not compile

This port uses lots of C99 syntax. Instead of patching,
require newer gcc to build it.

Tested on RELENG_4 in tinderbox:
http://www.rafan.org/tb/logs/4-FreeBSD/zh-oxim-1.0.3.log

PR:             96486
Submitted by:   maintainer (Rong-En Fan)

- Update to 1.0.3,
  * fixes a crash when the tray icon is clicked without input context
- Add another mirror site, this should be enough

PR:             96342
Submitted by:   maintainer (Rong-En Fan)

Upgrade to 1.0.2.

PR:             ports/96163
Submitted by:   maintainer

Add oxim 1.0.1, open X Input Method server.

PR:             ports/94956
Submitted by:   Rong-En Fan <rafan@infor.org>

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities