Number of commits found: 56

Overhaul the port before I attempt to make it more usable on modern FreeBSD:

- Switch to official "previous version distfile + patch" scheme instead of
  using our apparently hand-rolled distfile; it is also in line with what
  most GNU/Linux folks do
- Remove superfluous assignment of PKGMESSAGE, it's done automagically
- Cleanup sed(1) expressions in REINPLACE_CMDs, prefer contextual addresses
  to hardcoded line numbers, remove useless global modifiers, etc.
- Pad pkg-message text display in post-install with blank lines to bring port
  behavior in line with that of package
- Utilize OPTIONS, define LICENSE (GPLv2), adjust COMMENT
- Remove unneeded patches, add a patch which brings manpage fixes
- Install extra documentation
- Generally cleanup Makefile while I am here

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Fix config file path

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Reset chinsan@FreeBSD.org due to numerous maintainer-timeouts and no
response to email.

Hat:            portmgr

- Switch SourceForge ports to the new File Release System: categories starting
with B,C

- Update to 0.2.6

- set PORTSCOUT variable

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

- Respect LOCALBASE

PR:             ports/113385
Submitted by:   tdb
Approved by:    chinsan (maintainer)

Change the following ports to my FreeBSD.org email.
Approved by:    delphij (mentor)

archivers/pecl-bz2/Makefile
archivers/pecl-lzf/Makefile
archivers/pecl-rar/Makefile
audio/fapg/Makefile
audio/pecl-id3/Makefile
chinese/CJKUnifonts/Makefile
chinese/auto-tw-l10n/Makefile
chinese/dfsongsd/Makefile
chinese/fortunetw/Makefile
chinese/gcin/Makefile
chinese/joe/Makefile
chinese/joe2/Makefile

(Only the first 15 lines of the commit message are shown above )

- Respect DESTDIR

PR:             101905
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>
Approved by:    maintainer (chinsan dot tw@gmail dot com)

- Fix input error on some Big5 range
- Summitted by Edward G.J. Lee <edt1023@info.sayya.org> Thanks.

PR:             ports/100545
Submitted by:   maintainer

Fix build.

PR:             ports/98781
Submitted by:   maintainer
Approved by:    lawrance (mentor, implicit)

- Update to 0.2.5

PR:             ports/98754
Submitted by:   maintainer (chinsan)

- Fix doc bug
- Make portlint more happy

PR:             ports/98125
Submitted by:   maintainer (chinsan)

- Fix run error on 5.X/6.X
- Take maintainership

PR:             ports/96786
Submitted by:   chinsan

- fix libintl dependency and unbreak this port

BROKEN when WITHOUT_NLS: Does not compile without gettext

Reset bouncing maintainer address.  These ports are now available for
adoption.

Note that I have left the maintainer's own ftp site as a MASTERSITE
because it still appears to be active (for now, anyways).

Hat:    portmgr

1: rename /dev/vga to /dev/ttyv0.
2: bump version.

PR:             ports/80494
Submitted by:   maintainer

Oops, we want to twiddle the effective-user-ID, not the real-user-ID,
since we need to recover credentials.  Relative to the previous commit,
s/setuid/seteuid/g.

Reminded by:    a hot shower

The set-user-ID binary zhcon normally reads it's user-specified
configuration file as root.  Drop privileges before opening the file to
prevent a local user from reading arbitrary files.

Reported by:    Erik Sjölund
Obtained from:  Debian

- Pass maintainership to submitter

PR:             ports/75730
Submitted by:   statue(at)freebsd.netlab.cse.yzu.edu.tw

- wrap USE_GETTEXT by adding "if !defined(WITHOUT_NLS)"
- use system libintl instead of included one

set localedir to PREFIX/share/locale to be synchronized with PLIST

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

statue@freebsd.sinica.edu.tw has asked for all the maintained
ports to be reset to ports@FreeBSD.org.  We're sorry to see you
go and want to thank you for your help in the past.

PR:             ports/59515
Submitted by:   statue@freebsd.sinica.edu.tw

Fix incorrect use of ${REINPLACE_CMD}.

Approved by:    portmgr (kkenn)

remove USE_XLIB

PR:             58978
Submitted by:   Statue <statue@freebsd.sinica.edu.tw>

Before committing the previous BROKEN changes I carefully checked the status
of each port on bento and for recent fixes.  Unfortunately at some point I
got confused and switched to the wrong list :-)  As a result I picked up a
number of ports that were fixed a while ago.  Sorry for the false alarm,
maintainers.

Pointy hat to:  kris

Correct whitespace in previous

BROKEN on 5.x: does not compile

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

update to zhcon-0.2.3

PR:             51625
Submitted by:   Statue <statue@freebsd.sinica.edu.tw>

De-pkg-comment.

only support i386

PR:             46450
Submitted by:   maintainer

1: Upgrade to 0.2.1.
2: Fix build on -current.
3: Fix hangs on -current.

PR:             ports/45797
Submitted by:   maintainer
Approved by:    kris

PERL -> REINPLACE
And some ports have USE_PERL5=yes now.

Chase shlib rev of devel/gettext

Submitted by:   lots and lots
Pointy hat to:  ade

1) Fix pkg-plist.
2) Correct path of zhcon.cfg in zhcon(1).

PR:             ports/37315
Submitted by:   Statue <statue@softwareliberty.org> (MAINTAINER)

gettext upgrade uber-patch (stage 3)

- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
  with a "-old" suffix -- gettext-old will have its deorbit burn
  sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order

Reviewed by:    portmgr

support HAVE_GGI_LIB
bump port revision

PR:             36921
Submitted by:   maintainer

o Convert po from utf-8 to big5.
o Handle LC_* properly.
o Bump PORTREVISION.

PR:     ports/35728
Submitted by:   Yen-Ming Lee <leeym@utopia.leeym.com>

Stage 1 of gettext update.

Move gettext (0.10.35) with gettext-old
Update gettext from gettext-devel (0.10.40)
Remove gettext-devel
Fix dependencies

Stage 2 will involve upgraded gettext to 0.11 and fixing issues
Stage 3 involves a de-orbit burn sequence for gettext-old

Reviewed by:    portmgr

o Update zhcon to version 0.2.   o Add zh_TW.Big5 po messages.   o Remove big5
IME extra-patches and merge it into standard FreeBSD patches.    

Update big5-ime's version.    

update patch for Big5 IME support    

Use `::' operator for pre-everything target.    

o Add Big5 IME support.   o Bump PORTREVISION.    

Bump PORTREVISION. Non-root users will be happy to run zhcon now.    

New port: zhcon    

Number of commits found: 56

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities