Convert ports to use the options helpers in categories [abc]*, and minor fixes.

Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3412?

Update to 3.22.13, fix portlint warnings.

This release adds the FSQ modem.

Fix the following two portline warnings:
WARN: Makefile: [25]: the options to USES are not sorted.  Please consider
sorting them.
WARN: Makefile: you should only use ".if ${PORT_OPTIONS:MDOCS}" to wrap
installation of files into /usr/local/share/doc if the collection of files
is large and it takes considerable time to copy.

Update to 3.22.10

Maintenance/bugfix release.

Update portaudio to v19/Remove portaudio2 [1]
Chase portaudio change
Add patches from debian for games/cultivation
Add patches from upsteam for audio/rezound
Mark py-fastaudio as broken

Approved by:	maintainer

Get portaudio2 dependencies right since libs are not in ${LOCALBASE}/lib
Clean up LOCAL slightly

Add patch to fix OSS support (bump PORTREVISION)
Switch to Options-NG.
Use makepatch for patchs.

PR:		200039
Submitted by:	takefu@airport.fm

Update to latest version.

Note, fldigi-shell has been removed upstream.

2 ports categories: Remove $PTHREAD_LIBS

Categories: net-p2p, comms

Note that qrq was not properly staged, it failed stage-QA.
aprsd failed check-plist; it had a plist orphan.  Now it fails stage-QA
with a fs violation, but it may be acceptable.  Fixes added to both.

approved by:	PTHREAD blanket

Update to 3.22.05

- Remove unnecessary patches.
- Fix space placement errors in:
    files/patch-src_thor_thor.cxx
    files/patch-src_xmlrpcpp_XmlRpcServer.cpp

Update to 3.22.04

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Update to 3.22.02
Fix default options for OSS and FLARQ
Add Dutch translation
Fix various portlint nits

Interesting changes in this release:
  * Added information macro tags
    <ANTENNA> - my antenna
    <BAND> - current operating band
  * modified rtty and psk viewers to eliminate modem specific
    code in the UI elements
  * restricted psk multichannel viewer to modes
    - PSK31, PSK63, PSK63F and PSK125
    - QPSK31, QPSK63 and QPSK125
  * Fixed RTTY decoder for baud rate > 110
EmComm 8PSK modes:
  * Reverted 8PSK-1000
    - 1000 baud, 3kbps (no FEC)
  * Modified 8PSK-1200
    - Now uses 1/2 rate K=7 FEC
    - 1200 baud, 1.8kbps
  * Added mode 8PSK-1333
    - 1333 baud, 4kbps (no FEC)

Fix build on >= 10.0 by including required headers

- Update to latest 3.22.01
- Many updates added new modems, new macros, UI and bug fixes
- See http://www.w1hkj.com/downloads/fldigi/fldigi_changes.txt

Cleanup plist

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Add OPTIONS_DEFINE=DOCS for ports with %%PORTDOCS%% in the plist.

Where possible, correct a few instances where PORTDOCS was being used
to flag stuff in EXAMPLESDIR. For some ports, mostly those owned by
ruby@, PORTDOCS is applied to pretty much everything whether it's
documentation or example.

Fix hashmap macro test to compile with Clang

Reviewed by:    db, skreuzer
Approved by:    db, skreuzer (mentors)
MFH:            2014Q3
Differential Revision:  https://phabric.freebsd.org/D362

- update to 3.21.83 Maintenance release
- fix LIB_DEPENDS to use new libFOO.so form hidden in OPTIONS
- change to hamradio@ for MAINTAINER
- use shebang fix

- Missed a few in plist

Submitted by:	swills

- Update to latest release

=Version 3.21.81=

2014-03-26  David Freese  <w1hkj@w1hkj.com>

        134221e: TX monitor
        922c16f: Spotter seg fault
        dbe4181: Audio selectors for PORTAUDIO
        9771f4b: M4 tr1 detect
        03643a6: ttyACMxx identification
        cfe6f87: Olivia critical section
        a60d6f7: MT63 critical section
        c97043c: Logbook fields
        3bc4f31: Hamlib selector
        d33b7e7: Combobox
        6f71f12: RTTY macro
        ac671da: clang compatibility

Chase boost and icu bump
While here convert some LIB_DEPENDS

- convert from old USE_ to USES

- Correct a mis-use of USES=

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in comms

- Fix build on 10.x
- Add STAGEDIR support

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [bce])

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
comms)

- pointyhat myself. I forgot to remove the diffs for the files
  upstream has adopted patches for.
- Noted by Tom KH6ILT (Sorry!)

Submitted by:	Thomas Laus <lausts@acm.org>

- Update to 3.21.72
- Tons of fixes to GUI
- Many additional macros added

Convert USE_GETTEXT -> USES=gettext

While here:
- Trim headers
- Remove some useless pre.mk/post.mk
- Convert to optionsng

Convert all c categories to USE=pkgconfig

- Fix build docbook-xsl is needed along with asciidoc + xsltproc
- upgrade to fldigi-3.21.68 small fixes including RTTY filters
- log2 is now in libm no need to kludge it

Approved by:	portmgr (miwi)

- trim header
- change to new options framework for docs
- change default tty to ttyu from ttyd
- fix warning with retval while here
- fix build on FreeBSD-10
- clean up tiny warning in xml code

Maintenance upgrade to 3.21.59

- Thumbdrive
  discover application executable location
  if the directory in which "fldigi" / "fldigi.exe" resides contains a
  file named NBEMS.DIR then base all NBEMS file locations to that drive-folder
  this allows a fully portble NBEMS installation to a thumbdrive (or other
  portable drive)
- UTF-8 overhaul
  Includes
  Refactor get_tx_char()
  Reset to stock version, call byte_at().

Feature safe:	yes

convert libcddb and libsamplerate to only build depend on pkgconf, track
dependency impact

- Update to latest 3.21.50 / Flarq 4.3.3
- Fix asciidocs use, man pages need asciidocs
- Many changes to UI, Modem, Macros and Internationalisation

- Convert to optionsng
- Remove NLS from options use correct WITHOUT_NLS

- update png to 1.5.10

- update to 3.21.41 and use fltk 1.3 [1]
- clean up using portlint

= Fldigi 3.21 release notes =

== Modems ==

  * Weather Fax receive and transmit
  * RSID can be configured to open the decoder squelch
  * Added several new RSID modem codes
  * Video ID improvements
  * Added browser support for the PSK63F and PSK-nnn-R types
  * Improved CW prosign handling
  * Improved signal detection in PSK multiple decoder
  * The MT-63 modem can now receive and transmit on any frequency

- Unbreak build
- See http://www.w1hkj.com/Fldigi.html many fixes and enhancements to macro
  system, internationalisation, UI and modems

Feature safe:   Yes

- Get rid FreeBSD 6.X support

- Mark BROKEN: does not compile with new fltk

Reported by:    pointyhat

- Reworked to use OPTIONS framework [1]
- Fixed port to generate man pages which needs asciidoc and xsltproc
- minor changes to observe PORTDOCS

- From release NOTES
= Fldigi 3.21 release notes =

== Modems ==

  * Weather Fax receive and transmit
  * RSID can be configured to open the decoder squelch
  * Added several new RSID modem codes
  * Video ID improvements
  * Added browser support for the PSK63F and PSK-nnn-R types
  * Improved CW prosign handling

- Update to Version 3.21.10
* Replaced es.po with newer translation
* Updated es.po, fr.po and it.po to correctly identify
  strings changed by e000ac157e7a96b
* Corrected misspelled words in tool tip
* Removed duplicate defines in src/dialogs/fl_digi.cxx
* GNU/Hurd build fix

- Update to 3.21.8
- Contestia mode added, macro improvements, language translations,
  about window changes
- See http://www.w1hkj.com/Fldigi.html for details

- Update to 3.12.5
- package now includes flarq (fast light automatic repeat request)
  is a file transfer application.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- fix build for png-1.4.1

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Fix previous commit (redefinition of LIB_DEPENDS)

Reported by:    QAT

- Chase x11-toolkits/fltk update

- update to jpeg-8

- Fix build on -6

Notified by:    erwin (via pointyhat)

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update boost to 1.39
- Split boost port to separate components, with boost-all metaport

PR:             ports/137054
Submitted by:   Alexander Churanov <churanov.port.maintainer@gmail.com>
(maintainer)

- Fix mtree

Reported by:    QAT
Approved by:    portmgr

- Update to 3.11
- Upstream has accepted diffs.

- Update to 3.10

- Update to 3.03

- Use BUILD_DEPENDS to ensure the port has fltk-threads not fltk.
- USE_GCC 4.2+ as portlint suggests for 6.x builds.

- Update to 3.01
- Remove newly added dos lf's from vendor
- fix sizeof(void *) != sizeof(int) botch

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Remove duplicates from MAKE_ENV after inclusion of CC and CXX in default
MAKE_ENV

- Update to 2.10.3

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- update to fldigi 2.10
  this version adds views of multiple psk sessions

- Update to 2.09
- This version adds multiple psk decode, watch more than one QSO

Mark as broken on sparc64: fails to install.

- update to 2.08

- Update to 2.03 version of fldigi
- Vendor has made many bug fixes and improvements too many to list here,
  see http://www.w1hkj.com/Fldigi.html or ChangeLog in distribution.

- update to 1.342
- 1.342 includes bug fixes for memory leaks
- vendor has improved support for FreeBSD so several patches can go.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- update to latest release

Approved by: ehaupt (mentor)

- update to latest fldigi since old version is gone
- add MASTER_SITE since upstream has a strange release cycle

Notified by: kris (via pointyhat)
Approved by: ehaupt (mentor)

Change my MAINTAINER: line in Makfile to db@FreeBSD.org
fix simple typo in xwota Makefile while at it.

Approved by:    ehaupt (mentor)

Add fldigi 1.11, a digital decoder for psk, cw, psk31, olivia.

Submitted by:   Diane Bruce <db at db.net>