Number of commits found: 44

Add knob (default off) to install comms/uartlirc serial LIRC driver.

- Further improvements to the devinput repeat behaviour, now xbmc should
  work a little better.
- Include updated lircd.conf.devinput in example lircd.conf, with one
  missing button added. (KEY_IMAGES)
- Bump PORTREVISION.

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Update devinput repeat hack to improve af9015 tuner remote behaviour.
- Bump PORTREVISION.

- Some doc (pkg-message..) updates after the webcamd update that now
  supports /dev/input/eventX.
- Bump PORTREVISION.

- Update to 0.9.0 .
- Add devinput driver (/dev/input/eventX, -H devinput) in preparation
  for upcoming webcamd update that will support it.
- Fix build with clang, and a few bugs it found too.

- Add patch to fix MAKE_JOBS_SAFE and mark as such.
- No PORTREVISION bump as the installed bits don't change.

- Chase libftdi update
- Bump PORTREVISION
- Remove MD5 checksum

- Add an example lircd.conf that's preconfigured for use with
  webcamd, either with USB DVB tuner remotes supported by the Linux
  drivers by default that webcamd uses, or for remotes supplied with
  MCE USB IR receivers.
- Bump PORTREVISION.

- Adjust pkg-message after remote support has been committed to the
  webcamd port.
- Bump PORTREVISION.

- Update comms/lirc to 0.9.0p1_4 in order to be able to use the lirc
  support in webcamd svn (for mceusb-based receivers/transmitters and
  USB DVB tuner remotes supported by the Linux code), and enable
  support for a few more USB devices while we're at it tho of those
  only an FTDI-based one was tested:

        http://www.huitsing.nl/irftdi/ [1]

- Fix plist for audio/rhythmbox and multimedia/totem and
  add missing LIRC_{CFLAGS,LIBS} variables to CONFIGURE_ENV for
  multimedia/xine when building them with (optional) lirc support. [2]

- Chase liblirc_client shlib version bump for ports depdending on it
  and bump PORTREVISIONs for ports depending on it by default.

Approved by:    portmgr (miwi) [2]
Thanks to:      Warren Block <wblock@wonkity.com> for testing [1]

Sync to new bsd.autotools.mk

- Switch SourceForge ports to the new File Release System: categories starting
with B,C

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Remove conditional checks relevant only on FreeBSD 5.x and older

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Add support for DVICO USB remote control.

Submitted by:   grog
Approved by:    Daniel O'Connor (maintainer)

Use libtool port instead of included version to avoid objformat a.out botch

- Update to 0.8.0
- Hack configure so produced daemon binary is ready to use
  with third party kernel drivers.
- Make libirman support optional.
- Move daemon communication sockets under /var/run/lirc.
- Add startup script.
- Use bzip2.
- Minor cleanups.

Approved by:    maintaner

Don't offer irman as an option.  It's required to build the port.

Submitted by:   Daniel O'Connor (maintainer)

- portlint(1)

PR:             95766
Submitted by:   Alexander Botero-Lowry <alex___foxybanana.com>
Approved by:    maintainer timeout (14 days)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Back out previous commit, the pkg-plist may have been fixed already.

BROKEN: Incorrect pkg-plist

Fix INDEX build, and correct broken dependency.

Reported by:    kris' make index script
Approved by:    portmgr hat

* Daniel O'Connor <doconnor@gsoft.com.au> has agreed to take over
  maintainership as I don't actively use this port anymore.

* Patch for vga on i386.

PR:     ports/87832

* Update to 0.7.2.

PR:      ports/86528
Submitted by:   Daniel J. O'Connor <darius@dons.net.au>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Set the device directory to /var/lirc and check for libirman in the correct
location.

Submitted by:   Lewis Thompson <purple@lewiz.net>
PR:             ports/75190

Add capability to build with libirman support.

Suggested and tested by:        dennis@rootxs.nl

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Fix plist & unmark broken.

BROKEN: Broken pkg-plist

Respect CFLAGS; utilize USE_GETOPT_LONG; utilize USE_LIBTOOL.

PR:             ports/59842
Submitted by:   Ports Fury
Approved by:    maintainer timeout (6 weeks)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Add USE_XLIB to the ports Makefile

Noticed by: bento

New port: comms/lirc: Linux Infared Remote Control

        This is a port of the LIRC, Linux Infrared Remote Control,
        package (www.lirc.org). This port installs the daemons and
        tools for interacting with device drivers that support the
        LIRC device interface. The port does not install any FreeBSD
        infrared device drivers yet; the user must obtain these
        from third parties or port the existing Linux drivers.

PR:             ports/46774
Submitted by:   Mike Heffner <mikeh@FreeBSD.org> <mheffner@acm.vt.edu>

Number of commits found: 44

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities