19:52 tijl 

Remove libintl.so.9 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

18:34 tijl 

net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD

databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip

databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample

databases/libgdamm:
- Drop :keepla
- USES=tar:bzip2
- Use INSTALL_TARGET=install-strip

databases/libgdamm5:
- Add INSTALL_TARGET=install-strip
- Drop --enable-static (inherited from old repocopy)

devel/anjuta x11-toolkits/py-gnome-extras:
- Drop :keepla

dns/powerdns dns/powerdns-devel:
- Convert to USES=libtool
- Add INSTALL_TARGET=install-strip
- Disable static modules
- Stop creating library symlinks with .0 suffix, not needed for dynamically
  opened modules

mail/dovecot2:
- Add USES=libtool

mail/dovecot2-pigeonhole:
- Drop CONFIGURE_TARGET (incorrect for Dragonfly)
- Add USES=libtool and INSTALL_TARGET=install-strip

math/gnumeric:
- USES=libtool tar:xz

Approved by:	portmgr (implicit, bump unstaged ports)

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

08:41 kwm 

Stagify.
switch to USES=gmake libtool pathfix.
use USE_GNOME=glibmm

 

18:08 bapt 

In preparation for making libtool generate libraries with a sane name, fix all
LIB_DEPENDS in databases

 

11:05 bapt 

Revert removal of libgdamm it is still in used by databases/glom
Rename the package -legacy to fix collision with libgdamm5

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

22:11 bapt 

Add an explicit dependency on pkgconf

 

05:26 dinoex 

- update png to 1.5.10

07:34 ade 

Sync to new bsd.autotools.mk

15:37 kwm 

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
Bapt <baptiste.daroussin@gmail.com>
jsa@
miwi@
Sergio de Almeida Lenzi <lenzi.sergio@gmail.com>
Maxim Samsonov <xors@mne.ru>
Kris Moore

And pav@ for 2 exp-runs

PR:             ports/152255
                ports/143260
                ports/141033
                ports/149629
                ports/150350
                ports/151523
With hat:       gnome@

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

20:06 marcus 

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Other major improvements include an updated HAL with better volume
probing code, ufsid integration, and support for volume names containing
spaces (big thanks to J.R. Oldroyd); a new WebKit; updated AbiWord;
an updated Gimp; and a preview of the new GNOME Shell project (thanks to
Pawel Worach).

The FreeBSD GNOME Team would like to that the following additional
contributors to this release whose patches and testing really helped
make it a success:

Andrius Morkunas
Dominique Goncalves
Eric L. Chen
J.R. Oldroyd
Joseph S. Atkinson
Li
Pawel Worach
Romain Tartière
Thomas Vogt
Yasuda Keisuke
Rui Paulo
Martin Wilke
(and an extra shout out to miwi and pav for pointyhat runs)

We would like to send this release out to Alexander Loginov (avl) in
hopes that he feels better soon.

PR:             136676
                136967
                138872 (obsolete with new epiphany-webkit)
                139160
                134737
                139941
                140097
                140838
                140929

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

12:52 kwm 

Update to 3.99.16.

23:55 kwm 

Update to 3.99.15.

Update COMMENT and pkg-descr to mention this library doesn't wrap libgda v3
anymore but libgda v4.

05:56 marcus 

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

01:36 araujo 

- Use GNOME macro instead of ${MASTER_SITE_GNOME}, remove
  MASTER_SITE_SUBDIR when possible.

PR:             ports/125243
Submitted by:   pgollucci
Reworked by:    myself
Tested on:      pointyhat exp-run (pav)

22:56 kwm 

Update to 3.0.1.

14:34 pav 

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

13:17 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

04:25 marcus 

Update to 3.0.0.

Submitted by:   kwm

04:39 bland 

Allow these ports to be built with GCC 4.2.

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

06:05 kris 

Use libtool15 port instead of included version to avoid objformat a.out botch

08:54 marcus 

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

07:37 marcus 

Update to 1.3.7.

Approved by:    bland

02:20 bland 

- Plug .la file to plist. [1]
- Remove obsolete USE_REINPLACE.

Reported by:    krismail [1]

23:26 marcus 

This port is no longer broken now that libgda2-1.2.x is back.

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:02 ade 

Switch to <target>:: convention for both patch-autotools and run-autotools,
to allow for easier overriding of these targets by port Makefiles, if
they need to.

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

05:37 marcus 

Update to 1.3.6.

05:41 bland 

Fix build failure triggered by pkgconfig update.

13:50 bland 

Update to 1.3.6

10:54 marcus 

Bump PORTREVISION to chase the glib20 shared lib version change.

22:37 marcus 

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

03:31 marcus 

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

00:55 bland 

One more typo fix in libgdamm-2.0.pc

05:34 bland 

Fix libgda dependency in installed .pc file.

14:57 bland 

Add libgdamm 1.3.0, C++ wrapper for libgda2 library.