19:37 Rene Ladan (rene) 

cleanup: Remove expired ports:

2022-06-30 databases/percona56-server: EOL since February 2021
2022-06-30 databases/percona56-client: EOL since February 2021
2022-06-30 databases/mysql55-server: Upstream support ended on December 2018
2022-06-30 databases/mysql55-client: Upstream support ended on December 2018

    6fcb730

22:03 Florian Smeets (flo) 

databases/percona56-*: Deprecate ports

    b76ca12

06:49 Loïc Bartoletti (lbartoletti) 

databases/percona*: fix pkg-plist use share/man

Approved by:	portmgr (blanket)

    bc8d417

15:15 Stefan Eßer (se) 

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port
cannot conflict with itself (due to logic in bsd.port.mk that
supresses the pattern match result in that case).

A few ports that set the conflicts variables depending on complex
conditions (e.g. port options), have been left unmodified, despite
probably containing outdated package names.

These changes should only affect the installation of locally built
ports, not the package building with poudriere. They should give an
early indication of the install conflict in cases where currently
the pkg command aborts an installation when it detects that an
existing file would be overwritten,

Approved by:	portmgr (implicit)

    bcaf25a

21:40 Stefan Eßer (se) 

*/*: Remove redundant '-*' from CONFLICTS definitions

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

    04b9da4

21:23 Rene Ladan (rene) 

cleanup: drop support for EOL FreeBSD 11.X

Search criteria used:
- 11.4
- OSREL*
- OSVER*
- *_FreeBSD_11

Input from:
- adridg: devel/qca-legacy
- jbeich: _WITH_DPRINTF, _WITH_GETLINE, GNU bfd workarounds
- sunpoet: security/p5-*OpenSSL*

Reviewed by:	doceng, kde, multimedia, perl, python, ruby, rust
Differential Revision: https://reviews.freebsd.org/D32008
Test Plan: make index

    620968a

11:22 Florian Smeets (flo) 

Update databases/percona56-* to 5.6.51-91.0

    63c4ad4

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

21:32 flo 

Update to 5.6.49.89.0 and fix build on head.

 

10:34 bapt 

Drop the ipv6 virtual category for d* category as it is not relevant anymore

 

19:02 flo 

Update to 5.6.45-86.1

MFH:		2019Q3
Security:	198e6220-ac8b-11e9-a1c7-b499baebfeaf

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

10:11 flo 

Update to 5.6.44-86.0

 

20:03 pi 

databases/percona56-server: update 5.6.43-84.2 -> 5.6.43-84.3

- Fixes several CVEs, see
  https://vuxml.FreeBSD.org/freebsd/d3d02d3a-2242-11e9-b95c-b499baebfeaf.htm
  for the list

PR:		235930
Submitted by:	j@avt0gen.ru
Approved by:	flo (maintainer timeout)
MFH:		2019Q3

 

21:46 flo 

Update to 5.6.42-84.2

PR:		234826
Submitted by:	Andres Montalban <amontalban@gmail.com>
MFH:		2019Q1
Security:	ec5072b0-d43a-11e8-a6d2-b499baebfeaf

 

20:25 tcberner 

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

 

08:39 linimon 

Add USES=compiler:c++11-lang to fix compilation on GCC-based
architectures.  In particular, this fixes the build on powerpc64.

PR:		234071
Submitted by:	Piotr Kubaj
Approved by:	portmgr (tier-2 blanket)

 

18:12 bapt 

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

 

20:13 flo 

Update to 5.6.41-84.1

 

19:51 flo 

Fix rc scripts after r328331 in head.

PR:		227234, 227235
Submitted by:	0mp

 

18:22 flo 

- add license
- fix build with clang 6.0

 

22:15 flo 

Update to 5.6.39-83.1

PR:		226067
Submitted by:	Thomas Babut

 

20:21 flo 

Update to 5.6.38-83.0

PR:		221972
MFH:		2017Q4
Security:	https://vuxml.freebsd.org/freebsd/c41bedfd-b3f9-11e7-ac58-b499baebfeaf.html

 

00:42 linimon 

Mark more ports broken that fail on both armv6 and armv7.

Approved by:	portmgr (tier-2 blanket)

 

05:37 vd 

MySQL ports: Extend CONFLICTS_INSTALL in conflicting ports.

databases/mysqlwsrep56-server has been present for some time and
databases/mysqlwsrep57-server has been added recently. Both ports
conflict with other MySQL server ports and this has been reflected
in databases/mysqlwsrep5[67]-server/Makefile but must also be
reflected in all conflicting ports' Makefiles as well.

The conflicting ports are:
databases/mariadb100-server
databases/mariadb101-server
databases/mariadb102-server
databases/mariadb55-server
databases/mysql55-server
databases/mysql56-server
databases/mysql57-server
databases/mysql80-server
databases/percona55-server
databases/percona56-server
databases/percona57-server

There is not going to be mysqlwsrep*-client* ports (because the vanilla
mysql*-client* ports suffice), so the entry in CONFLICTS just reads
mysqlwsrep*.

PR:		220791
Submitted by:	vd
Approved by:	brnrd, ale (maintainer timeout), feld (maintainer timeout), flo,
mmokhi, koobs

 

19:14 flo 

Update to 5.6.36-82.0

PR:		219631
Submitted by:	Thomas Babut

 

13:58 feld 

databases/percona55-server percona56-server:

Fix OPENSSL option to actually enable linking with OpenSSL

MFH:		2017Q3
Differential Revision:	https://reviews.freebsd.org/D9122

 

21:07 tcberner 

Make ninja opt-out in cmake.mk

Using ninja instead of make (1) can lead to significant speed ups while
building.
Therefore switch from having the ninja generator opt-in to having it opt-out.

Previously cmake-ports that wanted to use ninja could set
    CMAKE_NINJA=yes
now, ports that do not work with ninja can set
    cmake:<existing args>,noninja
Note, that needing this should be an exception and most often points to a broken
cmake of the port.

The ports using cmake were modified
* removed USES=gmake, if ninja is used
* removed MAKE_ARGS, if ninja is used
* added the cmake-argument noninja if necessary

PR:		219629
PR:		213331
Exp-run by:	antoine
Reviewed by:	rakuco
Differential Revision:	https://reviews.freebsd.org/D10748

 

13:21 linimon 

Mark some ports failing on power64.  In cases where the error message
was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)
Reported by:	swills

 

07:04 linimon 

Provide more descriptive error messages for ports failing on powerpc64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

 

15:11 bapt 

Update libedit to 20170329

 

21:33 flo 

Update to 5.6.35-80.0

PR:		215245
Submitted by:	Thomas Babut <tbabut@mobileobjects.de>

 

13:16 amdmi3 

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL

Approved by:	portmgr blanket

 

20:07 feld 

databases/percona-pam-for-mysql: Fix build

The build was failing on 11 and head due to missing USES=libedit

PR:		213643

 

15:28 feld 

Add new port databases/percona-pam-for-mysql

Percona PAM authentication plugin for MySQL.

WWW: https://www.percona.com/

Differential Revision:	https://reviews.freebsd.org/D8193

 

19:52 flo 

Update to 5.6.33-79.0

 

13:40 flo 

Update to 5.6.32-78.0

PR:		212169
Submitted by:	Thomas Babut

 

09:13 flo 

- Update to 5.6.31-77.0 [1]
- fix TOKUDB option

PR:		209785 [1]
Submitted by:	Thomas Babut

 

11:51 flo 

- update to 5.6.29-76.2
- add TOKUDB option
- various Makefile tweaks suggested by mat

PR:		206394, 208060
Submitted by:	pservit@gmail.com
Reviewed by:	mat
Sponsored by:	Essen Linuxhotel Hackathon 2016
Differential Revision:	D5602

 

16:43 swills 

many ports: mark broken on powerpc64

 

17:35 flo 

Update to 5.6.27-75.0

PR:		204327
Submitted by:	Thomas Babut <tbabut@mobileobjects.de>

 

23:17 flo 

Update to 5.6.26.74.0

PR:		203148
Submitted by:	Thomas Babut <tbabut@mobileobjects.de>

 

21:01 rakuco 

percona56-client: Switch to USES=libedit.

Instead of manually adding both a build- and a run-time dependency on
libedit from ports, use USES=libedit instead. Not only does it take care of
adding the proper dependency, but it also sets CMAKE_PREFIX_PATH to
${LOCALBASE} to make sure that the version in ports is preferred instead of
the one in base.

This is a dependency for moving to CMake 3.3.x, as starting with 3.3.0 calls
to find_library() will also look in the $PATH environment variable and end
up finding libedit from base by default.

Approved by:	flo (maintainer)
Differential Revision:	https://reviews.freebsd.org/D3468

 

11:29 flo 

Merge r389659 by antoine.

  Unbreak on head: instead of using headers from base libedit and
  linking against readline, use libedit from ports
  Note: this may need a bit more patching during next libedit port update

  Reported by:	pkg-fallout

 

20:57 flo 

- Update to 5.6.24-72.2
- Add missing perl5 to USES, Percona Server needs perl [1]

PR:		199402 [1]
Reported by:	Claus Conrad <lists@clausconrad.com>

 

22:38 flo 

Update to 5.6.22-72.0
Fix build on arm [1]

PR:		197550 [1]
Submitted by:	mikael.urankar@gmail.com [1]
Tested by:	sbruno [1]

 

23:37 flo 

Update to 5.6.22-71.0

MFH:		2015Q1

 

11:28 flo 

Update to 5.6.21-70.1
Update CONFLICTS [1]

PR:		194821 [1]
Submitted by:	Bernard Spil <spil.oss@gmail.com> [1]

 

12:27 flo 

- Update to 5.6.19-67.0
- add new option, on by default, to enable InnoDB memcached plugin [1]

PR:		191647 [1]
Submitted by:	dlundgren@syberisle.net

 

12:22 bapt 

Fix build with readline from ports

 

18:06 flo 

Update to 5.6.17-66.0

 

20:17 flo 

- Update to 5.6.16-64.1
- Also pass --defaults-extra-file to mysql_install_db [1]

Submitted by:	Daniel Ylitalo <daniel@203core.se>

 

00:25 flo 

Don't use the LATEST link. This fixes the issue that these ports became
unfetchable after every upstream update.

 

20:02 flo 

Update to 5.6.15-rel63.0

 

19:40 flo 

- update to 5.6.14.r62.0
- support stage

 

21:41 flo 

- update to 5.6.13-rel61.0
- merge r329781 to fix build with clang on i386

 

13:41 flo 

- merge r329470 by decke from mysql56 (head build fix)
- merge r329549 by marino from mysql56 (use shebangfix)

 

23:18 flo 

- use unique package names
- stop using LATEST_LINK
- update CONFLICTS accordingly

Approved by:	maintainer

 

20:49 flo 

Update to 5.6.13-rc60.6

 

16:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
databases)

 

21:47 flo 

Update to 5.6.13-rc60.5

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

19:24 flo 

Update to 5.6.12-rc60.4

 

15:05 flo 

Update to 5.6.11-rc60.3

 

20:06 makc 

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

 

21:23 flo 

Fix merge mistakes.

 

21:18 flo 

Add the 5.6 branch of Percona-Server.

While MySQL 5.6.10 is considered GA, Percona still considers Percona-Server
5.6.10 alpha software.