Number of commits found: 38

- update to jpeg-8

Remove a leftover directory.

Reported  by:   pointyhat via pav

Fix the packaging now that the pidgin API is not required to build the
pidgin plug-in.

Reported by:    QAT

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

(Only the first 15 lines of the commit message are shown above )

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Update to 1.1.5.

Fix plist.

Submitted by:   QA Tindy

Presenting GNOME 2.26.1 for FreeBSD.

Approved by:    portmgr (marcus)

Bump PORTREVISION's after OpenLDAP update.

Suggested by:   rafan

Update to 1.0.1.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 0.14.0

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Chase the libpurple update.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Remove the optional Gaim support now that net-im/gaim has been removed.

Reported by:    edwin

Make the Gaim dependency optional as Gaim is now deprecated.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Add USE_GETTEXT.

Found by:       portlint (cports.sh)

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

(Only the first 15 lines of the commit message are shown above )

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Move instant messaging related ports to newly created net-im category:

  net/gaim -> net-im/gaim
  net/gaim-latex -> net-im/gaim-latex
  net/gaim-openq -> net-im/gaim-openq
  net/gaim-rss-reader -> net-im/gaim-rss-reader
  net/gicq -> net-im/gicq
  net/gnomeicu2 -> net-im/gnomeicu2
  net/gossip -> net-im/gossip
  net/ickle -> net-im/ickle
  net/jabber -> net-im/jabber
  net/jabber-aim -> net-im/jabber-aim
  net/jabber-conference -> net-im/jabber-conference
  net/jabber-jud -> net-im/jabber-jud
  net/jabber-msn -> net-im/jabber-msn

(Only the first 15 lines of the commit message are shown above )

- Remove RUN_DEPENDS=${BUILD_DEPENDS} so we don't depend on gmake/libtool
  etc.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 0.4.

Chase the Gaim 1.5.0 update.

Update to Gaim 1.4.0.  See http://gaim.sourceforge.net/ChangeLog for
the list of changes.  Also, bump all PORTREVISIONs for ports that depend on
Gaim.

Update Gaim to 1.3.1 and chase all dependent ports.

The changes in this release of Gaim can be found at
http://gaim.sourceforge.net/ChangeLog.

Submitted by:   Matthew Luckie <mjl@luckie.org.nz>
Security:       This release fixes security bugs found at
                http://gaim.sourceforge.net/security/

Chase the Gaim 1.3.0 update.

Bump PORTREVISION to chase the glib20 shared lib version change.

- Update to 0.3

- Fix pkg-plist by using gnomehack [1]
- Bump PORTREVISION

Reported by:    pointyhat [1]

Bump PORTREVISION to chase the gtkhtml3 shared library version.

Add nautilus-sendto

This application provide integration between nautilus , evolution , and gaim.

- Nautilus context menu component ("Send To...") .
- A dialog for insert the email acount or IM account which you want to
   send the file/files .
   o Contact with evolution-data-server and get the email accounts .
   o Contact with gaim (nautilus gaim plugin) and get the IM acccounts
   o You can send files packaged in varios formats
- Plugin Support for gaim

Number of commits found: 38

2 vulnerabilities affecting 8 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities