A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 65

Change the neon dependency to use neon28 to be compatible with
subversion-freebsd.

Requested by:   rnoland on #freebsd-gnome

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 2.4.2.

Rename www/neon to www/neon26 to make the integration
of www/neon28 possible

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Update to 2.4.1.

Add a missing dependency on gtksourceview2.

Reported by:    pointyhat via pav

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Update to 2.2.3.

Update to 2.2.2.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Update to 2.2.1.

Fix a really stupid mistake on my part, and correct a crash when opening
files over NFS.

PR:             115969
Submitted by:   Oleg Sharoiko <os@rsu.ru>

Don't perform sed replacements on a non-existent file.

PR:             115439
Submitted by:   Volker Werth <volker@vwsoft.com>

Convert port to the new autotools world order.

Submitted by:   ade

Clean up the share/icons/gnome/48x48/mimetypes directory since this is not
owned by gnome-icon-theme.

Reported by:    pointyhat via pav

Fix GNOME mime type icon installation.

Reported by:    pointyhat via pav

Allow portupgrade to build anjuta.  Anjuta uses $PKG_PATH as the path to
pkg-config.  Portupgrade is nice enough to set $PKG_PATH to
/usr/ports/packages/All which causes all sorts of fun errors.

Fix tag creation script so it uses the correct datadir.

Update to 2.2.0.  See http://sourceforge.net/forum/forum.php?forum_id=709731
for all of the things changed in this release.  This is a huge change
from the previous stable 1.2.x version.

NOTE:  While I did test quite a few runtime features, anjuta still seems
a bit buggy.  For best results, stick with the scintilla editor.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Remove devel/pcre-utf8 and enable UTF8 support in devel/pcre by
default.

Bump PORTREVISION on all dependent ports.

Use libtool15 port instead of included version to avoid objformat a.out botch

Switch libtool dependency from gnu-libtool to libtool15.

portlint:
        -Use DOCSDIR in plist.
        -Use lowercase letter in the begin of IGNORE.

Add USE_GETTEXT to appease portlint.

Remove USE_REINPLACE from all categories starting with D

Switch the pcre dependency to pcre-utf8 to fix conflicts with other GNOME
apps.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Fix a crash triggered by GTK+ 2.8.9.

Obtained from:  http://bugzilla.gnome.org/show_bug.cgi?id=323918

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Mark IGNORE on 4.X since it uses symbols not available in older versions
of FreeBSD.

Reported by:    pointyhat via kris

Use the newer versions of GCC to build anjuta.

Reported by:    pointyhat via kris

Update to 1.2.4, and use the official version of GNU getline() from gsed.

Bump PORTREVISION to chase the glib20 shared lib version change.

Use new INSTALLS_OMF.

Approved by:    bland, kwm, marcus and pav

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Teach anjuta about the new gnu-autotools ports, and fix some problems with
command escaping during project execution.

Chase vte shlib version.

The anjuta distfile was re-rolled to remove the DISABLE_DEPRECATED flags
so that it builds cleanly with gtk+-2.4.

Update to 1.2.2.  For a list of what's changed, see:

http://lists.gnome.org/archives/gnome-announce-list/2004-April/msg00021.html

Fix threading issues with libc_r on 5.2.1 by making sure to pass -lc_r to
the linker (Dreaded Thread Problem).  Thanks to bland for digging into this.

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

IGNORE this port on 5.X as it crashes when trying to build a project.
This port needs some work to get around all of the bugs, and I don't have the
time to do that right now.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Update to 1.2.1

First stable release of Anjuta GTK+/GNOME2 finally available.
Retire -devel port.

anjuta and anjuta-devel conflict with each other.

Submitted by:   Oliver Eikemeier <eikemeier@fillmore-labs.com>

Remove REINPLACE commands that were rolled into gnomehack.

Remove USE_GNOMENG.

Update to 1.0.2.

Parts submitted by:     Koop Mast <einekoai@chello.nl>

Add missing dependency on libglade.

Reported by:    bento

* Update to 1.0.1 [1]
* De-pkg-comment

PR:     48479 [1]
Submitted by:   Koop Mast <einekoai@chello.nl> [1]

gdkpixbuf is also needed here.

Submitted by:   Volker Stolz <stolz@i2.informatik.rwth-aachen.de>

Replace gnomelibs with gnomeprint as dependency to make it building again.
Noticed on: bento

Update to 1.0.0.

Use USE_GNOMENG.

Use USE_REINPLACE.

Update to 0.1.9.    

Update to 0.1.8.    

Upgrade to 0.1.7    

Upgrade to 0.1.6    

Bring anjuta into the gnome-fifth-toe port, and adjust   maintainership
accordingly.    

New port: anjuta.    

Number of commits found: 65

19 vulnerabilities affecting 36 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities