devel/p4: Update to 2023.2 (2578891)

PR:		278177
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update to 2023.3 (2563409)

PR:		277490
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update to 2023.2 (2535420)

PR:		275919
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update to 2023.2 (2523307)

PR:		275579
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update to 2023.2

PR:		275140
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update 2023.1

PR:		273077
Approved by:	antonfb@hesiod.org (maintainer)

devel/{p4,p4api}: Update to 2023.1 release and fix armv7

PR:		271502
Approved by:	antonfb@hesiod.org (maintainer)

devel/{p4,p4api}: Unbreak build on arm

Also change devel/p4api to use devel/p4 files/patches and distinfo.

PR:		270531
Approved by:	antonfb@hesiod.org (maintainer)

devel/p4: Update to r22.2.2407422

Update MASTER_SITES including a backup site hosted by the maintainer.

Remove BROKEN lines (this version is 7 years newer).

While here, adjust the PR patchset to eliminate DIST_SUBDIR and
embed the version string into the downloaded package.

PR:		270387
Approved by:	antonfb@hesiod.org (maintainer)

devel/{p4,p4api}: Unbreak MASTER_SITES, update maintainership

Welcome, new port maintainer!

PR:		270320

devel/{p4,p4api}: relinquish maintainership

I haven't used these ports for 5 years, and I cannot test changes to
them.

PR:		270245
Approved by:	fernape (ports)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  <jkoshy@FreeBSD.org>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron H. K. Diep <ahkdiep@gmail.com>
  *  Aaron Hurt <ahurt@anbcs.com>
  *  Abel Chow <abel_chow@yahoo.com>
  *  Adam McLaurin
  *  Adam Saponara <as@php.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>

cleanup: drop support for EOL FreeBSD 11.X

Search criteria used:
- 11.4
- OSREL*
- OSVER*
- *_FreeBSD_11

Input from:
- adridg: devel/qca-legacy
- jbeich: _WITH_DPRINTF, _WITH_GETLINE, GNU bfd workarounds
- sunpoet: security/p5-*OpenSSL*

Reviewed by:	doceng, kde, multimedia, perl, python, ruby, rust
Differential Revision: https://reviews.freebsd.org/D32008
Test Plan: make index

Remove # $FreeBSD$ from Makefiles.

devel/p4: unbreak on powerpc64 elfv2

ELFv2 uses Clang which can build this port.

devel/p4: fix the build with alternate OpenSSL implementations

When setting DEFAULT_VERSIONS+=ssl=anything, p4 needs to use OPENSSLINC.

PR:		236548
Reported by:	Tassilo Philipp <tphilipp@potion-studios.com>
MFH:		2019Q1

devel/p4: fix build with OpenSSL 1.1

PR:		229021
Reported by:	brnrd
Submitted by:	ken
MFH:		2018Q4

Mark various ports broken on powerpc64.

Approved by:	portmgr (tier-2 blanket)

Mark as broken on mips64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

devel/p4: build with SSL support

SSL support was inadvertenly removed from devel/p4 (but not devel/p4api) by
r460727.  This change restores it.

PR:		226352
Reported by:	Mike Durian <durian@boogie.com>

devel/p4 devel/p4api: cache distfiles in LOCAL

Perforce unhelpfully rebuilds their distfiles every few hours, changing the
archived files' timestamps in the process. This obviously changes their
checksums. Work around the issue by caching local copies of the distfiles and
using those for the checksums.

Also, set a sane DIST_SUBDIR since the distfiles are ambiguously named.

Also, take over maintainership from gordon.

Reported by:	gordon, antoine
Reviewed by:	mat
Approved by:	mat (ports)
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D14211

devel/p4 devel/p4api: build from source

Build devel/p4 and devel/p4api from source rather than use the prebuilt
binary downloads. This fixes p4api on FreeBSD 12.  The ports originally used
the binaries because source wasn't available until a few years ago.  By
happy accident, building from source also makes the ports available on
non-Intel architectures.

PR:		225613
Reviewed by:	brd
Approved by:	brd (ports)
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D14162

Update Perforce ports to 2016.1/1492381.

MFH:		2017Q1 (Blanket)

remove RESTRICTED from devel/p4 and devel/p4api

devel/p4 and devel/p4api are BSD licensed, even though the distfile does not
include any license file. The source for these ports is separately
distributed through swarm.workshop.perforce.com, and Perforce support
assures me that the license found in the source also applies to the binary
distfile used by these ports.

PR:		215662
Reviewed by:	mat, gordon
Approved by:	mat (ports)
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D8623

Cleanup BROKEN/IGNORE for 10.3-

Sponsored by:	Absolight

Update devel/p4 due to micropatching.

Reported by:	avg@
MFH:		2016Q4 (Blanket)

Update Perforce related ports due to micropatching.

Submitted by:	asomers@
MFH:		2016Q4 (Blanket)
Differential Revision:	https://reviews.freebsd.org/D8534

Mark BROKEN due to checksum mismatch. Again.

Approved by:	portmgr blanket

Update devel ports for p4, p4d, and p4api for micropatching.

MFH:		2016Q4

Update Perforce ports due to micropatching.

PR:		213172
Approved by:	mat (implicit, mentor)
MFH:		2016Q4

Update devel/p4, p4d, p4api to 2016.1/1429894 due to micropatching.

MFH:		2016Q3

Update Perforce related ports due to micropatching.

Approved by:	mat (mentor, implicit)
MFH:		2016Q3
Differential Revision:	 https://reviews.freebsd.org/D7220

Update Perforce related ports to 2016.1.

PR:		210358
Reported by:	brd
Approved by:	mat (mentor, previous version)
Differential Revision:	https://reviews.freebsd.org/D6905

Update various Perforce ports to 2015.1/1384697 due to micropatching.

Approved by:	mat (mentor, implicit)
MFH:		2016Q2

Update devel/p4 and p4d to 2015.1/1362963 for micropatching.

Approved by:	mentors (implicit)
MFH:		2016Q1

- Mark broken, again

fetch: http://filehost.perforce.com/perforce/r15.1/bin.freebsd100x86_64/p4: size
mismatch: expected 2818912, actual 2794288

Approved by:	portmgr blanket

Update p4 binary ports to 2015.1/1341249 due to micropatching.

Approved by:	mat (mentor, implicit)
MFH:		2016Q1

- Mark BROKEN: checksum mismatch

=> SHA256 Checksum mismatch for perforce/2015.1.1314399/bin.freebsd100x86_64/p4.

Reported by:	pkg-fallout
Approved by:	portmgr blanket

Update devel/p4 to 2015.1/1314399

Approved by:	mat (mentor, implicit)
MFH:		2015Q4

Update devel/p4 to 2015.1/1252202 to accommodate micropatching.

Approved by:	mat (mentor, implicit)
MFH:		2015Q4

Mark BROKEN: checksum mismatch

Reported by:	pkg-fallout
MFH:		2015Q4

Update devel/p4 and devel/p4d to 2015.1/1227227

Approved by:	mat (mentor, implicit)
MFH:		2015Q3

Update devel/p4, devel/p4d, and devel/p4p to 2015.1/1227227.

Fixes micropatching update breakage.

Approved by:	mat (mentor, implicit)
MFH:		2015Q3

Accidentally forgot to remove the broken line.

Submitted by:	jkim@
MFH:		2015Q3

Update devel/p4* ports to 2015.1/1204891

Approved by:	erwin (mentor)
MFH:		2015Q3
Differential Revision:	https://reviews.freebsd.org/D3177

=> Attempting to fetch
ftp://ftp.perforce.com/perforce/r15.1/bin.freebsd100x86_64/p4
fetch: ftp://ftp.perforce.com/perforce/r15.1/bin.freebsd100x86_64/p4: size
mismatch: expected 2815472, actual 2815536

Sponsored by:	Absolight

Update to devel/p4 2015.1/1126382 to fix broken port.
Migrate common variable for the devel/p4* ports into the Makefile.inc.

PR:		201216
Differential Revision:	https://reviews.freebsd.org/D3088
Approved by:	mat (mentor)
MFH:		2015Q3

Revert r391601 "- devel/p4: Unbreak"

I have to fix all the p4* ports too.
Teach me to fix something.

Pointyhat to: myself

- devel/p4: Unbreak

- Fix distinfo things

- Mark BROKEN: checksum mismatch

=> Attempting to fetch
ftp://ftp.perforce.com/perforce/r14.2/bin.freebsd100x86_64/p4
fetch: ftp://ftp.perforce.com/perforce/r14.2/bin.freebsd100x86_64/p4: size
mismatch: expected 2732720, actual 2755088
=> Attempting to fetch
http://filehost.perforce.com/perforce/r14.2/bin.freebsd100x86_64/p4
fetch: http://filehost.perforce.com/perforce/r14.2/bin.freebsd100x86_64/p4: size
mismatch: expected 2732720, actual 2755088

Approved by:	portmgr blanket
Reported by:	pkg-fallout

Update p4 to 2014.2/1045032

Approved by:	mentor (mat, implicit)
MFH:		2015Q2

Update to 2014.2/1033284 to fix checksum mismatch.

Approved by:	mentor (mat, implicit)
MFH:		2015Q2

Mark BROKEN: unfetchable

Reported by:	pkg-fallout

Remove OSVERSION checks that do not make sense any more.

For example (${OSVERSION} >= 900000 && ${OSVERSION} < 900021) is always true,
as is (${OSVERSION} > 900002 || ${OSVERSION} < 900000 && ${OSVERSION} > 800107).

Regarding patches, when an EXTRA_PATCHES is no longer needed, I remove it, when
it is always needed, I renamed it, in one case, I merged two patches.

Differential Revision:	https://reviews.freebsd.org/D2209

Update devel/p4 and devel/p4d to 2014.2.978861.

Differential Revision:	https://reviews.freebsd.org/D1449
Approved by:		erwin (mentor)
MFH:			2015Q1

devel/p4: Limit use to FreeBSD

Update Perforce related ports to 2014.2/962050.
Fix typo in fallback URI on a couple of the ports.

Differential Revision:	https://reviews.freebsd.org/D1229
Approved by:		mat (mentor), erwin (mentor)
MFH:			2014Q4

Update Perforce ports to 2014.2.

p4 2014.2.943801
p4d 2014.2.935585
p4ftpd 2014.2.935585
p4p 2014.2.935585

Approved by:	mat (mentor)

- Update to the latest upstream versions:
  - 2014.1 for p4, p4d, p4ftpd, p4p
  - 2012.1 build update for 10.x releases

PR:		191648
Submitted by:	gordon (maintainer)
Approved by:	mentors (implicit)

Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

Update p4 client to 2012.1/473528.

Prodded by: rpaulo

Update p4 to 2011.1/393975.

Update p4 client to 2011.1/389946

Upgrade Perforce related ports to 2011.1/370818. Of note is the loss of
sparc64 and support for FreeBSD 5.x releases. Older versions of Perforce
are still supported and those needing support for those platforms can
download the last version at ftp://ftp.perforce.com/perforce/r10.2/

Submitted by:   gibbs@
Feature safe:   yes

Update p4 port to 2010.2/295040.

Update to new version of Perforce 2010.2/279478.

Deprecate md5 in favour of sha256 checksums.  md5 checksums will no longer
be generated or checked, and will be silently ignored for now.  Also,
generalize the MD5_FILE macro to DISTINFO_FILO.

PR:             149657
Submitted by:   rene
Approved by:    portmgr
Tested on:      pointyhat i386 7-exp

Update to new version of Perforce 2010.1/265509.

Update Perforce ports to 2010.1.

p4 is the client part of the Perforce Control System.
Update to 2009.2.238357

For the server-related parts, use devel/perforce

PR:             ports/145824
Submitted by:   gordon
Approved by:    tabthorpe (mentor)

Forced commit to note repocopy of devel/perforce to devel/p4

PR:             ports/146070
Submitted by:   rene
Approved by:    tabthorpe (mentor)
Repocopy by:    marcus