FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Port details
p5-Async-MergePoint Perl modules that resynchronise diverged control flow
0.04_1 devel on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: johan@stromnet.se search for ports maintained by this maintainer
Port Added: 04 Aug 2009 12:19:33
Also Listed In: perl5
License: not specified in port
Often in program logic, multiple different steps need to be taken that
are independent of each other, but their total result is needed before
the next step can be taken. In synchonous code, the usual approach is
to do them sequentially.

An asynchronous or event-based program could do this, but if each step
involves some IO idle time, better overall performance can often be
gained by running the steps in parallel. A Async::MergePoint object
can then be used to wait for all of the steps to complete, before
passing the combined result of each step on to the next stage.

This module was originally part of the IO::Async distribution, but was
removed under the inspiration of Pedro Melo's Async::Hooks
distribution, because it doesn't itself contain anything IO-specific.

WWW:    http://search.cpan.org/dist/Async-MergePoint/
SVNWeb : Homepage : PortsMon

To install the port: cd /usr/ports/devel/p5-Async-MergePoint/ && make install clean
To add the package: pkg install p5-Async-MergePoint

PKGNAME: p5-Async-MergePoint

distinfo:

SHA256 (Async-MergePoint-0.04.tar.gz) = 128919127fca8787498f281292ced8da385750508803916b3686b64224b6c7a4
SIZE (Async-MergePoint-0.04.tar.gz) = 15046


NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. perl5>=5.20<5.21 : lang/perl5.20
Runtime dependencies:
  1. perl5>=5.20<5.21 : lang/perl5.20
There are no ports dependent upon this port

Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/Async/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Async/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/Async/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/Async/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/Async/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/Async/
  8. http://backpan.perl.org/modules/by-module/Async/
  9. http://cpan.metacpan.org/modules/by-module/
  10. http://cpan.metacpan.org/modules/by-module/Async/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/Async/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/Async/
  13. http://www.cpan.dk/modules/by-module/Async/
  14. http://www.cpan.org/modules/by-module/Async/

Number of commits found: 10

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
01 Apr 2016 14:00:57
Original commit files touched by this commit  0.04_1
Revision:412346
mat search for other commits by this committer
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight
26 Nov 2014 13:08:38
Original commit files touched by this commit  0.04_1
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
07 Nov 2014 13:51:11
Original commit files touched by this commit  0.04
Revision:372262
mat search for other commits by this committer
Replace some occurences of mach with PERL_ARCH (and a couple of other small noop
fixes.)

With hat:	perl@
Sponsored by:	Absolight
05 Feb 2014 14:37:25
Original commit files touched by this commit  0.04
Revision:342714
ehaupt search for other commits by this committer
Support staging.
20 Sep 2013 17:13:47
Original commit files touched by this commit  0.04
Revision:327724
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
09 Sep 2013 17:31:07
Original commit files touched by this commit  0.04
Revision:326823
az search for other commits by this committer
- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)
08 Sep 2012 14:46:53
Original commit files touched by this commit  0.04
Revision:303909
swills search for other commits by this committer
- Update to 0.04

PR:		ports/170967
Approved by:	maintainer timeout (johan@stromnet.se, >2 weeks)
11 Feb 2012 22:46:23
Original commit files touched by this commit  0.03
pgollucci search for other commits by this committer
- Add TEST_DEPENDS

PR:             ports/164895
Submitted by:   swills
Approved by:    johan@stromnet.se (maintainer)
03 Jul 2011 14:59:23
Original commit files touched by this commit  0.03
ohauer search for other commits by this committer
-remove MD5
04 Aug 2009 12:18:58
Original commit files touched by this commit  0.03
lippe search for other commits by this committer
Often in program logic, multiple different steps need to be taken that
are independent of each other, but their total result is needed before
the next step can be taken. In synchonous code, the usual approach is
to do them sequentially.

An asynchronous or event-based program could do this, but if each step
involves some IO idle time, better overall performance can often be
gained by running the steps in parallel. A Async::MergePoint object
can then be used to wait for all of the steps to complete, before
passing the combined result of each step on to the next stage.

This module was originally part of the IO::Async distribution, but was
removed under the inspiration of Pedro Melo's Async::Hooks
distribution, because it doesn't itself contain anything IO-specific.

WWW:    http://search.cpan.org/dist/Async-MergePoint/

Number of commits found: 10

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
mailmanAug 29
libxml2Aug 28
kdelibs4Aug 27
eogAug 22
p5-PathTools*Aug 22
p5-XSLoader*Aug 22
perl5-devel*Aug 22
perl5-devel*Aug 22
perl5-devel*Aug 22
perl5.18*Aug 22
perl5.18*Aug 22
perl5.18*Aug 22
perl5.20*Aug 22
perl5.20*Aug 22
perl5.20*Aug 22

12 vulnerabilities affecting 48 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 26188
Broken 93
Deprecated 144
Ignore 363
Forbidden 0
Restricted 199
No CDROM 83
Vulnerable 65
Expired 16
Set to expire 130
Interactive 0
new 24 hours 6
new 48 hours10
new 7 days35
new fortnight50
new month116

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.