FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Please give me your LTO-4 or better tape library and I'll put it to good use.
Port details
p5-Test-Benchmark Make sure something really is faster
0.004_2 devel on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: sunpoet@FreeBSD.org search for ports maintained by this maintainer
Port Added: 14 Jul 2006 16:02:55
Also Listed In: perl5
License: LGPL21
Sometimes you want to make sure that your "faster" algorithm really is faster
than the old way. This lets you check. It might also be useful to check that
your super whizzo XS or Inline::C version is actually faster.

This module is based on the standard Benchmark module. If you have lots of
timings to compare and you don't want to keep running the same benchmarks all
the time, you can pass in a result object from Benchmark::timethis() instead of
sub routine reference.

WWW: http://search.cpan.org/dist/Test-Benchmark/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. perl5.20.2 : lang/perl5.20
Runtime dependencies:
  1. perl5.20.2 : lang/perl5.20

This port is required by:

for Build * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

To install the port: cd /usr/ports/devel/p5-Test-Benchmark/ && make install clean
To add the package: pkg install devel/p5-Test-Benchmark


Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/modules/by-module/Test/
  2. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Test/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/Test/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/Test/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/modules/by-module/Test/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/modules/by-module/Test/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/Test/
  8. http://backpan.perl.org/modules/by-module/Test/
  9. http://cpan.metacpan.org/modules/by-module/Test/
  10. http://distcache.FreeBSD.org/ports-distfiles/
  11. http://ftp.jaist.ac.jp/pub/CPAN/modules/by-module/Test/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/modules/by-module/Test/
  13. http://www.cpan.dk/modules/by-module/Test/
  14. http://www.cpan.dk/modules/by-module/Test/
  15. http://www.cpan.org/modules/by-module/Test/

Number of commits found: 16

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
24 Jun 2015 16:05:48
Original commit files touched by this commit  0.004_2
Revision:390491
adamw search for other commits by this committer
Switch p5-Test-Tester dependencies to p5-Test-Simple, but only on
perl < 5.22. Bump PORTREVISION where necessary.
26 Nov 2014 13:08:38
Original commit files touched by this commit  0.004_2
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
27 Oct 2014 10:55:59
Original commit files touched by this commit  0.004_1
Revision:371547
bapt search for other commits by this committer
Cleanup plist
31 Jul 2014 10:04:48
Original commit files touched by this commit  0.004_1
Revision:363549
sunpoet search for other commits by this committer
- Add LICENSE
- Fix *_DEPENDS: p5-Test-Tester and p5-Test-NoWarnings are test-only
dependencies
- Bump PORTREVISION for dependency change
- Sort PLIST
- Reformat pkg-descr
30 Jun 2014 16:42:18
Original commit files touched by this commit  0.004
Revision:359884
sunpoet search for other commits by this committer
- Take maintainership
30 Jun 2014 05:51:03
Original commit files touched by this commit  0.004
Revision:359802
eadler search for other commits by this committer
multiple: reset gslin's maintainer
	By request of Gea-Suan Lin <gslin@gslin.org> - reset ports to ports@FreeBSD.

	Gea-Suan Lin's work is much appreciated.

Approved by:	portmgr (implicit) (not really, skipping NO_STAGE check)
29 Jan 2014 09:19:35
Original commit files touched by this commit  0.004
Revision:341707
az search for other commits by this committer
- add stage support

Approved by:	portmgr (blanket infrastructure)
20 Sep 2013 17:13:47
Original commit files touched by this commit  0.004
Revision:327724
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
09 Sep 2013 11:55:30
Original commit files touched by this commit  0.004
Revision:326803
az search for other commits by this committer
- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)
30 Jun 2012 05:30:10
Original commit files touched by this commit  0.004
az search for other commits by this committer
- Remove SITE_PERL from *_DEPENDS

Approved by: portmgr@ (bapt@)
21 Jan 2012 17:40:15
Original commit files touched by this commit  0.004
eadler search for other commits by this committer
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.

Explicit duplication > := > = and this just moves ports one step to the left

Approved by:    portmgr
03 Jul 2011 14:59:23
Original commit files touched by this commit  0.004
ohauer search for other commits by this committer
-remove MD5
24 Sep 2010 02:03:44
Original commit files touched by this commit  0.004
pgollucci search for other commits by this committer
- only 13% of the p5- ports embed @comment $FreeBSD$:
  so standarize and remove it

With Hat:   perl@
22 Jul 2009 16:27:08
Original commit files touched by this commit  0.004
pgollucci search for other commits by this committer
- lang/perl5.6 is dead, remove PERL_LEVEL/PERL_VERSION < 500801 checks

PR:             ports/135398
Tested by:      2 -exp runs by pav
Approved by:    portmgr (pav)
17 Apr 2008 14:30:31
Original commit files touched by this commit  0.004
araujo search for other commits by this committer
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)
14 Jul 2006 16:02:40
Original commit files touched by this commit  0.004
erwin search for other commits by this committer
Sometimes you want to make sure that your "faster" algorithm really is
faster than the old way. This lets you check. It might also be useful
to check that your super whizzo XS or Inline::C version is actually
faster.

This module is based on the standard Benchmark module. If you have
lots of timings to compare and you don't want to keep running the same
benchmarks all the time, you can pass in a result object from
Benchmark::timethis() instead of sub routine reference.

Author: Fergal Daly <fergal@esatclear.ie>
WWW:    http://search.cpan.org/dist/Test-Benchmark/

PR:             ports/100218
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

Number of commits found: 16

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
libidn*Aug 03
chicken*Jul 31
net-snmpJul 31
net-snmpJul 31
bind910Jul 28
bind99Jul 28
logstashJul 27
openssh-portableJul 27
chromiumJul 25
wordpress*Jul 24
wordpress*Jul 24
wordpress*Jul 24
wordpress*Jul 24
wordpress-zh_TW*Jul 24
opensaml2Jul 23

14 vulnerabilities affecting 25 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 25081
Broken 197
Deprecated 106
Ignore 498
Forbidden 1
Restricted 204
No CDROM 94
Vulnerable 44
Expired 1
Set to expire 94
Interactive 0
new 24 hours 0
new 48 hours0
new 7 days17
new fortnight53
new month157

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.