FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

Please give me your LTO-4 or better tape library and I'll put it to good use.
Port details
p5-accessors Create accessor methods in caller's package
1.01_1 devel on this many watch lists=0 search for ports that depend on this port Find issues related to this port Report an issue related to this port
Maintainer: leeym@FreeBSD.org search for ports maintained by this maintainer
Port Added: 17 Sep 2005 02:21:01
Also Listed In: perl5
License: not specified in port
The accessors pragma lets you create simple accessors at compile-time.

This saves you from writing them by hand, which tends to result in cut-n-paste
errors and a mess of duplicated code. It can also help you reduce the amount
of unwanted direct-variable access that may creep into your code base when
you're feeling lazy. accessors was designed with laziness in mind.

Method-chaining accessors are generated by default. This may be changed in
future versions! If you want backwards compatibility use accessors::chained
and wait until the dust settles.

See accessors::classic for accessors that always return the current value if
you don't like method chaining.

WWW: http://search.cpan.org/dist/accessors/
SVNWeb : Homepage : Distfiles Availability : PortsMon

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:
  1. p5-Module-Build>=0.4206 : devel/p5-Module-Build
  2. perl5.18.4 : lang/perl5.18
Runtime dependencies:
  1. perl5.18.4 : lang/perl5.18

This port is required by:

for Build for Run * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...

To install the port: cd /usr/ports/devel/p5-accessors/ && make install clean
To add the package: pkg install devel/p5-accessors


Configuration Options
     No options to configure

USES:
perl5

Master Sites:
  1. ftp://ftp.auckland.ac.nz/pub/perl/CPAN/authors/id/S/SP/SPURKIS/
  2. ftp://ftp.cpan.org/pub/CPAN/authors/id/S/SP/SPURKIS/
  3. ftp://ftp.cpan.org/pub/CPAN/modules/by-module/
  4. ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/S/SP/SPURKIS/
  5. ftp://ftp.kddlabs.co.jp/lang/perl/CPAN/authors/id/S/SP/SPURKIS/
  6. ftp://ftp.mirrorservice.org/sites/cpan.perl.org/CPAN/authors/id/S/SP/SPURKIS/
  7. ftp://ftp.sunet.se/pub/lang/perl/CPAN/authors/id/S/SP/SPURKIS/
  8. http://backpan.perl.org/authors/id/S/SP/SPURKIS/
  9. http://cpan.metacpan.org/authors/id/S/SP/SPURKIS/
  10. http://distcache.FreeBSD.org/ports-distfiles/
  11. http://ftp.jaist.ac.jp/pub/CPAN/authors/id/S/SP/SPURKIS/
  12. http://ftp.twaren.net/Unix/Lang/CPAN/authors/id/S/SP/SPURKIS/
  13. http://www.cpan.dk/authors/id/S/SP/SPURKIS/
  14. http://www.cpan.dk/modules/by-module/
  15. http://www.cpan.org/authors/id/S/SP/SPURKIS/

Number of commits found: 16

Commit History - (may be incomplete: see SVNWeb link above for full details)
DateByDescription
26 Nov 2014 13:08:38
Original commit files touched by this commit  1.01_1
Revision:373448
mat search for other commits by this committer
Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the
(Only the first 15 lines of the commit message are shown above View all of this commit message)
27 Oct 2014 10:55:59
Original commit files touched by this commit  1.01
Revision:371547
bapt search for other commits by this committer
Cleanup plist
06 Feb 2014 09:26:01
Original commit files touched by this commit  1.01
Revision:342982
ehaupt search for other commits by this committer
Support staging.
20 Sep 2013 17:13:47
Original commit files touched by this commit  1.01
Revision:327724
bapt search for other commits by this committer
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)
09 Sep 2013 18:34:59
Original commit files touched by this commit  1.01
Revision:326839
az search for other commits by this committer
- convert to the new perl5 framework
- trim Makefile header

Approved by:	portmgr (bapt@, blanket)
08 Sep 2011 08:36:43
Original commit files touched by this commit  1.01
az search for other commits by this committer
- Replace ../../authors in MASTER_SITE_SUBDIR with CPAN:CPANID macro.
  See http://wiki.freebsd.org/Perl for details.
- Change maintainership from ports@ to perl@ for ports in this changeset.

With perl@ hat
03 Jul 2011 14:59:23
Original commit files touched by this commit  1.01
ohauer search for other commits by this committer
-remove MD5
22 Jun 2008 15:06:11
Original commit files touched by this commit  1.01
leeym search for other commits by this committer
- update to 1.01
23 May 2008 21:18:39
Original commit files touched by this commit  1.00
olgeni search for other commits by this committer
Hunt for typos in devel/p5-*.
19 May 2008 13:12:08
Original commit files touched by this commit  1.00
araujo search for other commits by this committer
- Include some ports in perl5 category.

PR:             ports/123530
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    flz (portmgr)
17 Apr 2008 14:30:31
Original commit files touched by this commit  1.00
araujo search for other commits by this committer
- Take advantage of CPAN macro from bsd.sites.mk, change
${MASTER_SITE_PERL_CPAN} to CPAN.

PR:             ports/122674
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>
Reworked by:    araujo (myself)
Approved by:    portmgr (pav)
21 Mar 2008 18:32:05
Original commit files touched by this commit  1.00
leeym search for other commits by this committer
- add pkg-plist needed by 1.00
21 Mar 2008 18:31:49
Original commit files touched by this commit  1.00
leeym search for other commits by this committer
- update to 1.00
01 Feb 2007 07:02:03
Original commit files touched by this commit  0.02
leeym search for other commits by this committer
- remove legacy support code for Perl 5.005_03
22 Jan 2006 08:30:12
Original commit files touched by this commit  0.02
edwin search for other commits by this committer
SHA256ify

Approved by:    krion@
17 Sep 2005 02:20:35
Original commit files touched by this commit  0.02
leeym search for other commits by this committer
- add p5-accessors-0.02

  The accessors pragma lets you create simple accessors at compile-time.

Number of commits found: 16

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
php5Apr 25
php55Apr 25
php56Apr 25
wpa_supplicantApr 25
wordpress*Apr 24
wordpress*Apr 24
wordpress*Apr 24
wordpress*Apr 24
wordpress-zh_CN*Apr 24
wordpress-zh_TW*Apr 24
libtasn1Apr 22
firefoxApr 21
linux-firefoxApr 21
chronyApr 18
sqlite3Apr 18

11 vulnerabilities affecting 34 ports have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 24692
Broken 252
Deprecated 49
Ignore 522
Forbidden 1
Restricted 204
No CDROM 95
Vulnerable 21
Expired 0
Set to expire 42
Interactive 0
new 24 hours 1
new 48 hours2
new 7 days14
new fortnight29
new month109

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2014 Dan Langille. All rights reserved.