07:54 antoine 

Deprecate a few ports

With hat:	portmgr

 

11:39 tobik 

devel: Add missing USES={gl,gnome,php,sdl}

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

21:19 antoine 

- Remove dependency on python2 metaport
- Add explicit FLAVOR to dependency (useful when using
  DEFAULT_VERSIONS=python=3.x)

 

16:22 amdmi3 

- Add LICENSE_FILE

 

22:27 rene 

Reset mva@'s ports, he handed in his ports bit.

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

16:14 amdmi3 

- Fix installed file referring to stagedir
- Add NO_ARCH

Approved by:	portmgr blanket
MFH:		2015Q3 (blanket)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

17:04 mva 

- Rename PYTHON_FEATURES to USE_PYTHON to comply to USE_PERL5 and to avoid a
  conflict in behaviour with the read-only COMPILER_FEATURES knob
- Fix the deprecated USE_PYTHON_BUILD and USE_PYTHON_RUN behaviour, which
  usually should be mutually exclusive, but some ports include both knobs

Phabric:		D581
Recommended by:	danfe@, makc@
Reviewed by:	danfe, wg, antoine
Approved by:	portmgr
With hat:		python@

 

08:55 mva 

- Convert my ports to USES=python

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

10:13 mva 

- Enable stagedir support
- Restrict python compatibility
- Use PYDISTUTILS_AUTOPLIST
- Add LICENSE

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

17:13 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3)

 

05:26 dinoex 

- update png to 1.5.10

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

00:18 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with D

13:57 dinoex 

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

21:45 mva 

Updated my mail address to use @FreeBSD.org now.

Approved by: miwi (co-mentor), beech (mentor)

14:34 pav 

- Remove USE_GCC where it can be satisfied with base compiler on following
  FreeBSD versions: 5.3 and up, 6.x, 7.x, 8-CURRENT

13:21 edwin 

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

19:23 miwi 

- Update to 0.2.9

PR:             123595
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

10:52 lwhsu 

- Update to 0.2.8

PR:             ports/119523
Submitted by:   Marcus von Appen <mva AT sysfault.org>

09:42 alexbl 

 - Make Python 2.5.1 the default Python version
 - Add significantly better support in bsd.python.mk for working with
   Python Eggs and the easy_install system

Tested by:      pointyhat runs
Approved by:    pav (portmgr)
Most work by:   perky
Thanks to:      pav

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

14:58 miwi 

- Update to 0.2.7

PR:             110717
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

09:50 miwi 

- Update to 0.2.6

PR:             108649
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

16:15 miwi 

- Update to 0.2.5

PR:             108237
Submitted by:   Marcus von Appen<mva@sysfault.org> (maintainer)

11:56 miwi 

- Update to 0.2.4

PR:             107817
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

10:03 alexbl 

 - update to 0.2.3

PR:             105699
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

21:35 alexbl 

 - update to 0.2.2
 - pass maintainership to submitter

PR:             105360
Submitted by:   Marcus von Appen <mva@sysfault.org>
Approved by:    maintainer (myself)

09:02 miwi 

- Update to 0.2.1

PR:             ports/102889
Submitted by:   Marcus von Appen <mva(at)sysfault.org>
Approved by:    Alexander Botero-Lowry (maintainer)

03:21 alexbl 

Change all my MAINTAINER lines to my new FreeBSD.org address.

Approved by:    novel

19:29 acm 

New port: devel/py-ocempgui

OcempGUI is a small toolkit, which comes with various modules suitable for
event management, user interfaces, 2D drawing and accessibility.

OcempGUI enables developers to enhance their python and/or pygame applications
and games easily with graphical UI elements such as buttons, entry boxes,
scrolling abilities and more as well as simple event brokers or features, which
enhance the program by adding accessibility to its objects.

It can save a developer much time by providing a broad range of drawing
routines and ready-to-use event capable object types. The developer can focus
on the main tasks instead of taking care about needed low-level components,
which are given to him with OcempGUI.

WWW: http://ocemp.sourceforge.net/gui.html

PR:             101397
Submitted by:   Alexander Botero-Lowry <alex__@__foxybanana.com>
Approved by:    garga (mentor)