05:35 Don Lewis (truckman) 

dns/wdns: upgrade to version 0.12.0

0.12.0:
 * Add EDNS output to wdns_message_to_str().

 * Fix memory leak triggered by multiple OPT records in messages.

 * Fixes multiple bugs in base32 encoding, NSEC bitmap parsing, and
   HTTPS svcparam parsing.

 * Fix out of bounds memory write in wdns_str_to_name.

 * Fix handling of no address for client subnets.

Bump PORTREVISION of dependent ports.

MFH:		2023Q3
Sponsored by:	DomainTools LLC

    e81c9f1

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

05:31 Don Lewis (truckman) 

dns/wdns: Upgrade to version 0.11.0

  * Improve support for CAA records. (CAA was previously rendered as a
    "generic" rdata type.)

  * Bug fix for NSEC/NSEC3/CSYNC: do not output empty rrtype bitmaps
    per RFC6840 section 6.4.

  * Fix parsing of A6 records that ommit and address portion. Correct
    parsing of A6 records with prefix length 0. Correct handling of
    A6 address bytes. The address bytes of an A6 record are an address
    suffix relative to the prefix represented by the domain name, and
    so must be copied to and from the lower order bytes of the internal
    address representation. These A6 code updates were for the purposes
    of clearing "round trip" test errors in the existing code base.
    (A6 is deprecated and was moved to historic status.)

  * Fix bug in IPv6 prefix length processing in
    _wdns_str_to_rdata_ubuf().

  * Add support for SVCB and HTTPS resource record types. This is based
    on an Internet-Draft but is widely used in the real world.
    https://datatracker.ietf.org/doc/html/draft-ietf-dnsop-svcb-https-08

Bump PORTREVISION of dependent ports due to shared library version
change.

Sponsored by:	DomainTools

    9c3e1c5

18:15 Don Lewis (truckman) 

dns/py-pywdns: Upgrade to version 0.10.1

  * Add GenConstants command

  * Linux packaging changes

Sponsored by:	Farsight Security, Inc.

    17a5970

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

13:46 kai 

Relax hardcoded paths to fix build with Python 3.8.7

Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme.  This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".

The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.

Remedy the issue by adding wildcards to these paths.  This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.

[1] https://bugs.python.org/issue42604

PR:		252057
Reported by:	John Kennedy
Reviewed by:	fluffy, koobs
Approved by:	koobs (python)

 

07:16 truckman 

Upgrade dns/py-pywdns to version 0.10.0, which is compatible with python3.
Undeprecate and remove expiration date.

Sponsored by:	Farsight Security, Inc.

 

15:25 antoine 

Deprecate a few ports

With hat:	portmgr

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

01:42 truckman 

Upgrade to pywdns version 0.9.0.

 * Depends on the wdns C library >= 0.9.0.

 * Add contants TYPE_TLSA, TYPE_GID, TYPE_EUI64, etc.

 * Stores EDNS information in the message object.

Pet portlint (USE vs. USES order).

Sponsored by:	Farsight Security, Inc.

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

20:34 truckman 

Sort USE_PYTHON

Sponsored by:	Farsight Security, Inc.

 

02:39 truckman 

Upgrade to pywdns revsion 0.8.0.

pywdns (0.8.0)

 * Add str_to_rcode and str_to_name_case functions

 * Add str_to_name_case function

 * Add str_to_rcode function

 * Add str_to_rrclass and str_to_rdata functions from wdns

 * domain_to_str(): PyString_FromStringAndSize -> PyString_FromString

   this fixes a regression introduced in d04d3919. wdns_domain_to_str()
   does not return the number of bytes written to dst, it returns the
   number of bytes read from src. dst is guaranteed to be NUL-terminated
   after a call to wdns_domain_to_str(), so switch back to using
   PyString_FromString() to convert dst to a python string.

 * the comparison against WDNS_MAXLEN_NAME should be strictly greater
   than, not greater than or equal to.

 * setup.py: add back missing 'import os'

Sponsored by:	Farsight Security, Inc.

 

18:54 truckman 

Use ${PYTHON_SITELIBDIR} instead of hardwiring a specific python version.

Differential Revision:	https://reviews.freebsd.org/D2228
Approved by:	mat (mentor)
Sponsored by:	Farsight Security, Inc.

 

23:40 truckman 

Add new port dns/py-pywdns.

This is pywdns, a Python extension module implemented in Cython
for the wdns C library.

Differential Revision:	https://reviews.freebsd.org/D2200
Approved by:	mat (mentor)
Sponsored by:	Farsight Security, Inc.