A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 45

Update my ports to my freebsd address

Approved by:    araujo (mentor)

- Pass maintainership to submitter.
- Make a little improve in PLIST_SUB.

PR:             ports/125643
Submitted by:   Philip M. Gollucci <pgollucci@p6m7g8.com>

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Correct plist for xemacs and xemacs21-mule.

Reported by:    pointyhat via pav

- Update xemacs and xemacs21-mule to 21.4.21

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Add emacs-22.* to CONFLICTS.

PR:             ports/111814
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>

- LIB_DEPENDS is missing a slash
- DEFAULT_PGSQL_VER is only set if USE_PGSQL is defined

PR:             110189
Submitted by:   Ulrich Spoerlein <uspoerlein@gmail.com>
Pointy hat to: db

- Don't link in postgresql client library unless specifically asked for

Approved by: ehaupt (mentor)

Fix plist

Reported by:    pointyhat via kris

Update xemacs and xemacs21-mule to 21.4.20 "Double Solitaire".

Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.

Submitted by:   mezz, ahze, pav, and many others
Approved by:    portmgr (implicit, kris)

Optionally enable OpenLDAP through knob WITH_LDAP

Update xemacs and xemacs21-mule to 21.4.19

editors/emacs20 was changed not to conflict with other emacsen.

PR:             ports/90477
Submitted by:   NIIMI Satoshi <sa2c@sa2c.net>
Approved by:    sem(mentor)

- Update to 21.4.18

PR:             ports/90011
Submitted by:   Andrey Slusar <anrays@gmail.com>

Fix XEmacs working under amd64.

PR:             ports/89559
Submitted by:   Andrey Slusar

- Fix PLIST problem on amd64. Unbreak.

PR:             ports/89250
Submitted by:   Andrey Slusar

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Make packages optional (WITHOUT_XEMACS_PACKAGES).
- Remove dependency on mail/faces (it is not required for an base
  editor configuration and it pulls in gtk1 and what comes with that.
- Integrate with the GNOME desktop if installed.

PR:             ports/68826
Submitted by:   Pawel Worach <pawel.worach@telia.com>

Add CONFLICTS variable, since this port conflicts with other
emacs/xemacs ports.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Reset bouncing maintainer address:

   ----- The following addresses had permanent fatal errors -----
<pawel.worach@telia.com>
    (reason: 550 RCPT TO:<pawel.worach@telia.com> User unknown)

BROKEN on amd64: Incomplete pkg-plist

Approved by:    portmgr (self)

- Remove forgotten file
- Grant maintainership to submitter of the last PR

- Update port to 21.4.17 "Jumbo Shrimp".
- Sync up Motif selection algorithm with xemacs21-mule port.
- Remove GTK support for now, it was commented out and it does not work well.
- General Makefile cleanup
- Unbreak on sparc64

PR:             ports/77291
Submitted by:   Pawel Worach <pawel.worach(at)telia.com>

- Update to 21.4.16
- Fix build on -CURRENT

PR:             ports/75492
Submitted by:   Pawel Worach <pawel.worach(at)telia.com>

It turns out that Andrey Slusar only wants to maintain the xemacs-mule
ports, so make the maintainer ports@.

Use the BZIP2 distribution instead of a whole bunch of tar.gz files [1].

Make Andrey Slusar <anray AT inet DOT ua> the maintainer, since he kindly
volunterred to take over this port from me.

Submitted by: Denis Shaposhnikov <dsh AT vlink DOT ru> [1]

Update to 2.4.15.
Comment out the GTK support since either bsd.gnome.mk is broken or I'm
too stupid to figure it out.

Unbreak port by moving some definitions from the pre-fetch target
to "above it".

Noticed by: nearly everybody.

Add a check for ${X11BASE}/lib/libXm.so so that a dependency can be added
on open-motif.

PR:             ports/62401
Submitted by:   Vivek Khera <khera@kcilink.com>

Port to amd64.

Submitted by:   James Van Artsdalen <james-freebsd-amd64 at jrv.org>, gallatin,
kan

Update to version 21.4.14.

Submitted by: Oliver Banta <obanta@conft.net>

Xemacs seems to be generally broken on sparc64. Add NOT_FOR_ARCHS=sparc64
to the Makefile.

Make portlint(1) happy by changing strip to ${STRIP_CMD}

Submitted by:   Oleg Karachevtsev <ok@etrust.ru>
PR:             56998

After a repo copy from xemacs-devel turn this port into xemacs.

Bump png major    

simple typo fix, remove odd extraneous spaces (^ $)    

Use MASTER_SITE_XEMACS.   Reorder variables to satisfy portlint.    

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

Bump png shared library version.    

Number of commits found: 45

13 vulnerabilities affecting 29 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities