A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 20

o Fix a bug reported by Oleksandr Tymoshenko:
        Due to small issue with gxemul (PCI registers values of piix
        controller are not saved having been written) FreeBSD in
        gxemul panics after detecting IDE devices. Apply this patch to
        fix it...
o Bump PORTREVISION
o Take on this port.

Submitted by:   gonzo@

- Update to version 0.4.6.5

PR:             ports/124587
Submitted by:   KATO Tsuguru <tkato432 AT yahoo.com>

- Update to version 0.4.6.3

PR:             123870
Submitted by:   Ports Fury

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Reset maintainership.

- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Bump PORTREVISION

Approved by:    portmgr (xorg cleanup)

Upgrade to v0.4.6.2.  Changes from the previous ported version include:

- The MIPS32/64 "ror" instruction is now supported.
- Support for NetBSD 4.0, OpenBSD/landisk 4.2.
- Documentation updates.
- Bug fixes.

- Upgrade to v0.4.6.  Upstream changes include:
  - NetBSD/pmppc can now run in the emulator (with root-on-nfs), on
    an emulated Artesyn PM/PPC board.
  - Host CPU usage reductions when the guest OS is in an idle loop.
  - Minor SuperH emulation speed improvements.
  - General code cleanup: Non-working (skeleton) emulation modes have
    been removed, and many unused/legacy constructs have been removed.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Upgrade to v0.4.5.1.  Upstream changes from the previous version
of the port include:
 - Initial support for "disk overlays", enabling rollback of
   emulated disk contents.
 - Bug fixes to dyntrans and other modules.
 - GDB debugging stub support, some dummy and experimentals CPUs
   and machine modes have been removed.
 - Landisk emulation now runs OpenBSD/landisk.

Upgrade to version 0.4.4.  Upstream changes include:
 - a redesign/rewrite of the interrupt routing system.
 - more stable SuperH emulation.
 - minor AltiVec changes.
These changes allow a NetBSD/dreamcast 'Live CD' to boot
and NetBSD/macppc to boot a GENERIC kernel after install.

Upgrade to v0.4.3.  Upstream changes include:
  - SH4 emulation now allows NetBSD/dreamcast to reach
    userland.
  - A framework to let emulated clocks run at same
    speed as the host clock has been added.
  - The built-in debugger's expression syntax has been changed.
  - Better MIPS emulation for some combination of emulated
    processor and guest operating system.
  - Bug fixes.

Add an interim patch that allows FreeBSD to learn the clock frequency
of the emulated MIPS32 processor from yamon's environment.

Submitted by:   bms

Update to v0.4.2.  Upstream changes include:
 - NetWinder emulation mode works well enough to let NetBSD/netwinder
   run from a disk image.
 - Algorithmics P5064 emulation works well enough to let NetBSD/algor
   run from a disk image.
 - PCI configuration register writes are now handled, which allows
   NetBSD/Malta (evbmips) 3.0.1 and NetBSD/cobalt 3.0.1 to run
   from PCI IDE harddisk images.
 - Some performance increases for translation table updates.

Upgrade to v0.4.1.

Major upstream changes from the previous ported version
include:
 - speedups for MIPS emulation,
 - an improved dyntrans backend,
 - tweaks to ARM, PPC, AVR, SPARC and MIPS emulation,
 - support for remote debugging using GDB,
 - a new statistics gathering option "-s",
 - most configuration options are no longer supported,
 - bug fixes.

Port changes:
 - the port no longer depends on GCC >= 3.2 on FreeBSD 4.X.
 - OPTION "X" has been renamed as "X11" for consistency.

- Upgrade to v0.3.8.  User visible changes include:
  - i80321 (XScale) mode can run NetBSD/evbarm,
  - performance speedups for framebuffer output
  - most CPU types are enabled by default.
- Remove obsolete USE_REINPLACE directive.
- Add a local MASTER site.
- Take over port maintainership.

Unbreak: USE_GCC=3.2+ on 4.x

Update to 0.3.7 from 0.3.2.  See
http://gavare.se/gxemul/gxemul-stable/HISTORY.html
for a long changelog between these releases.  Summary: vastly improved arm,
mips and ppc support.  Lots of new CPUs and a better dynamic code generator
for the instructions emulated.  Vastly improved hardware device emulation.
Can boot many free and obscure guest operating systems.

reset maintainer to ports@

Approved by:    maintainer

Add gxemul.

GXemul is a free instruction-level machine emulator, emulating not only the
CPU, but also other hardware components, making it possible to use the emulator
to run unmodified operating systems such as NetBSD, OpenBSD, or Linux.

A few different machine types are emulated. The following machine types are
emulated well enough to run at least one "guest OS":

  * DECstation 5000/200 ("3max"): serial controller (including keyboard and
    mouse), ethernet, SCSI, and graphical framebuffers.
  * Acer Pica-61 (an ARC machine): serial controller, "VGA" text console, and
    SCSI.
  * NEC MobilePro 770, 780, 800, and 880 (HPCmips machines): framebuffer,
    keyboard, and a PCMCIA IDE controller.
  * Cobalt: serial controller and PCI IDE.

WWW: http://gavare.se/gxemul/

PR:             ports/81048
Submitted by:   Janni <jannisan@t-online.de>

Number of commits found: 20

13 vulnerabilities affecting 29 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities