09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:35 Tobias C. Berner (tcberner) 

science/hdf5: bump PORTREVISION of consumers

The SO-version increased in the update to 1.12.2 in
a43418b81530f7e897abfbe18dd59f44265a1a0f .

Reported by:	VVD <vvd@unislabs.com>

    5564b3b

14:21 Tobias C. Berner (tcberner) 

french: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Andreas Fehlner (fehlner@gmx.de)
  *  Dan Phillips <dan-ports@dp.id.au>
  *  Elvis Chiang <elvis@sslab.cs.ccu.edu.tw>
  *  Frederic Culot <frederic@culot.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  janos.mohacsi@bsd.hu
  *  thierry@pompo.net

With hat:	portmgr

    0c7138c

12:50 Po-Chuan Hsieh (sunpoet) 

french/med: Change LIB_DEPENDS from hdf5 to hdf5-110

- Bump PORTREVISION for dependency change

    295de93

15:13 Po-Chuan Hsieh (sunpoet) 

french/med: Fix build with HDF5 1.10.8+

- While I'm here, use sed from basd system instead of gesed from ports

    014002e

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

20:10 thierry 

Upgrade Code_Aster to 14.4.0-1.

PR:		242655

 

20:46 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.

PR:		238330

 

13:16 gerald 

Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.

Suggested by:	tijl

 

01:35 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
   c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.

PR:		231590

 

20:55 thierry 

Upgrade science/hdf5-18 to 1.8.21.

Release notes at:
<https://portal.hdfgroup.org/display/HDF5/Software+Changes+from+Release+to+Release+for+HDF5-1.8#SoftwareChangesfromReleasetoReleaseforHDF5-1.8-Release1.8.21ofMay2018versusRelease1.8.20>

PR:		233071
Submitted by:	wenheping2000 (at) hotmail.com (Original maintainer)

 

08:51 thierry 

Upgrade Code_Aster to 13.6.0-1.

 

22:18 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.

This includes ports
 - featuring USE_GCC=yes or USE_GCC=any,
 - featuring USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and those
 - with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
   c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.

PR:		222542

 

08:34 amdmi3 

- Switch to new test framework
- Switch to options helpers

Approved by:	portmgr blanket

 

17:46 gerald 

Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079).

 

15:55 thierry 

Fix build on head.

Reported by:	packages cluster

 

15:14 thierry 

Upgrade HDF5 to 1.8.20.

Release notes at
https://support.hdfgroup.org/ftp/HDF5/releases/hdf5-1.8/hdf5-1.8.20/src/hdf5-1.8.20-RELEASE.txt

 

18:29 thierry 

Upgrade - endly! - to Code_Aster 13.4.0-3.

Notes:

- I have (not yet) succeeded to enable MFront in this version;

- it uses math/mumps-edf, repocopied from math/mumps;

- cad/scotch is now taken out of the aster tarball;

- french/eficas is no more used: to be replaced by "aster-study" in Salome_Meca
	(the port cad/salome should be resurrected!)

 

20:55 gerald 

Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using Mk/bsd.octave.mk which in turn features USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
   c++14-lang, c++0x, c11, or gcc-c++11-lib.

PR:		219275

 

09:48 thierry 

Upgrade science/hdf5-18 to 1.8.19.

Changelog at
<https://support.hdfgroup.org/HDF5/doc1.8/ADGuide/Changes.html#1819>.

 

15:23 gerald 

Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

This includes ports
 - with USE_GCC=yes or USE_GCC=any,
 - with USES=fortran,
 - using using Mk/bsd.octave.mk which in turn has USES=fortran, and
 - with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
   c++11-lang, c++0x, c11, or gcc-c++11-lib.

PR:		216707

 

13:24 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.

The first part covered  ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.

PR:		214965
Reported by:	thierry

 

12:44 thierry 

Upgrade Code_Aster to 12.0.6-4.

This brings french/eficas to 2016.0.1,
	cad/astk-serveur and astk-client to 1.13.8.2,
	french/med to 3.2.0 (built against hdf5-18),
	bump PORTREVSION to math/metis-edf and fix soname,
	and french/homard to 11.7-1.

 

20:42 sunpoet 

- Update to 1.10.0
- Add LICENSE_FILE
- Remove outdated PORTSCOUT
- Re-enable SZIP option by default: it was changed unintentionally in r398300

Changes:	https://www.hdfgroup.org/ftp/HDF5/releases/hdf5-1.10/hdf5-1.10.0/src/hdf5-1.10.0-RELEASE.txt
		https://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

08:10 sunpoet 

- Update to 1.8.15
- Bump PORTREVISION for science/hdf5 shlib change

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.15-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

22:06 thierry 

Update Code_Aster to 11.7.0-1, with its different tools.

 

10:39 sunpoet 

- Update to 1.8.14
- Update MASTER_SITES
- Use INSTALL_TARGET=install-strip instead of
MAKE_ENV=INSTALL_STRIP_FLAG=${STRIP}
- Bump PORTREVISION for science/hdf5 shlib change

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.14-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

07:58 amdmi3 

- Drop .la files, no dependees require them

Approved by:	portmgr blanket

 

00:55 sunpoet 

- Update to 1.8.12 (from science/hdf5-18)
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Convert to new options helper
- Use NOT_FOR_ARCHS
- Strip shared library
- Remove deprecated PTHREAD_*
- Use MAKE_CMD
- Bump PORTREVISION for science/hdf5 shlib change [1]

Changes:	http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.12-RELEASE.txt
		http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html
Approved by:	portmgr (bapt) [1]

 

13:25 tijl 

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries.  Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field.  In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.

PR:		ports/188759
Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

21:09 thierry 

Upgrade Code_Aster to 11.5.0-4.

N.B.: french/aster is still marked BROKEN, but this allows to unbreak
other ports sharing the same dependencies.

Patch for french/med provided by tijl.

 

20:55 gerald 

Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3.  This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.

Part II, Bump PORTREVISIONs.

PR:		182136
Supported by:	Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by:	bdrewery (two -exp runs)

 

08:50 gahr 

- Convert to USES=tk
- Convert to new LIB_DEPENDS format
- STAGE-clean

 

17:15 tijl 

Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes".  In most cases
USE_GCC=yes has been omitted though.

Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.

Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...

Exp-run:	bdrewery
Approved by:	portmgr (bdrewery)

 

00:52 gerald 

Update to libmpc version 1.0.1 which brings the following fixes:

 - Switched to automake 1.11.6, see CVE-2012-3386.
 - #14669: Fixed extraction of CC from gmp.h.
 - Fixed case of intermediate zero real or imaginary part in mpc_fma,
   found by hydra with GMP_CHECK_RANDOMIZE=1346362345.

This is on top of the following changes from version 1.0

 - Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
   invariant sections) for the documentation.
 - 100% of all lines are covered by tests
 - Renamed functions
   . mpc_mul_2exp to mpc_mul_2ui
   . mpc_div_2exp to mpc_div_2ui
 - 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
 - Removed compatibility with K&R compilers, which was untestable due
   to lack of such compilers.
 - New functions
   . mpc_log10
   . mpc_mul_2si, mpc_div_2si
 - Speed-ups
   . mpc_fma
 - Bug fixes
   . mpc_div and mpc_norm now return a value indicating the effective
     rounding direction, as the other functions.
   . mpc_mul, mpc_sqr and mpc_norm now return correct results even if
     there are over- or underflows during the computation.
   . mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
     infinite part and equals output variable is corrected.
   . mpc_fr_sub: Wrong return value for imaginary part is corrected.

Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.

Bump PORTREVISIONS of all dependent ports.

PR:		183141
Approved by:	portmgr (bdrewery)

 

17:21 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
french)

 

17:58 thierry 

Fix plist.

Reported by:	miwi

 

20:33 thierry 

Upgrade to 3.0.6.

 

15:15 thierry 

Upgrade Code_Aster to 10.6.0-3.

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:00 sunpoet 

- Bump PORTREVISION for science/hdf5-18 shlib change

10:23 thierry 

Chase the upgrade of science/cgnslib to 2.5-5; this implies to
switch some dependencies from science/hdf5 to science/hdf5-18.

As a side note: I think that all ports depending on science/hdf5
could be switched to science/hdf5-18, by defining H5_USE_16_API
when necessary, and then science/hdf5 could be deprecated.

PR:             ports/154736

07:34 ade 

Sync to new bsd.autotools.mk

11:52 ade 

Punt autoconf267->autoconf268

21:23 thierry 

Chase Code_Aster's upgrade and depends on Tcl/Tk 8.5.

18:35 ade 

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

15:08 thierry 

Fix plist when NOPORTEXAMPLES is defined.

Feature safe:   yes

18:30 thierry 

Upgrade to 2.3.6.

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

18:29 thierry 

Chase Aster's main tarball. No change.

20:25 thierry 

- Upgrade to 2.3.5;

- Use aster's distfiles.

13:04 amdmi3 

- Respect NOPORTDOCS, NOPORTEXAMPLES
- Fix plist

Reported by:    QAT

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

00:57 ade 

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

20:50 thierry 

Upgrade to 2.3.4.

10:15 thierry 

Upgrade to 2.3.3.

04:47 linimon 

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

10:02 maho 

Now we use USE_FORTRAN=yes to use FORTRAN compiler.

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

22:33 thierry 

Fix plist: since the gfortran migration, some tests are no more installed.

Reported by:    pointyhat via pav

06:06 maho 

* Migrate to gfortran.
* Bump port revision.
* Always use F90.

18:24 thierry 

- Upgrade MED to 2.3.1;

- Assign better CATEGORIES;

- Support gfortran;

- Add a regression-test target.

23:06 clsung 

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

13:33 sat 

- Limit INDEX contents to 7-bit ASCII characters for greater compatibility

11:09 edwin 

Remove USE_REINPLACE from all categories starting with F

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

09:01 thierry 

- Fix plist [1]

- Fix xmdump.

Reported by:    pointyhat via Kris [1]

23:15 thierry 

Upgrade to 2.2.3.

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

21:08 thierry 

Upgrade to 2.2.2.

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

20:30 thierry 

Fix pkg-plist and install examples.
Noticed on dosirak & bento.

Approved by:    mat (mentor).

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

22:55 pav 

Chase repomove graphics/hdf* -> science/hdf*

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

23:09 pav 

- www.code-aster.org was reorganized. fix fetching

PR:             ports/60121
Submitted by:   Thierry Thomas <thierry@pompo.net>

14:35 oliver 

Add med 2.1.5, mod?lisation et ?changes de Donn?es.

PR:             54761
Submitted by:   thierry@pompo.net