06:45 Li-Wen Hsu (lwhsu) 

ftp/py-pyftpdlib: Update to 1.5.9

    c44cfdf

19:34 Rene Ladan (rene) 

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

    3d9a815

15:58 Dmitry Marakasov (amdmi3) 

*/*: rename CHEESESHOP to PYPI in MASTER_SITES

PR:			267994
Differential revision:	D37518
Approved by:		bapt

    77d6847

12:54 Li-Wen Hsu (lwhsu) 

ftp/py-pyftpdlib: Update to 1.5.7

    5885369

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

23:02 antoine 

Drop python 2.7 support from a few ports

With hat:	portmgr

 

10:16 lwhsu 

- Update to 1.5.6

 

14:03 lwhsu 

- Update to 1.5.5

 

13:15 mat 

Add EXAMPLES options to ports that should have one.

Also various fixes related to said option.

PR:		230864
Submitted by:	mat
exp-runs by:	antoine

 

17:05 mat 

Use PY_FLAVOR for dependencies.

FLAVOR is the current port's flavor, it should not be used outside of
this scope.

Sponsored by:	Absolight

 

13:00 lwhsu 

- Update to 1.5.4

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

09:17 lwhsu 

- Update to 1.5.3

 

06:17 miwi 

- Fix shebangs

 

08:47 lwhsu 

- Update to 1.5.2

 

12:03 lwhsu 

- Update to 1.5.1

 

16:00 mat 

Mark the remaining ports depending on Google Code as DEPRECATED, with an
EXPIRATION_DATE at the end of April 2017.

In the past six months, about a third of the ports marked BROKEN because
they were hosted on Google Code have been fixed.  The remaining must not
be of use to anyone.

With hat:	portmgr
Sponsored by:	Absolight

 

15:59 mat 

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

14:20 mat 

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

 

17:18 mva 

- Convert ports from french/ and ftp/ to new USES=python

Approved by:	portmgr (implicit)

 

18:18 adamw 

Resolve unnecessary bsd.port.options.mk inclusion by using OPTIONS helpers.

Approved by:	portmgr (blanket)

 

06:20 lwhsu 

- Stage
- Drop easy_install
- Pet portlint

PR:		ports/188881
Submitted by:	Bartek Rutkowski <ports@robakdesign.com>

 

21:00 rene 

Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by:	python (mva, rm)
Approved by:	portmgr-lurkers (mat)

 

17:23 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
ftp)

 

14:04 lwhsu 

- Tweak USE_PYTHON to -2.7 to match upstream compatibility
- Switch from distutils to easy_install (update pkg_plist to suit)
- Add OptionsNG for SENDFILE and OPENSSL support
- Add test: target to run unit tests
- Patch: setup.py
  - Add zip_safe=False to install egg uncompressed
  - Add test_suite for running unit tests via setup.py
- Patch: test/test_*
  - add path hacks to test WRKSRC sources

PR:		ports/171682
Submitted by:	Kubilay Kocak <koobs.freebsd@gmail.com>

 

17:57 lwhsu 

- Update to 0.7.0
- Remove LICENSE_FILE for well-known licenses
- Remove DOCSDIR and NOPORTDOCS checks - Not bundled by upstream anymore
- Update and sort pkg-plist

PR:             ports/169102
Submitted by:   koobs <koobs.freebsd@gmail.com>

13:12 lwhsu 

- Update to 0.6.0
- Add license

PR:             ports/155290
Submitted by:   Ruslan Mahmatkhanov <cvs-src AT yandex.ru>

11:46 lwhsu 

- Update to 0.5.2

08:02 lwhsu 

- Update to 0.5.1

03:35 lwhsu 

- Update to 0.5.0

PR:             ports/127556
Submitted by:   Wen Heping <wenheping AT gmail.com>

02:15 lwhsu 

- Update to 0.4.0

22:19 edwin 

Use ${MASTER_SITE_GOOGLE_CODE} instead of
http://something.googlecode.com/files

PR:             ports/121435 (related)

12:11 lwhsu 

- Update to 0.3.0

01:23 lwhsu 

- Update to 0.2.0

11:41 gabor 

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

06:23 lwhsu 

- Respect NOPORTEXAMPLES

08:49 lwhsu 

- Change to my FreeBSD.org email

Approved by:     clsung (mentor)

13:29 miwi 

- Update to 0.1.1

PR:             110032
Submitted by:   Li-Wen Hsu <lwhsu@lwhsu.org> (maintainer)

20:12 miwi 

Python FTP server library provides an high-level portable interface to easily
write asynchronous FTP servers with Python. Based on asyncore / asynchat
frameworks pyftpdlib is actually the most complete RFC959 FTP server
implementation available for Python language.

WWW:    http://billiejoex.altervista.org/pyftpdlib.html

PR:             ports/109934
Submitted by:   Li-Wen Hsu <lwhsu at lwhsu.org>