17:58 Muhammad Moinur Rahman (bofh) 

ftp/quftp: Moved man to share/man

Approved by:    portmgr (blanket)

    c43341d

22:11 Rodrigo Osorio (rodrigo) 

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart

    05f0f44

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:21 Tobias C. Berner (tcberner) 

ftp: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Alexander Kriventsov
  *  Anders Nordby <anders@fix.no>
  *  Andreas Fehlner <fehlner@gmx.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Damjan Marion <dmarion@open.hr>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Frank DENIS
  *  Frank Laszlo <laszlof@vonostingroup.com>
  *  Gea-Suan Lin (gslin@ccca.nctu.edu.tw)
  *  Gea-Suan Lin <gslin@ccca.nctu.edu.tw>
  *  George V. Neville-Neil <gnn@FreeBSD.org>
  *  Hye-Shik Chang
  *  Jordan Hubbard <jkh@FreeBSD.org>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Joseph Benden <joe@thrallingpenguin.com>
  *  Ju Pengfei <jupengfei@gmail.com>
  *  Jui-Nan Lin <jnlin@freebsd.cs.nctu.edu.tw>
  *  Mark Johnston <markj@FreeBSD.org>
  *  Martin Matuska (mm@FreeBSD.org)
  *  Marwan BURELLE <marwan.burelle@lri.fr>
  *  Maxim Ignatenko
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Neil Blakey-Milner
  *  Neil Blakey-Milner <nbm@rucus.ru.ac.za>
  *  Nick Leuta
  *  Nosov Artem <chip-set@mail.ru>
  *  Petr Holub <hopet@ics.muni.cz>
  *  Philippe Le Berre <philippe@le-berre.com>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Roman Bogorodskiy
  *  Sergey Matveychuk <sem@FreeBSD.org>
  *  Sergey Skvortsov <skv@FreeBSD.org>
  *  Stephane Legrand
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Tom McLaughlin <tmclaugh@sdf.lonestar.org>
  *  Tomokazu ISHII <t-ishii@tryplanet.com>
  *  Ulrich Spoerlein <uspoerlein@gmail.com>
  *  Wen Heping <wen@FreeBSD.org>
  *  Xavier Beaudouin <kiwi@oav.net>
  *  Yasuhiro Fukuma <yasuf@big.or.jp>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  ache
  *  cy@FreeBSD.org
  *  ijliao
  *  ports
  *  torstenb
  *  will

With hat:	portmgr

    30cd242

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

14:04 sunpoet 

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

 

13:46 sunpoet 

Update devel/readline to 7.0 patch 3

- Bump PORTREVISION for shlib change

Changes:	https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
		https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
		https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision:	https://reviews.freebsd.org/D11172
PR:		219947
Exp-run by:	antoine

 

18:19 marino 

4 ports categories: Remove $PTHREAD_LIBS

Categories: www, ftp, net-im, net-mgmt

approved by:	PTHREAD blanket

 

20:50 adamw 

Fix build on -current.

 

13:48 danilo 

- Add stage support
- Remove the indefinte article from COMMENT

 

17:23 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
ftp)

 

22:35 ak 

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

 

15:34 bapt 

Convert USE_NCURSES by USES=ncurses
Convert USE_READLINE by USES=readline

 

02:35 araujo 

- Support USE_READLINE.
- Add MAKE_JOBS_SAFE.
- Set CPPFLAGS and LDFLAGS in a proper way.
- Bump PORTREVISION.

PR:		ports/172000
Submitted by:	KATO Tsuguru <tkato432@yahoo.com>

 

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

00:20 amdmi3 

- Switch SourceForge ports to the new File Release System: categories starting
with E,F

11:28 itetcu 

Fix LIB_DEPENDS on devel/readline: its sh lib version was bumped recently from
5 to 6.

Forgotten by:   araujo@
Reported by:    QAT

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

09:18 linimon 

Return laszlof's ports to the pool due to lack of time.

Hat:            portmgr

15:37 laszlof 

Update my email address in all ports that I maintain.

Approved by:    flz (mentor)

11:09 edwin 

Remove USE_REINPLACE from all categories starting with F

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

11:27 kwm 

Fix build on sparc64.

PR:             73979
Submitted by:   maintainer

00:04 will 

Chase readline library depend bump.  Portlint.

PR:             72749
Submitted by:   maintainer

14:28 vs 

Fix build

Approved by: maintainer

13:12 trevor 

Use PLIST_FILES (bento-tested, marcus-reviewed).

10:42 edwin 

New Port: quftp-1.0.7

        New port for quftp, a scriptable ftp client.

PR:             ports/60164
Submitted by:   Frank J. Laszlo <laszlof@vonostingroup.com>