Number of commits found: 57

- Update to 0.7.0

PR:             165002
Submitted by:   Ports Fury

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Sync to new bsd.autotools.mk

- Update to 0.6.3

PR:             148557
Submitted by:   Ports Fury

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Introduce USE_OPENAL variable for OpenAL consumers
- Switch to openal-soft as a default OpenAL implementation

PR:             ports/142123
Submitted by:   mva
Tested by:      pointyhat exp-run
Approved by:    portmgr (hat)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- Update to 0.6.2

PR:             135641
Submitted by:   Ports Fury

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

- Update 0.6.1.

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 0.6.0

PR:             121087
Submitted by:   Ports Fury

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 0.5.7

PR:             ports/113772
Submitted by:   Ports Fury

- Update to 0.5.6

PR:             113006
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove FreeBSD 4.X support from unmaintained ports in categories starting
  with letter f-h

Use libtool port instead of included version to avoid objformat a.out botch

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

Chase the plib update by bumping PORTREVISION, since it is statically
linked in.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

- Update to 0.5.5

PR:             ports/88344
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to 0.5.4

PR:             82939
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 0.5.3

PR:             ports/77136
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

If imake is not present at build time, configure gets confused about
location of X11 libraries and headers, so tell it where they are.

Pointed out by: dosirak via kris, while testing X.Org upgrade

Update to version 0.5.2

PR:             ports/73906
Submitted by:   Ports Fury

Mark as BROKEN on 4.x

PR:             ports/68379
Submitted by:   Ports Fury

Update to 0.5.0.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

This port now seems to compile on 5.x

BROKEN on 5.x: Does not compile

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

- Update to version 0.4.4

PR:             ports/61954
Submitted by:   Ports Fury

KATO-san notes that this port has been updated since I started
on my project to mark ports broken on 5.x.  I thought I had
cvsupped ports on my build test box, but it looks like not.  My
apologies to KATO-san ...

Per bento logs, mark as broken on recent 5.x versions.

- Update to version 0.4.3

PR:             60339
Submitted by:   Ports Fury

- Update to version 0.4.2

PR:             59126
Submitted by:   Ports Fury

- Update to version 0.4.1

PR:             57533
Submitted by:   Ports Fury

- Fix build on bento

Submitted by:   Mark Linimon, Ports Fury

- Fix build

Submitted by:   kris via bento

- Update to version 0.4.0

PR:             56320
Submitted by:   Ports Fury

Fix build on -current

PR:             54801
Submitted by:   KATO Tsuguru <tkato@prontomail.com>
Approved by:    fjoe (mentor) (implicit)

Update to 0.3.3

PR:             53389
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.3.2

PR:             52695
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 0.3.1

PR:             porst/51052
Submitted by:   Ports Fury

De-pkg-comment.

Update to version 0.2.4

PR: 42240
Submitted by: Ports Fury

Update to 0.2.3

PR:             40243
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

- GNU_CONFIGURE -> USE_LIBTOOL

PR:             38997
Submitted by:   Ports Fury

upgrade to 0.2.2

add vamos 0.1.11
An automotive simulation framework

Number of commits found: 57

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities