Number of commits found: 75

- Update to 6.4.3-4

- Update to 6.4.2-7

- Update to 6.4.2-5

- Update to 6.4.1-8

- Update to 6.4.1-5 [1]
- Remove ALL_TARGET from Makefile [2]

PR:             ports/124171 [2]
Submitted by:   mm [1], Adam McDougall <mcdouga9@egr.msu.edu> [2]

- Update to 6.4.1-3

- Update to 6.4.1-1

- Update to 6.4.1-0

- change distfile to .bz2
- take maintainership (mm)

The 6.4.0-11 was rerolled under the same name. ImageMagick admitted the
mistake, but would not correct it:

http://www.imagemagick.org/discourse-server/viewtopic.php?f=3&t=11147

register the new size and checksums in distinfo, and adjust pkg-plist
for this new release. Bump PORTREVISION to signify it...

Update from 6.4.0-7 to 6.4.0-11. Some minor problems should be fixed by
the vendor. For the port the important changes are:

        * parallel building is back
        * p7zip is now used to extract the distfile -- lzma used earlier
          caused problems, because two different lzma-archivers exist
          (conflicting ports). p7zip is also wider known and supports
          more compression methods.

The p7zip-part was
Submitted by:    Neil Darlow

Upgrade to 6.4.0-7 -- currently the latest.

Notable changes:

        1. Pick the .lzma version of the vendor's distfile. Although
           adds archivers/lzma to EXTRACT_DEPENDS, the savings make
           it worth the trouble.
        2. Disable parallel build, until the vendor figures out, what
           broke it.
        3. Disable use of our libtool -- somehow that does not work
           any more. It would be nice, if our libtool-maintainers could
           look into it -- just uncomment the relevant line in the new
           Makefile and attempt building.
        4. Most of the things are now installed into "versioned" directories:
           "ImageMagick-6.4.0" instead of "ImageMagick".
        5. API-headers now go into ${PREFIX}/include/ImageMagick instead of
           directly into ${PREFIX}/include. This will make co-existence with
           GraphicsMagick much easier.

Update from 6.3.5-10 to 6.3.6-9. Some of our patches were accepted
upstream. The tests should work with and without X11. Enable FPX by
default. Resolve all related PRs.

Approved by:    portmgr (linimon)
PR:     67815
PR:     117635
PR:     116874
PR:     114387

Upgrade from 6.3.3-5 to 6.3.5-10 -- the latest available. Take over
maintainership -- with the previous maintainer's approval.

Remove explicit requirements for shared library major numbers of
dependencies. Like in almost all other ports, these quite gratuitous.

Scale the build to multiple CPUs, if available on the building
system.

Automatically run vendor's self-tests (unless disabled via OPTIONS).

Apply DOS2UNIX to a number of files including the HTML pages.

NB: ImageMagick's configure tries to detect an OpenMP-capable compiler.
This /may/ be a problem, when gcc-4.2 (such as on 7.x) or greater is
used... An explicit `--disable-openmp' may be needed...

- Update to 6.3.3-5 [1]
- SVG support requires X11 support, so mark as IGNORE if WITHOUT_X11
  is defined [2]
- Correct set CPPFLAGS for fontconfig, librsvg, and graphviz [3]

PR:             ports/109862 [2], ports/110141[3]
Submitted by:   rafan [1], chinsan [2], Maxim Samsonov <xors at mne.ru> [3]
Approved by:    shuan

Upgrade to 6.3.2-0.

- Update to 6.2.9.8

PR:             ports/104020
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.2.9.3

PR:             ports/102817
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

Upgrade to 6.2.8-5

Submitted by:   maintainer

- Update to 6.2.7.7
- portlint(1)

PR:             96747
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet___sunpoet.net>
Approved by:    maintainer timeout (20 days)

SHA256ify

Approved by: krion@

[patch] ImageMagick segfaults, port update to 6.2.5-5 solves problem

        Using 'convert' utility, even on basic operations causes
        job to be done, but command exits via receiveing SEGFAULT
        signal.

        Using new version of ImageMagick (6.2.5-5), convert utility
        works as expected.

        This problem also applies to pecl-imagick.  And of course
        is also solved by this port update

        /etc/make.cof is empty during port install

Also included an update to libMagick.so.9!

Submitted by:   Piotr Rybicki <meritus@innervision.pl>
Approved by:    Arjan van Leeuwen <avleeuwen@piwebs.com>
PR:             ports/91270

- Update to 6.2.2.1

PR:             ports/80501
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>
Approved by:    Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.2.0-5
- fixes a security vulnerability
  Reported by:  simon
  Security:    
http://vuxml.freebsd.org/713c3913-8c2b-11d9-b58c-0001020eed82.html
- change logic in WITH_WMF/WITHOUT_WMF because of dependencies on X11 and
ImageMagick modules
  Reported by:  Joan Picanyol i Puig <lists-freebsd@biaix.org>

PR:             ports/78454
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

Update from 6.1.9-2 to 6.1.9-4 and re-enable the FPX support. The vendor
flipped the `--without-fpx' into `--with-fpx' some time ago, but we did
not notice.

- Update to 6.1.9.2

PR:             ports/76479
Submitted by:   Gerald <gcoon@inch.com>
Approved by:    maintainer (illness)

Update Imagemagick to lastest version

Submitted by:   maintainer
Approved by:    pav

- Update to 6.1.6.7
- Fix WITH_IMAGEMAGICK_THREADS knob

PR:             ports/75065
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.1.6.6

PR:             ports/74997
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.1.6.4

PR:             ports/74955
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.1.6.3
- Add fruitsalad.org mirror to prevent fetch problems in case ImageMagick
  decides to update again
- Don't install/append to perllocal.pod [1]

PR:             ports/74928
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
Reported by:    pointyhat via kris [1]

Update ImageMagick to 6.1.6-0.
This fixes vulnerability as documented in
http://www.vuxml.org/freebsd/eeb1c128-33e7-11d9-a9e7-0001020eed82.html

Submitted by:   maintainer
PR:             ports/74487
Approved by:    mat

Update to 6.0.6.2.

PR              ports/71024
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)
Pointed out by: pav

Update to 6.0.5.3.
o Adios --enable-lzh. This was obsoleted from 6.0.3-3 or above. [1]
o Utilize libtool15.

Pointed out by: sf [1]
Approved by:    Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

Update to 6.0.2.7

PR:             ports/68257
Submitted by:   maintainer

- Update to 6.0.2.6 [1]
- Simplify plist [2]
- Reflect new mpeg2 dependency [3]

PR:             ports/67671 [3], ports/67861 [1,2]
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer) [1],
                michael johnson <ahze@ahze.net> [2],
                edwin [3]
Approved by:    maintainer

- Unbreak checksum by updating to 6.0.2.1

PR:             ports/67663
Submitted by:   Toni Viemero <toni.viemero@iki.fi>

- Update to 6.0.2

PR:             ports/67628
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (maintainer)

- Update to 6.0.1

  For what's new in 6.0 please read
  http://www.imagemagick.org/www/News.html

Closer investigation shows, that ImageMagick stopped supporting HDF
format on or before July 2002:

       
http://studio.imagemagick.org/pipermail/magick-users/2002-July/003703.html

Indeed, the HDF bits are commented out in the package's
configure/autoconf and none of the utilities installed by the port
actually link with HDF.

Rather than bump PORTREVISION, upgrade to the 5.5.7.16 (from .15).

Prompted by: troubles with HDF and amd64

SIZEify.

Update to 5.5.7-15.

Upgrade from 5.5.7-11 to yesterday's 5.5.7-14. Nothing to see here...

Update to 5.5.7-11. [1]
o Removed two (now obsolate) libtool version patches
  as ImageMagick now uses internal version system for
  them starting from 0:0:0 (5.5.8 will become 0:1:0),
  also MAJOR_VERSION/MINOR_VERSION/MICRO_VERSION
  variables removed from the source.
o Removed two other patches as now they are already
  embedded to the source.
o Updated plist to reflect separate Q8/Q16 folder
  installations based on selection while installing.
  Also Makefile modifed to reflect this.

Minor cleanup MASTER_SITES.
Utilize PLIST_SUB from post-install:

PR:             ports/55274 (Update to 5.5.7-10) [1]
Submitted by:   Erdener Gonenc <ergonenc@artemis.efes.net> [1]
Reviewed by:    Rob Lahaye <lahaye@snu.ac.kr>

Back out to 5.5.6.

Submitted by:   marcus (portmgr)

Update to 5.5.7-10. [1]
o Removed two (now obsolate) libtool version patches
  as ImageMagick now uses internal version system for
  them starting from 0:0:0 (5.5.8 will become 0:1:0),
  also MAJOR_VERSION/MINOR_VERSION/MICRO_VERSION
  variables removed from the source.
o Removed two other patches as now they are already
  embedded to the source.
o Updated plist to reflect separate Q8/Q16 folder
  installations based on selection while installing.
  Also Makefile modifed to reflect this.

PR:             ports/55274 [1]
Submitted by:   Erdener Gonenc <ergonenc@artemis.efes.net> [1]
Pointed out by: Rob Lahaye <lahaye@snu.ac.kr>

Update to version 5.5.6;
Pass more sane arguments to libtool's -version-info option.

Update to version 5.5.5.

o Update to 5.5.1.4
o Remove VERSION number from both directory and library names (e.g.,
  libMagick++-5.5.1.so becomes libMagick++.so)
o Add a library version number back; thus, fixing library dependencies
  which require this port to have a library version number. Current
  number is 5 (e.g., libMagick++.so.5)
o Update PLIST accordingly

My last commit, intended to fix -current, did not do so, and broke
-stable :-( Upgrade the port to the latest to compensate.

The port now installs things in version specific directories, so
add the version number to PLIST_SUB.

Remove USE_REINPLACE -- the port uses PERL anyway.

As usual, the hardest thing to do is to fix the pkg-plist.

upgrade to 5.3.8-3

PR:             42736
Submitted by:   Ports Fury

Another micro-upgrade -- to 5.4.7-4

Update to 5.4.7-1

PR:             39989, 40270
Submitted by:   KATO Tsuguru <tkato@prontomail.com>,
                Guilherme J. R. Oliveira <guilherme@nortenet.pt>
Reviewed by:    Cyrille Lefevre <cyrille.lefevre@laposte.net>
Prompted by:    many in FreeBSD-ports mailing list

o Update to 5.4.6.2
o Fix configure issue

PR:             39680
Submitted by:   Oliver Lehmann <lehmann@ans-netz.de>
Prompted by:    Stephen Montgomery-Smith <stephen@math.missouri.edu>,
                too many

Upgrade to 5.4.6.1

Update to 5.4.5.1. I tested it on -stable, but it wouldn't build on
my current machine -- because the C++ is busted on it :-\

Update to 5.4.4.5

PR:             37685
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 5.4.4

- Update to 5.4.3.11   - Dont remove .la files    

- Update to 5.4.3.10   - Remove .la files (requested by mi)    

Update to 5.4.3.9. Obey DOCSDIR and NOPORTDOCS. Fix some warnings --   time_t is
rather int than long.    

Update to 5.4.3-6 -- released today :-) One more include file installed,   and a
few more files of documentation.    

Update to 5.4.3.5    

Update to 5.4.3.4    

Update to 5.4.1.2    

Update to 5.4.0.5    

update to 5.3.8.2.    

Update to version 5.3.7.    

Update to 5.3.6    

o Update port to version 5.3.5   o Update MASTER_SITES definitly removing
SOURCEFORGE    

Update to 5.3.4.    

Upgrade to version 5.3.1 .    

o drop non-responsive maintainer. jseger nothing commits last 6 months.   o
update to 5.2.9.    

Bump PORTREVISION I forget   Checksum changed (on the file we not use)    

Update to version 5.2.7.    

Number of commits found: 75

9 vulnerabilities affecting 12 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities