A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 38

Add XCB support with optional. Enable it by default, since future version of
x11-wm/awesome needs it. Bump the PORTREVISION.

PR:             ports/126993
Submitted by:   bf <bf2006a@yahoo.com>
Requested by:   Nikos Ntarmos <ntarmos@ceid.upatras.gr>

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

(Only the first 15 lines of the commit message are shown above )

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Downgrade cairo back to 1.4.14.  It has been reported that 1.5 was causing
redraw performance problems for some users.  The hope was that 1.6 would
have been ready for GNOME 2.22, but this did not happen.  Cairo 1.6 will
be imported with GNOME 2.24.

Discussed with: ahze

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Add a backup MASTER_SITE for cairo.

Requested by:   pav

Update to 1.4.14.

Update to 1.4.12.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

(Only the first 15 lines of the commit message are shown above )

Update to 1.4.10

Add a patch from Freedesktop git to fix a crash with OpenOffice
applications.

Obtained from:  Freedesktop git

Update to 1.4.8

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update to 1.4.6.

Update to 1.4.4.

Update to 1.4.2

Presenting GNOME 2.18 for FreeBSD.  GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features.  Not that it doesn't have its share of new and exciting
items.  See http://www.gnome.org/start/2.18/ for all the goodies in
this release.

GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.

Pass PTHREAD_LIBS in pkgconfig files

Update to 1.2.6

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

(Only the first 15 lines of the commit message are shown above )

- Add header in these *-reference ports.
- Fix a few of pkg-descr by chase the rename.
- Move all PORTREVISION and PORTEPOCH to top with ?=.
- Put USE_X_PREFIX back in, but under REFERENCE_PORT, and remove PREFIX? and
  USE_XLIB. This fix ports to use the correct mtree when you change the prefix,
  for example:

        Incorrect: (Without USE_X_PREFIX)
        ================================
        # cd /usr/ports/x11-toolkits/gtk20
        # make -V MTREE_FILE
        /etc/mtree/BSD.x11-4.dist
        # make PREFIX=/tmp/foo -V MTREE_FILE
        /etc/mtree/BSD.local.dist <-- Here...
        ================================

(Only the first 15 lines of the commit message are shown above )

Move the cairo programming reference to the cairo-reference port.

- Update to 1.0.4
- Add MASTER_SITE_LOCAL because cairographics.org is sllooowww

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Treat xorg-server-snap as a broken X.org version with respect to surface
  repeating. This fixes the wallpaper corruption in Nautilus.

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

(Only the first 15 lines of the commit message are shown above )

- Remove two patch that were needed for a cvs snapshot we had on marcuscom cvs
  to fix build with XFree86

PR:             ports/78668
Submitted by:   vs

Unbreak WITHOUT_X11

- Update to 0.4.0

Fix bogus CONFIGURE_ENV: PTHREAD_CLFAGS & _LDFLAGS don't exist

Transfer MAINTAINER to gnome@FreeBSD.org

- Take "Cairo is" out of beginning of COMMENT

PR:             ports/78006
Submitted by:   danfe

Move bsd.port.pre.mk up a few lines so it works with WITH_GLITZ

Pointed out by: adamw

- Update to 0.3.0
- Add WITHOUT_GLITZ OPTION [1]
- Add WITHOUT_X11 knob

Requested by:   debugger via irc [1]

Temporarily remove cairographics.org from MASTER_SITES since the distfile either
does not exist or md5 does not match what is in distinfo

Add MASTER_SITE_LOCAL to MASTER_SITES until
freedesktop.org is back in order

Approved by:    adamw (implicit)

Update to 0.2.0 to fix fetch

Pointed out by: pointyhat via kris
Approved by:    marcus (co mentor)

add cairo

Cairo is a vector graphics library with cross-device output
support. Currently supported output targets include the X Window
System and in-memory image buffers. PostScript and PDF file output is
planned. Cairo is designed to produce identical output on all output
media while taking advantage of display hardware acceleration when
available (eg. through the X Render Extension).

PR:             ports/72407
Approved by:    adamw (mentor)

Number of commits found: 38

14 vulnerabilities affecting 30 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities