A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 47

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

(Only the first 15 lines of the commit message are shown above )

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Chase ImageMagick library version change, bump the PORTREVISION.

PR:             ports/122947
Submitted by:   Dominic Fandrey <kamikaze@bsdforen.de>

-Update to 0.46. [1]
-Remove USE_GCC=3.4+ and X11BASE.

PR:             ports/122386 [1]
Submitted by:   Robert Andersson <streambag@streambag.se> [1]

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Set USE_PERL5/WANT_PERL as appropriate, for ports that either depend on
perl unconditonally, or conditionally.  To be able to conditionalize the
inclusion of bsd.perl.mk, they now need to be defined before the inclusion
of bsd.port.pre.mk.

Hat:            portmgr

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Update to 0.45.1.

Allow these ports to be built with GCC 4.2.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

-Remove check on FreeBSD 4.x.
-Portlint:
        *Use MAN1_EN and MANLANG.
        *Use DATADIR in plist.

Add missing dependency on desktopfileutils.

Reported by:    krismail

- Remove gnomeprefix.
  Inkscape is not GNOME application. This also fixes broken locale
  initialization. [1]
- Remove USE_X_PREFIX.

Reported by:    Andrew Muhametshin <andrew@dobrohot.org> [1]

Manually remove extra locale directory.

Reported by:    krismail

Update to 0.45

PR:     108952

Update to 0.44.1.

Add a missing dependency on lcms.

Update to 0.44.  This version required a log2 implementation which was
taken from standards/83845.

- Rename ports

  textproc/gtkspell2 -> textproc/gtkspell
  textproc/gtkspell2-reference -> textproc/gtkspell-reference

portlint:
        -Use lowercase letter in the begin of IGNORE.

Add USE_GETTEXT to appease portlint.

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

The configure script checks for libgnomeprintui, not libgnomeprint. Therefore,
I'm changing the dependency from libgnomeprint to libgnomeprintui. PORTREVISION
bump JIC.

- Update to 0.43
- Make GNOME dependency optional.
- Use bzip2 distfile.
- Add SHA256 checksum.

Switch to <target>:: convention for both patch-autotools and run-autotools,
to allow for easier overriding of these targets by port Makefiles, if
they need to.

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

Update to 0.42.2

IGNORE this port on 4.X due to missing symbols.

Update to 0.42.

Fully-qualify the path to update-desktop-database and update-mime-database in
the plist since /usr/local/bin isn't in pkg_add's PATH. Bump the PORTREVISION.

Update to 0.41.

Bump PORTREVISIONS for all ports that depend on atk or pango to ease in the
big upgrade.

Add support for the new GNOME MIME system.

Fix crasher bug. There is a problem in inkscape provoked by
sp_object_invoke_write() call wich result in bunch on gtk signals
emission wich in turn may release parent knot holder object beeng
modified. Current fix is not correct way to resolve the situation but
it let us safely go.

- Update to 0.38.1
- Workaround internal compiller error on -STABLE [1]
- More build patches incl. fix for build with antiqe STL on -STABLE

Reported by:    Lee Harr <missive@hotmail.com> [1]

Update to 0.38

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add libsigc++ dependency.

Submitted by:   Franz Klammer <klammer@webonaut.com>

Update to 0.37

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Fix p5-XML-XQL run-time dependency.

Reported by:    Jeremy Messenger <mezz7@cox.net>

- Enable GNOME printing support.
- Fix PLIST.

Update to 0.36

Add inkscape 0.35, a program seeks to become a full featured open
source SVG editor.

Number of commits found: 47

19 vulnerabilities affecting 36 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities