19:23 tijl 

- Replace Mk/bsd.linux-apps.mk and Mk/bsd.linux-rpm.mk with
  Mk/Uses/linux.mk.
- Replace USE_LINUX=yes with USES+=linux and USE_LINUX=(.*) with
  USES+=linux:\1 in all ports.
- Replace USE_LINUX_APPS with USE_LINUX in all ports.
- Use INSTALL_SCRIPT instead of INSTALL_PROGRAM to install scripts in some
  ports.
- When USE_LINUX_RPM is defined, simplify the way DISTFILES and EXTRACT_ONLY
  are defined.
- Remove BRANDELF_DIRS and BRANDELF_FILES handling.  In the very rare cases
  that it is still necessary ports can run ${BRANDELF} from post-patch.
- Remove AUTOMATIC_PLIST handling.  Only one port used it.
- Fix Linux MASTER_SITES.
- Replace OVERRIDE_LINUX_BASE_PORT and OVERRIDE_LINUX_NONBASE_PORTS with
  default versions framework.
- bsd.port.mk:
  - Move Linux related bits to Uses/linux.mk, except USE_LINUX_PREFIX.
  - Put USE_LINUX_PREFIX handling after USES processing.
  - Define DOCSDIR, DATADIR, etc. after handling USE_LINUX_PREFIX so it can
    give these variables a different default value.
  - When a package needs to run Linux ldconfig check before installation if
    Linux support is enabled.
- emulators/linux_base-*:
  - Use USES=linux and remove duplication.
  - Remove files/lp.  FreeBSD or CUPS lp(1) should work.
  - Remove files/yp.conf.  No longer seems to be used.
  - Remove pkg-deinstall and move pkg-install into pkg-plist.
  - Update pkg-descr and pkg-message.
  - Fix handling of ldconfig cache in pkg-plist.
- devel/fb-adb: Use a Linux shell to run a Linux script but patch the script
  to use FreeBSD mkdir so mkdir -p $path creates $path and not
  /compat/linux/$path.

PR:		211645
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

09:48 tz 

Change all occurrences of xmj@chaot.net to johannes@perceivon.net as the owner
requested.

This only affects "Created by" lines with one exception: devel/uclcmd. There the
maintainer is changed. This was overlooked in r416918.

Approved by: junovitch (mentor)

 

17:13 tijl 

Update Linux ports to Centos 6.8.

PR:		210373
Submitted by:	Piotr Kubaj <pkubaj@anongoth.pl>
Differential Revision:	https://reviews.freebsd.org/D6891

 

18:30 miwi 

Welcome Centos 6.7

- Upgrade all linux-c6- to CentOS 6.7
- Cleanups

PR:                     205846
Submitted by:           xmj
In Collaboration with:  allanjude, netchild, xmj
Exp-run:                antoine
Sponsored by:           Perceivon Hosting Inc.
Differential Revision:  D3428

We'd like to thanks for all the feedback and comments.

 

19:14 netchild 

Re-commit of
64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions (incl. EXP runs by
      antoine)
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with the new 64 bit parts
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (antoine after some EXP-runs)

 

13:35 antoine 

Unbreak INDEX, reverting r392921

With hat:	portmgr

 

13:06 netchild 

64 bit linuxulator support (not activated by default):
 - most of the work was done by Alan Jude
 - all errors are mine
 - 64bit (may) have rough edges
 - I validated
    * that the 32bit part doesn't has deinstall regressions
    * 29 of 72 64bit ports ports don't have deinstall leftovers (more validation
      later, when I dare to activate the 64bit linuxulator in the kernel)
 - the infrastructure part looks mature enough to let more test-bunnies get
   some experience with it
 - to use it you shall have no linux ports installed and have to specify
   (on your own risk) the following in make.conf before installing the ports:
   OVERRIDE_LINUX_BASE_PORT=c6_64
   OVERRIDE_LINUX_NONBASE_PORTS=c6_64

This is on top of the exiting c6 linux ports. Given that CentOS 7 is 64bits
only, we decided to have it as an "overlay" instead of new ports.
The 64bit part only installs 64bit executables, the 32bit ports can not be
installed at the same time (if needed we can think of letting the 64bit
overlay install the 32bit parts too, but given the CentOS 7 comment
above...).

Differential Revision:	https://reviews.freebsd.org/D174
Submitted by:		alanjude
Sponsored by:		Essen FreeBSD Hackathon 2015
Reviewed by:		xmj, eadler (earlier versions)
Approved by:		portmgr (implicit, I remember blanked approval for
			linux parts loooong ago, punish me if you don't
			agree anymore)

 

15:32 xmj 

graphics/linux-c6-libGLU: upgrade to 10.1

- upgrade to 10.1

Differential Revision:	https://reviews.freebsd.org/D1144
Reported by:	Nikolai Lifanov <lifanov@mail.lifanov.com>
Approved by:	swills (mentor)

 

09:07 xmj 

graphics/linux-c6-libGLU: Port of CentOS 6.5's Mesa libGLU

Add port of CentOS 6.5's libGLU library. This allows several games to be used
with the new CentOS ports.

While here:
 - Add c6 libglu to Mk/bsd.linux-apps.mk
 - Add to emulators/linux-c6 as dependency, bump PORTREVISION

Differential Revision:	https://reviews.freebsd.org/D841
Approved by: swills (mentor)
Approved by: portmgr (bapt)