A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 53

- Update to 4.4.4

PR:             ports/128379
Submitted by:   Stephen Montgomery-Smith <stephen math.missouri.edu>

- Fix build WITH_JAVA on i386
- Mark broken on !i386 when built WITH_JAVA (does not build)
- Disable java by default as suggested in ports/127386 (too many problems with
it after all)

PR:             128329
Submitted by:   Stephen Montgomery-Smith <stephen at math dot missouri dot edu>

- Don't install .bat file, unbreak
- While here, minor cleanups + remove obsolete 5.x condition

PR:             127386
Submitted by:   Stephen Montgomery-Smith <stephen at math dot missouri dot edu>

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Fix build after xorg cleanup

- Chase graphics/ImageMagick shlib version bump

Pointyhat to: mi@

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

Mark broken on 64-bit archs.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Chase NetCDF's upgrade and bump PORTREVISION.

Switch from hdf-4 to netcdf by default to make it packageable.

No need to upgrade if you have a working dx.

- Change dependencies reflecting update in graphics/ImageMagick
- Bump PORTREVISION

Fix typo which prevented the port installing with WITHOUT_JAVA=y

Reported by:    Rob <spamrefuse@yahoo.com>

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- 1) Set permissions as needed, thus opendx-samples won't change them;

- 2) Define JAVA_VERSION.

(No need to bump PORTREVISION)

Reported by:    pointyhat via Kris (1)
Reminded by:    hq (2)

Repocopy math/netcdf to science/netcdf, along with cdf, hdf and hdf5.

PR:             92497
Submitted by:   /me
Repocopied by:  marcus

- Upgrade to 4.4.0;

- Add support of science/cdf;

- Add support of JavaDX;

- Options seems uncompatible with USE_JAVA, remove it.

Chase libversion bumb to libMagick.so.9

PR:             ports/91270

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Chase ImageMagick shlib bump

PR:             ports/78455
Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com> (ImageMagick's
maintainer)

Actually depends on HDF, fix plist and unbreak.

Bump portrevision and dependency on ImageMagick
in order to trace recent ImageMagick update.

Submitted by:   Arjan van Leeuwen <avleeuwen@piwebs.com>
PR:             ports/74487
Approved by:    mat
Reviewed by:    lofi

BROKEN on 5.x: Broken pkg-plist

Approved by:    portmgr (self)

- Netcdf and Hdf conflicts, so let user choose which one to build against.

PR:             ports/64960
Submitted by:   Kay Lehmann <kay_lehmann@web.de>

BROKEN: Inconsistent dependencies (netcdf and hdf)

Chase repomove graphics/hdf* -> science/hdf*

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

upgrade to 4.3.2

Chase lib version change of graphics/ImageMagick.
Bump PORTREVISION acordingly.

de-pkg-comment

Fix PORTCOMMENTs that were killing INDEX builds.

105 pointy hats to:     me
Approved by:            pat

Fix Build, if java is installed

PR:             28771
Submitted by:   Yuri Khotyaintsev <yuri@irfu.se>

${PERL} -> ${REINPLACE_CMD}

PR:             40784
Submitted by:   corecode@corecode.ath.cx
Reviewed by:    flynn@energyhq.homeip.net

Remove USE_NEWGCC, which is no longer supported or required.

Submitted by:   Tilman Linneweh <tilman@arved.de>
PR:             ports/40571

upgrade to 4.2.0

PR:             38474
Submitted by:   Randall Hopper <aa8vb@nc.rr.com>

OpenDX tries to run automake if it finds it, but newer versions don't
work for it. So, define USE_AUTOMAKE to force the old automake-1.4.

First round of auto* cleanups:    - USE_AUTO* -> USE_AUTO*_VER=* where required 
  - USE_AUTO* / *_DEPENDS=.*auto*:*/devel/auto* -> GNU_CONFIGURE where OK    -
Other minor changes to fix things    

Use $ACLOCAL and $AUTOHEADER.    

Fix core dump in dxexec. Bump PORTREVISION.    

Take out the check for ${XFREE86_VERSION} >= 4; libGL always needs   the thread
lib now.    

Use USE_BISON.    

Upgrade to 4.1.3.    

Add PTHREAD_{CFLAGS,LIBS} to CFLAGS and LDFLAGS for XFree86-4.    

Fix building (I hope, I never got this error I'm seeing on bento).    

- Remove `-lcompat' again, the new patches contain code fixes.   - Fix paths in
the documentation (/usr/lpp -> ${PREFIX}).   - patch-ae is no longer needed with
gmake.    

- Use USE_GMAKE to really make this build.   - Add some more dependencies.   -
Add `-lcompat' to the libs so dxui actually works as intended.     The problem
is that the OpenDX folks assume the old V8 style regcomp(3),     not the POSIX
one. Adding the lib is just meant as a stop gap solution,     the real fix to
the code will follow.   - Bump PORTREVISION.    

Fix building.    

Change motif to a normal dependency.  REQUIRES_MOTIF is now called   USE_MOTIF
and generates a LIB_DEPENDS to x11-toolkits/open-motif.  As   before, it implies
USE_XPM (and therefore USE_XLIB).  Motif-dummy is   removed from
PKG_IGNORE_DEPENDS, whose sole resident is now XFree86-3.    

(1) Add new variable, XFREE86_VERSION, to specify which version of       XFree86
(3 or 4) to depend to when USE_XLIB is set.       XFREE86_VERSION defaults to 3
for now, but adventurous users can       override it in /etc/make.conf.  When
XFREE86_VERSION=3, USE_XLIB       will add a dependency to x11/XFree86; when it
is set to 4, the       dependency will be to x11/XFree86-4-libraries.  When     
 XFREE86_VERSION=4, the PKG_IGNORE_DEPENDS and ALWAYS_BUILD_DEPENDS       hacks
to avoid messing with XFree86 are turned off.    

Update to version 4.1.0.    

Number of commits found: 53

9 vulnerabilities affecting 22 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities