Number of commits found: 64

Update poppler to 0.18.0.

The qt3 bindings are removed upstream.
The glib library lost the last gdk-pixbuf code. And rename it from
-gtk to -glib.

Thanks to:      pav for a exp-runs
                bapt for double checking the libreoffice ports

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to 0.16.7.

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

Sync to new bsd.autotools.mk

Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/

This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.

This release features commits by avl, marcus, mezz and myself.

The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:

Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX

(Only the first 15 lines of the commit message are shown above )

Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .

This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.

Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.

Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.

(Only the first 15 lines of the commit message are shown above )

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Update to 0.12.3.

Fix usage of USE_QT* macros. So depends are detected correctly.

PR:             ports/141347
Submitted by:   Dima Panov <fluffy@FreeBSD.org> (based on patch by makc@)

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

(Only the first 15 lines of the commit message are shown above )

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

Update to 0.10.6 to fix a set of vulnerabilities documented in
http://secunia.com/advisories/34746/ .

"Some vulnerabilities have been reported in Poppler which can be
exploited by malicious people to potentially compromise an
application using the library."

PR:             133838
Submitted by:   Mark Foster <mark@foster.cc>
Approved by:    portmgr (implicit)

Presenting GNOME 2.26 for FreeBSD.  See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider.  Almost all of the Gecko consumers
can make use of this provider by setting:

WITH_GECKO=libxul

The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.

Fix the plist when cairo support is disable, bump the PORTREVISION.

PR:             ports/127254
Submitted by:   Tobias Rehbein <tobias.rehbein@web.de>

Update to 0.8.7.

Update to 0.8.6

Update to 0.8.5.

Fix a memory management bug which could lead to arbitrary code execution.

Obtained from:  Felipe Andres Manzano <fmanzano@fceia.unr.edu.ar>
Security:      
http://www.vuxml.org/freebsd/bc20510f-4dd4-11dd-93e7-0211d880e350.html
Security:       CVE-2008-2950

Fix the build in QA Tindy for not able to find moc-qt4 by 'which moc-qt4', so
add a patch to replace from 'which moc-qt4' to '${LOCALBASE}/bin/moc-qt4'.

Reported by:    QA Tindy

- Add jpeg dependency, bump the PORTREVISION on poppler, poppler-qt4 and
  poppler-utils.
- Add --disable-gdk and --disable-gtk-test if it's not poppler-gtk.
- Minor clean up related w/ whitespace.

Update to 0.8.4.

First all, ahze did most of work. Thanks ahze! Last week or so, I am just
merely pick up and help him. Thanks to many testers in both private and
mailing list emails for report a few of build and dependencies problems.
Also, thanks to marcus and Chess Griffin for test in their tinderboxes.

x11/pixman: Update to 0.10.0
-------------------------------------------------------
Firefox 3 needs it. Orignal, the shared library was bumped and ahze has
added a new feature in our USE_GNOME=ltverhack by can control the number
of shared library. To control the number of shared library, add the
ltverhack:N. Right now pixman has USE_GNOME=ltverhack:9 to make it stays
same at libpixman-1.so.9. If anyone want to use ltverhack:N in one of your
port, you need to make sure the ABI doesn't change to use it..
-------------------------------------------------------

(Only the first 15 lines of the commit message are shown above )

Add a missing dependency, fontconfig, when disables ciaro support. Bump the
PORTREVISION.

PR:             ports/123417
Reported by:    Michael Moll <kvedulv@kvedulv.de>

Update to 0.6.4.

Update to 0.6.3.

Update to 0.6.2.

Update to 0.6.

Update to 0.5.91.

- Plug a memory leak [1]
- Fix an integer overflow [2]

Obtained from:  Poppler SVN [1]
                Redhat http://rhn.redhat.com/errata/RHSA-2007-0732.html [2]
Security:       http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2007-3387
Reported by:    miwi via irc.freenode.org/#FreeBSD-GNOME

Install poppler-qt4.pc for poppler-qt4

PR:             ports/114773
Reported by:    Sven Gaerner

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Update to Qt 4.3.0, introduce bsd.qt.mk.

Approved by: portmgr (bsd.port.mk changes)

Make sure that all of the proper --disable-* args are passed to configure
when not building slave ports.

Fix detection of cairo support after the last commit.  Cairo support was
only being enabled when SLAVEPORT was defined, and this had the potential
of breaking package builds.

Don't link to libpoppler from graphics/poppler since it doesn't contain required
Arthur backend. Instead build libpoppler with poppler-qt4

PR:             ports/114551
Reported by:            Sven Gaerner <sgaerner@gmx.net>

Get rid of X11BASE

Submitted by:   mezz

Update to 0.5.9

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Remove QTDIR from CONFIGURE_ENV, it's in there already thanks to framework

Submitted by:   rafan
Tested on:      pointyhat

Took a patch from CVS to fix a few of PDFs display as characters inverted.

PR:             ports/104490
Bugzilla:       https://bugs.freedesktop.org/show_bug.cgi?id=8924
                https://bugs.freedesktop.org/show_bug.cgi?id=8944
Reported by:    trasz <trasz@pin.if.uz.zgora.pl>

Presenting GNOME 2.16.1 for FreeBSD.  This release represents a massive
amount of work by the FreeBSD GNOME Team and our testers.

On top of the usual GNOME update, we have taken this opportunity to move
GNOME from X11BASE to LOCALBASE.  This means roughly 600 ports NOT part of
the GNOME Desktop also need to be changed.  The bulk of the move was carried
out by ahze, mezz, and pav, but it would not have been possible without
cooperation from the FreeBSD KDE team who worked with us to make sure
GNOME and KDE can still coexist happily.  We would also like to send a
shout out to kris and pointyhat for putting up with multiple test runs
until we got something that was solid.

Back to GNOME 2.16.  This release brings a huge amount of new functionality
to FreeBSD.  The standard release notes can be read at
http://www.gnome.org/start/2.16/ .  But on top of what you will read there,

(Only the first 15 lines of the commit message are shown above )

Only depend on cairo if we want cairo support.

PR:             102711
Submitted by:   Shane Bell <decept0@gmail.com>

Make the cairo output backend optional (defaults to enabled).  Turning this
off can help performance when rendering certain PDF documents, especially
those that contain Type 3 fonts.

Reported by:    Veiko Palge <veiko.palge@gmail.com>

Update to 0.5.3.

- Update to 0.5.2

Remove the commandline utilities in order to make this port not conflict
with xpdf. The utilities can now be found in graphics/poppler-utils.

Presenting GNOME 2.14.1 for FreeBSD!  Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release.  In particular, GNOME 2.14 focused
on performance, and they did not miss the mark.  There's some new eye candy,
but most of the big things are waiting until GNOME 2.16.  On the FreeBSD
side, we tried to clean up all the crashers we could.  In particular, we
really improved GNOME's 64-bit support.

The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.

The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).

(Only the first 15 lines of the commit message are shown above )

Update to 0.4.5 which is a security fix for CVE-2006-0301.

Security:       Fixes CVE-2006-0301
Approved by:    portmgr (implicit)

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Disable the QT wrapper for now.  It needs some patching to build correctly,
plus some ports loving to make the dependency tree consistent.

PR:             92397

- Update to 0.4.4

- Update to 0.4.3

Backport xpdf vendor patch
Bump PORTREVISION

Approved by:    gnome (marcus)
Security:      
http://www.idefense.com/application/poi/display?id=342&type=vulnerabilities
               
http://www.idefense.com/application/poi/display?id=343&type=vulnerabilities
               
http://www.idefense.com/application/poi/display?id=344&type=vulnerabilities
               
http://www.idefense.com/application/poi/display?id=345&type=vulnerabilities
                http://secunia.com/advisories/17897/
                CVE-2005-3191, CVE-2005-3192, CVE-2005-3193

Presenting GNOME 2.12 for FreeBSD.  The release is chock full of bug fixes
and new features.  Don't believe me?  Then see for yourself at
http://www.gnome.org/start/2.12/notes/en/.

DO NOT USE portupgrade by itself to upgrade to GNOME 2.12.  Instead, use
the gnome_upgrade.sh script from
http://www.marcuscom.com/downloads/gnome_upgrade212.sh.  This script will
circumvent some potential pitfalls users can see if they use portupgrade
by itself.

In keeping with tradition, GNOME 2.12 for FreeBSD comes with a special
splash screen.  The winner of this release's contest is
Dominique Goncalves <dominique.goncalves@gmail.com>.  His splash screen
was inspired by http://art.gnome.org/contests/2.12-splash/83.

(Only the first 15 lines of the commit message are shown above )

Fix a security problem described at
http://vuxml.FreeBSD.org/24eee285-09c7-11da-bc08-0001020eed82.html.

Reported by:    simon
Obtained from:  graphics/xpdf
Approved by:    portmgr (implicit)
Security:       Fixes xpdf vulnerability

- Update to 0.3.1

- Update to 0.3.0

Update to 0.2.0.

Fix up the pkg-config files so they don't reference a non-existent
poppler-0.1.2.pc.  This cleans up pkg-config --list-all.

- Update to 0.1.2

Add poppler, a PDF rendering library using cairo as its backend.  This
is a fork of the xpdf 3.0 code for use by Freedesktop.org.

Number of commits found: 64

15 vulnerabilities affecting 34 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities