graphics/rubygem-rmagick: Update to 5.5.0

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

graphics/rubygem-rmagick: Update to 5.4.4

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

graphics/rubygem-rmagick: Update to 5.3.0

- Update WWW

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

Mk/Uses/magick.mk: Bump all consumers

Bump all consumers of ImageMagick ports after flavorizing them.

Approved by:	tcberner (mentor, implicit)

graphics/rubygem-rmagick: Update to 5.2.0

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby

Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk

Notable changes are.

- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
  USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.

This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863

I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.

Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D37925

graphics/rubygem-rmagick: Update to 5.1.0

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

graphics/rubygem-rmagick: Update to 5.0.0

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

graphics/rubygem-rmagick: Update to 4.3.0

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics/rubygem-rmagick: Update to 4.2.6

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

graphics/rubygem-rmagick: Update to 4.2.5

- Update RUN_DEPENDS: use ImageMagick 7

Changes:	https://github.com/rmagick/rmagick/blob/main/CHANGELOG.md

framework: Add new USES 'magick' for graphics/ImageMagick*

A new USES has been added to depend on ImageMagick.

	USES=magick

adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.

If a specific version is required, use for example

	USES=magick:6        resp.     USES=magick:7

If only a build, run or test is required, use for example

	USES=magick:build    resp.     USES=magick:6,build,test

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Add LICESE_FILE

Update ImageMagick to 6.9.10.14 [1]

* Add PKGNAMESUFFIX and rename the directory. This was done to show
  that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.

Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.

Chase these changes in all the ports that using IM6.

PR:		225102 (based on, only the version update) [1]
Submitted by:	Pascal Christen <pascal.christen@hostpoint.ch>

ImageMagick to 6.9.9-15.

* Disable FPX (FlashPix) support by default. This image format is really
  rare these days coupled with that there are known CVE's in libfpx and
  it doesn't seem to be maintained these days. It doesn't make sense to
  keep it enabled by default anymore. [1]
* Add new option for RAW support
* Fix portscout macro to only show 6.9.x versions

Bump other ports for the shared library bumps in IM 6.

PR:		222309 [1]
Submitted by:	Anton Yuzhaninov <citrin+pr@citrin.ru> [1]

Chase ImageMagick shlib bump

graphics/rubygem-rmagick: update to 2.16.0

graphics/rubygem-rmagick: Bump PORTREVISION

After an update of graphics/ImageMagick this port need a bump of PORTREVISION

PR:          211849
Reported by: Miroslav Lachman <000.fbsd@quip.cz>
Approved by: mentors (implicit)

Convert USES=gem:autoplist to USES=gem since autoplist is default

create USES=gem and update rubygem- ports to use it

Note that for now ports still have to have USE_RUBY=yes to use USES=gem

PR:		209041
Differential Revision:	https://reviews.freebsd.org/D6070

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 2.15.4

Changes:	https://github.com/rmagick/rmagick/blob/master/CHANGELOG.md

- Update to 2.15.3
- Update WWW

Changes:	https://github.com/rmagick/rmagick/blob/master/CHANGELOG.md

- Update to 2.15.2

Changes:	https://github.com/gemhome/rmagick/blob/master/CHANGELOG.md

- Update to 2.15.1

Changes:	https://github.com/gemhome/rmagick/blob/master/CHANGELOG.md

- Update to 2.15.0
- Add LICENSE
- Convert to new options helper
- Update WWW

Changes:	https://github.com/gemhome/rmagick/blob/master/CHANGELOG.md

Update ImageMagick to 6.9.0.4.

- Normalize the ImageMagick library name so it stays the same regardless of
  what the 16-bit and HDRI option are set to [1]. Teach cmake to look for
  the new name. Bump ports that link to the libraries due to this.
- As a result do away with the "HALFSUPPORTED" option block, and list
  16-bit and HDRI with the other options.
- ImageMagick ships a basic SVG plugin when not using librsvg2 for SVG
  support. This basic SVG plugin needs libxml2 to work [2]. Make libxml2
  a mandatory dependency (instead of only when the SVG option was selected).
- Don't touch .keep files in the modules directory, there files there so
  it useless.

PR:		194949 [1]
PR:		195227 [2]
Requested by:	many [1]
Submitted by:	software-freebsd@interfasys.ch [2]

Remove * from LIB_DEPENDS lines and specify the default library name
for ImageMagick. Using '*' it is unsupported and potention bugs here.

graphics/rubygem-rmagick: update to 2.13.3

many ruby/rubygem ports: death of rubyforge.org

rubyforge.org shutdown on May 15, 2014. This commit accounts for that by doing
several things:

- Deprecate ruby that had only rubyforge.org as MASTER_SITES (and so are now
  only fetchable via our cache)
- Deprecate ports that depend on those
- Update the WWW pkg-descr line that points to rubyforge.org for rubygem ports
  (which are still fetchable from rubygems.org)

The next step will be to remove rubyforge.org from bsd.sites.mk, after these
deprecated ports are deleted.

Phabric:	D591
With hat:	ruby
Approved by:	portmgr (because of committing to unstaged graphics/mingplot port)

Update to 6.8.9-3 [1][3].

Use USES=compiler:openmp for the OPENMP option[2]
Ditch the use of perl for patching etc [4] and silence perl threaded check [6]
-delay option spurious message should be fixed [5]

JASPER option was replace by JPEG2000 for JP2k support.
Put 16BIT_PIXEL and HDRI option separate option block. These options change
  the library name, so the user needs to take this into consideration.
Use new LIB_DEPENDS syntax.
Use @sample for config files.
Sprinkle some USES=pkgconfig for some ports, since we don't pull it in
  anymore at run-time.

PR:		185462 [1]

- Add stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Use single space after WWW:

- Make X11 dependency on ImageMagick optional

PR:		ports/179481
Submitted by:	David Demelier <demelier.david@gmail.com>

(Readdition of graphics/rubygem-rmagick which was removed on 240397)

RMagick is an interface between the Ruby programming language and the
ImageMagick and GraphicsMagick image processing libraries.

WWW:	http://rmagick.rubyforge.org/

- Remove graphics/rubygem-rmagick because it's a duplicate of ruby-rmagick

Sugested by:    stas

Update to 2.11.0

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 2.10.0

RMagick is an interface between the Ruby programming language and the
ImageMagick and GraphicsMagick image processing libraries.

WWW:    http://rmagick.rubyforge.org/