Number of commits found: 72

Relative to the problem mentioned in the PR, fix the rc.d script
to avoid a circular dependency problem which adversely affects
other scripts, including those in the base.

Specifically, it's impossible to have both:
REQUIRE: LOGIN
and
BEFORE: NETWORKING

Since this services runs as an unprivileged user, LOGIN wins.

While I'm here, apply various other cleanups, including adding
KEYWORD: shutdown, putting the elements in more typical order,
fixing some syntax issues, etc.

Bump PORTREVISION due to the previous incarnation of the rc.d
script being actually pathological, rather than just slightly
wacky.

PR:             ports/165928
Submitted by:   Matt Dawson <matt@chronos.org.uk>
Feature safe:   yes

Fix LIB_DEPENDS assignment when building with SNMP support

PR:             ports/166009
Submitted by:   Alex Bakhtin <Alex.Bakhtin at gmail.com>
Feature safe:   yes

- Fix USB-attached devices in xerox_mfp driver [1]
- Recommend to use etc/devd/saned.conf instead of modifying /etc/devd.conf
- Provide a working example for etc/devd/saned.conf
- rc.d script requires LOGIN
- Bump PORTREVISION

Obtained from:  upstream [1]

- Remove WITH_FBSD10_FIX, is no longer needed

- Fix build on FreeBSD 10

Reported by:    pointyhat

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Update to 1.0.22

PR:             159479
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Fix the genesys backend on 64 bit machines by:
Specify missing return type of function, pointers cannot be casted to int.

Submitted by:   hselasky@

Enable pthread to unbreak scanning with saned + hpaio
while here, fix build with NOPORTDOCS

PR:             based on ports/151157
Submitted by:   Marcin Wisnicki <mwisnicki+freebsd at gmail.com>

Add 'saned' user/group the Right Way.

PR:             147948
Submitted by:   David DEMELIER <demelier.david@gmail.com>
Feature safe:   yes

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Update tp 1.0.21

PR:             146674
Submitted by:   Ports Fury

Add an RC script for saned, and borrow machinery for creating
a dedicated sandbox user account from the nullmailer port.

Also add a pkg-message which describes how to tie down a USB
scanner to this sandbox using devd(8) in FreeBSD 8, as well as
describing what config files likely need editing.
Note: This text probably belongs in the FreeBSD Handbook.

Bump PORTREVISION.

Reviewed by:    dougb (with edits to saned.in)

- update to jpeg-8

- Add IPV6 option

PR:             ports/137976
Submitted by:   Richard F. Ostrow Jr. <rich AT warfaresdl.com>
Approved by:    tabthorpe, glarkin (mentors, implicit)

Unbreak for real the build with libusb support under 8.X.  Now one can
use USB scanners under 8.X

Submitted by:   Hans Petter Selasky <hselasky@c2i.net>
Reviewed by:    rink
Approved by:    miwi
Tested by:      blackend (with some CanoScan LIDE scanners)

- update to jpeg7
Tested by:      pav on pointyhat

Disable usb support by default in -CURRENT instead of mark it as BROKEN. It's
a bit silly to mark it as BROKEN when it can be disable without stop port
that I am trying to install.

- Mark BROKEN with USB on CURRENT

Reported by:    pointyhat

Mark MAKE_JOBS_UNSAFE=yes reported by P6 TB

- Fix build with portupgrade

- Update to 1.0.20

PR:             134627
Submitted by:   Ports Fury

- Unbreak on -CURRENT

Submitted by:   thompsa

- Chase libusb20 rename in r189585.
- Mark sane-backends broken on current due to changes
  in USB stack.

Reviewed by:    thompsa (old version), miwi
Tested by:      miwi

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 1.0.19

PR:             120817
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Remove the pre-everithing (sic) target. It obviously didn't do what it was
meant to since the typo got committed and the message it should have
displayed is now obsolete.

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Fix build after objformat removal

- Update to 1.0.18

PR:             ports/103638
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include dns/ editors/ emulators/ finance/
  games/ graphics/ maintained by ports@

PR:             ports/101916
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

Fix package build: Make installation from port and package equivalent again.
The package was missing the default dll.conf which also caused build failures
further down the stream, eg. in graphics/hpoj.  Bump PORTREV accordingly.
Fix some grammar while here.

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

- Preserv modified config files
- Bump PORTREVISION
- Reorganize Makefile
- portlint(1)

PR:             90988
Reported by:    Torfinn Ingolfsen <tingo@start.no>

- Update to 1.0.17

PR:             ports/90929
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Disable broken device locking.

- Update to 1.0.16

PR:             ports/85383
Submitted by:   Ports Fury

change the libtool version to use from 1.3 to 1.5

- update to libusb-0.1.10a
- bump library version to all ports that depends on libusb

PR:             79084
Submitted by:   John Reynolds <johnjen@reynoldsnet.org>

Update to version 1.0.15

PR:             ports/73732
Submitted by:   Ports Fury

Update MASTER_SITES

PR:             ports/70913
Submitted by:   Koop Mast

Fix LIB_DEPENDS: libgphoto2.2 is in graphics/libgphoto2, not in
graphics/gphoto2

PR:             ports/70841
Submitted by:   Ying-Chieh Chen

- add OPTION (WITHOUT_)USB
- make use of DOCSDIR
- Bump PORTREVISION

- Convert to OPTIONS

PR:             ports/70737, ports/70738
Submitted by:   Ying-Chieh Chen <yinjieh@csie.nctu.edu.tw>

- Fix MASTER_SITES
- Utilize USE_GNOME
- Add WITHOUT_NLS

PR:             ports/66467
Submitted by:   Ports Fury

Update to 1.0.14.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Add USE_GETTEXT and bump PORTREVISION.

Submitted by:   trevor
Tested by:      bento

Now gettext 0.12.1 is gettext-old.

- Fix pkg-plist

PR:             60010
Submitted by:   Ports Fury

Update to 1.0.13.

Bump the PORTREVISION for the ports directly affected by the gettext upgrade.

Prodded by:     kris

Chase the libintl.so shared lib version.

Add a patch to fix a memory alignment problem for FireWire.

Fix plist.

Update to 1.0.12.

A USB hacker should have a look at sanei/sanei_usb.c, the function
sanei_usb_control_msg needs a little bit of FreeBSD specific code.

Submitted by:   KATO Tsuguru <tkato@prontomail.com>
Prodded to by:  Are Bryne <are.bryne@communique.no> (via ports@)
PR:             52715

de-pkg-comment

Update to 1.0.11

PR:             ports/48145
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Use the latest libusb.

PR:     ports/46061

Update to 1.0.9

PERL -> REINPLACE_CMD

PR:             39938
Submitted by:   Oliver Braun <obraun@informatik.unibw-muenchen.de>

Update to 1.0.8

PR:             38710
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Add WITH_GPHOTO2 knob

PR:             35961
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Bump shared library version due to libusb update    

Fix typo in MASTER_SITES    

Update to 1.07    

Update to 1.0.6    

Update to version 1.0.5    

- Reorganize MASTER_SITES   - Add missing INSTALL_SHLIB   - Remove unused
pkg-message   - Fix pkg-plist    

Upgrade to 1.0.4,    

Number of commits found: 72

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities