Number of commits found: 47

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

Remove USE_GNOME=gnometarget from ports. It has been a empty keyword since
mid 2008.

PR:             ports/159624
Submitted by:   Ruslan Mahmatkhanov <cvs-src@yandex.ru>

- Update graphics/sdl_gfx to version 2.0.22
- Update Mk/bsd.sdl.mk for the new shared lib version
- Bump portrevisions for all ports depending on graphics/sdl_gfx

Install pkgconfig data in the correct place.

PR:             ports/154029
Submitted by:   Dima Panov <fluffy@FreeBSD.org>
Feature safe:   yes

Sync to new bsd.autotools.mk

- Update to 2.0.21

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

Updated sdl_gfx to 2.0.19
Bumped PORTREVISION on dependent ports.

Approved by:    miwi (mentor)

Remove references to my mirror, which will be decommissioned shortly;
fall back to FreeBSD mirrors in case the port has no others.

Updated my mail address to use @FreeBSD.org now.

Approved by: miwi (co-mentor), beech (mentor)

- Update to  2.0.18

PR:             130050
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

(Only the first 15 lines of the commit message are shown above )

- Update to 2.0.17

PR:             124259
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

- Update to 2.0.16
- OPTIONize MMX flag
- Pass maintainership to submitter

PR:             117612
Submitted by:   Marcus von Appen <mva@sysfault.org>

Return to pool: hopefully they will have a chance of being updated
prior to the freeze.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Use libtool port instead of included version to avoid objformat a.out botch

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

- Take over maintainership of the abandoned SDL ports.
- Add an additional mirror for a few of them.
- Fix a few minor portlint(1) complaints.

Drop maintainership, ENOTIME for these ports now.

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Fix MASTER_SITES and WWW: line.

Take maintainership.

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

Update to version 2.0.13

PR:             ports/75399
Submitted by:   Ports Fury

Update to 2.0.12

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

- Update to version 2.0.11

PR:             ports/66885
Submitted by:   Ports Fury

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Properly use SDL everywhere:
        USE_SDL=yes     -> USE_SDL=sdl  (good examles everywhere)
        WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)

See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.

PR:             follow-ups of ports/55494, ports/61877
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

- Update to version 2.0.10

PR:             60271
Submitted by:   Ports Fury

- Update to version 2.0.9

PR:             58628
Submitted by:   Ports Fury

update graphics/sdl_gfx: add WITH_MMX knob

PR:             55687
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

fix typo MASTER_SIET_SUBDIR -> MASTER_SITE_SUBDIR

update graphics/sdl_gfx:
  - Utilize USE_SDL

PR:             55057
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Update to 2.0.8. shlib bump.

update graphics/sdl_gfx: 2.0.3 --> 2.0.7

PR:             53102
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

Use the same header location as other SDL families.

PR:             ports/48611
Submitted by:   Kimura Fuyuki <fuyuki@hadaly.org>

de-pkg-comment

Update port: graphics/sdl_gfx
GNU_CONFIGURE -> USE_LIBTOOL

PR:             ports/46940
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

add SDL_gfx 2.0.3
SDL graphics drawing primitives and other support functions

Number of commits found: 47

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities