17:13 Daniel Engberg (diizzy) 

*/*: Bump jpeg-turbo users treewide

New major version 3.0.0

    664a2fa

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>
  *  Alexander Gromnitsky
  *  Alexander Kojevnikov <alexander@kojevnikov.com>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nedotsukov <bland@FreeBSD.org>
  *  Alexander Nedotsukov <bland@mail.ru>
  *  Alexander Y. Grigoryev <alexander.4mail@gmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Anatoliy Dmytriyev <tolid@plab.ku.dk>
  *  Anatoly Borodin <anatoly.borodin@gmail.com>
  *  Anders Nordby <anders@fix.no>
  *  Andras Horvath <han@log69.com>
  *  Andreas Daehn <ad001@uni-rostock.de>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Slusar <anray@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anes Mukhametov <anes@anes.su>
  *  Anonymous <swell.k@gmail.com>
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Antonio Carlos Venancio Junior (<antonio@inf.ufsc.br>)
  *  Arjan van Leeuwen <avleeuwen@piwebs.com>
  *  Ashish SHUKLA <ashish@FreeBSD.org>
  *  Bill Fumerola <billf@chc-chimes.com>
  *  Björn König <bkoenig@alpha-tierchen.de>
  *  Brad Hendrickse <bradh@iafrica.com>
  *  Bruce M Simpson <bms@FreeBSD.org>
  *  Carlos Eduardo G. Carvalho <cartola@openit.com.br>
  *  Charlie Kester <corky1951@comcast.net>
  *  Choe, Cheng-Dae
  *  Choe, Cheng-Dae <whitekid@gmail.com>
  *  Chris D. Faulhaber <jedgar@FreeBSD.org>
  *  Chris D. Faulhaber <jedgar@fxp.org>
  *  Chris Piazza <cpiazza@FreeBSD.org>
  *  Christopher Key <cjk32@cam.ac.uk>
  *  Chuck Robey <chuckr@FreeBSD.org>
  *  Corey Smith <corsmith@gmail.com>
  *  Dan Langille <dvl@FreeBSD.org>
  *  Daniel O'Connor <darius@dons.net.au>
  *  Daniel Roethlisberger <daniel@roe.ch>
  *  Danilo Egea Gondolfo <danilo@FreeBSD.org>
  *  Dave Cottlehuber <dch@skunkwerks.at>
  *  David Bremner <bremner@unb.ca>
  *  David Gilbert <dgilbert@velocet.ca>
  *  David Naylor <dbn@FreeBSD.org>
  *  David Yeske <dyeske@gmail.com>
  *  Denis Barov <dindin@dindin.ru>
  *  Denis Podolskiy <bytestore@yandex.ru>
  *  Dennis Herrmann <adox@mcx2.org>
  *  Devaux Fabien <fab@gcu.info>
  *  Dmitry Sivachenko <dima@Chg.RU>
  *  Dominik Brettnacher <domi@nonsensss.de>
  *  Donn Miller <dmmiller@cvzoom.net>
  *  Douglas Carmichael <dcarmich@mcs.com>
  *  Douglas K. Rand <rand@meridian-enviro.com>
  *  Edwin Groothuis <edwin@mavetju.org>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Emanuel Haupt <ehaupt@critical.ch>
  *  Emil J.V. Björsell (Jev)
  *  Emmanuel Vadot <manu@FreeBSD.org>
  *  Eric Anholt <anholt@FreeBSD.org>
  *  Eric Freeman <freebsdports@chillibear.com>
  *  Eric P. Scott <eps+pbug0703@ana.com>
  *  Erwin Lansing <erwin@FreeBSD.org>
  *  Eugene Mychlo <myc@barev.net>
  *  Fernan Aguero <fernan@iib.unsam.edu.ar>
  *  Franz Klammer <klammer@webonaut.com>
  *  FreeBSD GNOME Team <gnome@FreeBSD.org>
  *  G. Adam Stanislav <adam@whizkidtech.net>
  *  Garrett Wollman <wollman@lcs.mit.edu>
  *  Gea-Suan Lin <gslin@gslin.org>
  *  George Reid <greid@ukug.uk.freebsd.org>
  *  Gerrit Beine (<gerrit.beine@gmx.de>)
  *  Gerrit Beine (<tux@pinguru.net>)
  *  Glenn Johnson
  *  Greg Lewis <glewis@FreeBSD.org>
  *  Gustau Perez <gustau.perez@gmail.com>
  *  Gustau Pérez i Querol <gustau.perez@gmail.com>
  *  Gvozdikov Veniamin <g.veniamin@googlemail.com>
  *  Hernan Di Pietro <hernan.di.pietro@gmail.com>
  *  Hiroto Kagotani <hiroto.kagotani@gmail.com>
  *  Horia Racoviceanu <horia@racoviceanu.com>
  *  Hye-Shik Chang <perky@fallin.lv>
  *  Hye-Shik Chang <perky@python.or.kr>
  *  Igor Pokrovsky <ip@doom.homeunix.org>
  *  Igor Pokrovsky <tiamat@comset.net>
  *  James FitzGibbon <jfitz@FreeBSD.org>
  *  Jamie Hermans <jamie@hermans.ca>
  *  Jan Henrik Sylvester <me@janh.de>
  *  Janni
  *  Janos Mohacsi <janos.mohacsi@bsd.hu>
  *  Jason Helfman <jgh@FreeBSD.org>
  *  Jean-Marc Zucconi <jmz@FreeBSD.org>
  *  Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@FreeBSD.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Jeff Molofee
  *  Jeremy Norris <ishmael127@home.com>
  *  Jeremy Norris <ishmael27@home.com>
  *  Joe Marcus Clarke <marcus@FreeBSD.org>
  *  Johannes Dieterich <jmd@FreeBSD.org>
  *  Johannes Jost Meixner <johannes@perceivon.net>
  *  Johannes Meixner <johannes@perceivon.net>
  *  John Hay
  *  John McAree <john@mcaree.org>
  *  John Prather
  *  John Reynolds <johnjen@reynoldsnet.org>
  *  Joris Dedieu <joris.dedieu@gmail.com>
  *  Jose Alonso Cardenas Marquez <acardenas@bsd.org.pe>
  *  Jose Jachuf <jjachuf@gmail.com>
  *  Joseph Koshy <koshy@india.hp.com>
  *  Juergen Unger <j.unger@choin.net>
  *  KANOU Hiroki <kanou@mil.allnet.ne.jp>
  *  KIRIYAMA Kazuhiko
  *  Kay Lehmann
  *  Kevin Golding <ports@caomhin.org>
  *  Kimura Fuyuki <fuyuki@hadaly.org>
  *  Koop Mast <kwm@FreeBSD.org>
  *  Kris Kennaway <kris@FreeBSD.org>
  *  Kris Moore <kmoore@FreeBSD.org>
  *  Kubilay Kocak <koobs@FreeBSD.org>
  *  Kurt Kanzenbach <kurt@kmk-computers.de>
  *  Kyle Martin <mkm@ieee.org>
  *  Laurent Courty
  *  Leonardo Martins <lmartins@nepe.eee.ufg.br>
  *  Lev Serebryakov <lev@FreeBSD.org>
  *  Malte Lance <malte.lance@gmx.net>
  *  Marc Fonvieille <blackend@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org>
  *  Mario Sergio Fujikawa Ferreira <lioux@FreeBSD.org> et al.
  *  Mark Atkinson <atkin901@gmail.com>
  *  Mark Murray <markm@FreeBSD.org>
  *  Mark Pulford <mark@kyne.com.au>
  *  Markus Brueffer <markus@FreeBSD.org>
  *  Martin Dieringer <martin.dieringe@gmx.de>
  *  Martin Dieringer <martin.dieringer@gmx.de>
  *  Martin Matuska <mm@FreeBSD.org>
  *  Martin Neubauer <m.ne@gmx.net>
  *  Martin Sugioarto <martin.sugioarto@udo.edu>
  *  Martin Tournoij <carpetsmoker@rwxrwxrwx.net>
  *  Martin Tournoij <carpetsmoker@xs4all.nl>
  *  Martin Wilke <miwi@FreeBSD.org>
  *  Mateusz Piotrowski <0mp@FreeBSD.org>
  *  Mathieu Arnold
  *  Matthew Luckie <mjl@luckie.org.nz>
  *  Matthew X. Economou <xenophon+fbsdports@irtnog.org>
  *  Matthias Fechner <mfechner@FreeBSD.org>
  *  Matthieu Volat <mazhe@alkumuna.eu>
  *  Maurice Castro <maurice@serc.rmit.edu.au>
  *  Maxim Sobolev <sobomax@FreeBSD.org>
  *  Michael Gmelin <freebsd@grem.de>
  *  Michael Johnson <ahze@FreeBSD.org>
  *  Michael Johnson <ahze@ahze.net>
  *  Michael Nottebrock <lofi@FreeBSD.org>
  *  Michael Reifenberger <mr@FreeBSD.org>
  *  Mike Krutov <neko@takino.org>
  *  Mikhail T. <mi@aldan.algebra.com>
  *  Mikhail Teterin <mi@aldan.algebra.com>
  *  Muhammad Moinur Rahman <5u623l20@gmail.com>
  *  NAKATA Maho <maho@FreeBSD.org>
  *  Naram Qashat <cyberbotx@cyberbotx.com>
  *  Nick Hilliard <nick@foobar.org>
  *  Nicola Vitale <nivit@FreeBSD.org>
  *  Nicola Vitale <nivit@email.it>
  *  Nikolay Korotkiy <sikmir@gmail.com>
  *  Norio Suzuki <nosuzuki@e-mail.ne.jp>
  *  Oliver Heesakkers <dev2@heesakkers.info>
  *  Oliver Lehmann <oliver@FreeBSD.org>
  *  Olivier Duchateau
  *  Paul Everlund
  *  Pav Lucistnik <pav@FreeBSD.org>
  *  Pedro F. Giffuni
  *  Pedro Garcia Freitas <sawp@sawp.com.br>
  *  Pedro Giffuni
  *  Pedro Giffuni <pfg@FreeBSD.org>
  *  Pete Fritchman <petef@FreeBSD.org>
  *  Pete Fritchman <petef@databits.net>
  *  Peter Ankerstal <peter@pean.org>
  *  Peter Jeremy <peterjeremy@optushome.com.au>
  *  Peter Schmiedeskamp <pschmied@qwest.net>
  *  Phil Phillips <pphillips@experts-exchange.com>
  *  Pietro Cerutti <gahr@FreeBSD.org>
  *  Pietro Cerutti <gahr@gahr.ch>
  *  Piotr Kubaj <pkubaj@anongoth.pl>
  *  Piotr Smyrak <smyru@heron.pl>
  *  Piotr Smyrak, piotr.smyrak@heron.pl
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  Quentin Stievenart <acieroid@awesom.eu>
  *  R Joseph Wright <rjoseph@mammalia.org>
  *  Radim Kolar
  *  Rainer Hurling <rhurlin@gwdg.de>
  *  Randall Hopper
  *  Randall Hopper <aa8vb@ipass.net>
  *  Randall Hopper <aa8vb@nc.rr.com>
  *  Reinier de Blois <rddeblois@gmail.com>
  *  Richard Hwang <rhwang@bigpanda.com>, Mikhail Teterin
<mi@aldan.algebra.com>, Jun-ichiro itojun Itoh <itojun@itojun.org>
  *  Rick Elrod <codeblock@eighthbit.net>
  *  Rob Farmer <rfarmer@predatorlabs.net>
  *  Rod Person <rodperson@rodperson.com>
  *  Roland Jesse <roland.jesse@gmx.net>
  *  Romain Tartiere <romain@FreeBSD.org>
  *  Ron van Daal
  *  Ronald Kuehn <rk@ronald.org>
  *  Rong-En Fan <rafan@infor.org>
  *  Rusmir Dusko <nemysis@FreeBSD.org>
  *  Rusty Nejdl <rnejdl@ringofsaturn.com>
  *  Ryan Melcer <rmelcer@iteris.com>
  *  Ryan Steinmetz <zi@FreeBSD.org>
  *  Sahil Tandon <sahil@FreeBSD.org>
  *  Sam Lawrance
  *  Satoshi Asami <asami@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Seiichirou Hiraoka
  *  Serge Negodyuck <petr@petrovich.kiev.ua>
  *  Sergey A. Osokin <osa@FreeBSD.org>
  *  Sergey Skvortsov <skv@protey.ru>
  *  Sergey V. Dyatko <sergey.dyatko@gmail.com>
  *  Shane Ambler
  *  Shaun Amott <shaun@inerd.com>
  *  Shell Hung <shell@shellhung.org>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Simun Mikecin <numisemis@yahoo.com>
  *  Sofian Brabez <sbrabez@gmail.com>
  *  Stanislav Sedov <ssedov@mbsd.msk.ru>
  *  Stanislav Sedov <stas@FreeBSD.org>
  *  Stas Timokhin <devel@stasyan.com>
  *  Stas Timokhin <stast@bsdportal.ru>
  *  Stefan Walter <sw@gegenunendlich.de>
  *  Stephen Roome <steve@pepcross.com>
  *  Steve Wills <steve@meatwad.mouf.net>
  *  Steve Wills <swills@FreeBSD.org>
  *  Steven Kreuzer <skreuzer@FreeBSD.org>
  *  Steven Wallace <swallace@FreeBSD.org>
  *  Sunpoet Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TAOKA Fumiyoshi
  *  TATEISHI Katsuyuki <katsu@iec.hiroshima-u.ac.jp>
  *  Tassilo Philipp <tphilipp@potion-studios.com>
  *  Thibault Payet <monwarez@mailoo.org>
  *  Thierry Thomas <thierry@pompo.net>
  *  Thomas Dreibholz <dreibh@iem.uni-due.de>
  *  Thomas Gellekum <tg@FreeBSD.org>
  *  Thomas Hurst <tom@hur.st>
  *  Tilman Linneweh <arved@FreeBSD.org>
  *  Tim Bishop <tim@bishnet.net>
  *  Tod McQuillin <devin@spamcop.net>
  *  Tomoyuki Sakurai <cherry@trombik.org>
  *  Tsung-Han Yeh <snowfly@yuntech.edu.tw>
  *  UMENO Takashi <umeno@rr.iij4u.or.jp>
  *  Ulrich Spoerlein <q@uni.de>
  *  Vasil Dimov <vd@FreeBSD.org>
  *  Veniamin Gvozdikov <vg@FreeBSD.org>
  *  Vincent Tantardini <vinc@FreeBSD-fr.org>
  *  Vladimir Chukharev
  *  Wen Heping <wen@FreeBSD.org>
  *  Wen Heping <wenheping@gmail.com>
  *  Wen heping <wenheping@gmail.com>
  *  Wen heping<wenheping@gmail.com>
  *  Will Andrews <andrews@technologist.com>
  *  Yi-Jheng Lin <yzlin@cs.nctu.edu.tw>
  *  Ying-Chieh Liao <ijliao@FreeBSD.org>
  *  Yinghong Liu <relaxbsd@gmail.com>
  *  Yinghong.Liu <relaxbsd@gmail.com>
  *  Yuan-Chung Hsiao <ychsiao@ychsiao.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nacai@iname.com>
  *  Yukihiro Nakai <nakai@mlab.t.u-tokyo.ac.jp>
  *  Yuri Victorovich <yuri@FreeBSD.org>
  *  Yuri Victorovich <yuri@rawbw.com>
  *  Yuu Yashiki
  *  Yuzo FURUKAWA <hurukawa@kuee.kyoto-u.ac.jp>
  *  Zhihao Yuan <lichray@gmail.com>
  *  Zsolt Udvari <udvzsolt@gmail.com>
  *  ache
  *  alepulver
  *  anhot
  *  antonakis@gmail.com
  *  argv[0] (Iouri V. Ivliev)
  *  arved
  *  asami
  *  bf <bf@FreeBSD.org>
  *  bmc@WillsCreek.COM
  *  buganini@gmail.com
  *  cacho@mexicano.gdl.iteso.mx
  *  cartola (Carlos E. G. Carvalho)
  *  cartola@openit.com.br
  *  cfs@ing.puc.cl (original)
  *  chinsan
  *  chinsan <chinsan.tw@gmail.com>
  *  coryking
  *  cracauer@cons.org "Martin Cracauer"
  *  demon@FreeBSD.org
  *  dillon
  *  dom@happygiraffe.net
  *  erich@FreeBSD.org
  *  fenner
  *  fernan@iib.unsam.edu.ar
  *  frankch@waru.life.nthu.edu.tw
  *  gahr
  *  gary@hotlava.com
  *  gerard
  *  giffunip@asme.org
  *  glebius@FreeBSD.org
  *  gurkan@phys.ethz.ch
  *  hsu
  *  ijliao
  *  jamie
  *  jedgar@FreeBSD.org
  *  jeff@cetlink.net
  *  jjachuf@gmail.com
  *  jmz
  *  johalun
  *  johan
  *  johans
  *  kwm@FreeBSD.org
  *  lbartoletti <lbartoletti@FreeBSD.org>
  *  lesi@FreeBSD.org
  *  lichray@gmail.com
  *  luigi@FreeBSD.org
  *  maho@FreeBSD.org
  *  marcus@FreeBSD.org
  *  mb@imp.ch
  *  mi
  *  mm@FreeBSD.org
  *  nemysis <nemysis@gmx.ch>
  *  nik
  *  nork@FreeBSD.org
  *  olgeni@FreeBSD.org
  *  paulo@isr.uc.pt
  *  petef@FreeBSD.org
  *  pgs
  *  ports@FreeBSD.org
  *  proff@iq.org
  *  punkt.de Hosting Team <mops@punkt.de>
  *  rfarmer@predatorlabs.net
  *  roberto
  *  roland.jesse@gmx.net
  *  rpsfa@rit.edu
  *  saper@system.pl
  *  smace
  *  sobomax
  *  stas
  *  stb@lassitu.de
  *  theraven@FreeBSD.org
  *  thierry@pompo.net
  *  tobez
  *  trasz <trasz@pin.if.uz.zgora.pl>
  *  trevor
  *  vanilla
  *  will
  *  wolman@cs.washington.edu
  *  yukinopo@livedoor.com

With hat:	portmgr

    022e658

21:17 Bernhard Froehlich (decke) 

graphics/sdl_image: Add CPE information

Approved by:	portmgr (blanket)

    a783f2a

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

19:09 sunpoet 

Update MASTER_SITES and WWW

Approved by:	portmgr (blanket)

 

19:18 amdmi3 

- Switch sdl_image and sdl2_image from dynamic loading of dependency
  libraries to normal shared linking
- While here, add USES=sdl and localbase add LICENSE_FILE and strip library

PR:		196099
Submitted by:	jbeich

 

16:24 amdmi3 

Take maintainership of SDL/SDL2 ports

 

19:04 jbeich 

graphics/sdl_image: backport XCF vulnerability fix

Obtained from:	upstream (SDL_image-2.0.2)
Security:	CVE-2017-2887
Tested by:	Debian

 

12:50 sunpoet 

Update to 0.6.0

- Bump PORTREVISION for dependent ports

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS

 

22:27 rene 

Reset mva@'s ports, he handed in his ports bit.

 

14:00 mat 

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

 

11:17 sunpoet 

- Update to 0.5.0
- Bump PORTREVISION for graphics/webp shlib change

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS

 

18:33 antoine 

Convert to USES=jpeg

 

08:21 mva 

- Provide OPTION knobs for the LIB_DEPENDS of sdl_image and sdl2_image

PR:		195987
Submitted by:	jbeich@

 

20:54 bapt 

Bump portrevision after png update

 

19:04 antoine 

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

 

16:48 tijl 

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)

 

20:50 gerald 

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

 

03:25 sunpoet 

- Update to 0.4.0
- Add LICENSE
- Sort LIB_DEPENDS
- Use USES=libtool
- Do not silence installation message
- Bump PORTREVISION for graphics/webp shlib change

Changes:	https://chromium.googlesource.com/webm/libwebp/+/master/NEWS

 

15:11 tijl 

Convert to USES=libtool.

 

09:12 mva 

- Enable stagedir support
- Convert to new LIB_DEPENDS
- Convert USE_GMAKE=yes -> USES=gmake

 

18:35 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

 

22:49 mm 

Bump some PORTREVISIONs due to graphics/webp update to 0.3.1

 

08:34 mva 

- Add WEBP image support
- Trim Makefile headers
- Switch to USES

 

05:26 dinoex 

- update png to 1.5.10

10:18 mva 

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

06:47 dinoex 

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

11:46 dinoex 

- update to jpeg-8

09:43 mva 

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

11:11 dinoex 

- update to jpeg7
Tested by:      pav on pointyhat

21:45 mva 

Updated my mail address to use @FreeBSD.org now.

Approved by: miwi (co-mentor), beech (mentor)

22:46 pav 

- Update to 1.2.7

PR:             ports/129128
Submitted by:   Marcus von Appen <mva@sysfault.org> (maintainer)

06:18 rafan 

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk
 - Remove CONFIGURE_TARGET hack in various bsd.*.mk
 - USE_GNOME=gnometarget is now an no-op

Changes to individual ports, other than removing the CONFIGURE_TARGET hack:

= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
  - comms/gnuradio
  - science/abinit
  - science/elmer-fem
  - science/elmer-matc
  - science/elmer-meshgen2d
  - science/elmerfront
  - science/elmerpost

= use x86_64 as ARCH
  - devel/g-wrap

= other changes
  - print/magicfilter
    GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf

Total # of ports modified:  1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)

PR:             126524 (obsoletes 52917)
Submitted by:   rafan
Tested on:      two pointyhat 7-amd64 exp runs (by pav)
Approved by:    portmgr (pav)

20:06 miwi 

- Fix buffer overflows

PR:             122366
Submitted by:   Tsurutani Naoki <turutani@scphys.kyoto-u.ac.jp>
Approved by:    maintainer
Security:      
http://www.vuxml.org/freebsd/b1bcab7d-1880-11dd-a914-0016179b2dd5.html

17:56 miwi 

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

14:05 miwi 

- Update to 1.2.6
- Got rid of library renaming as done for devel/sdl12
- Pass maintainership to submitter

PR:             117610
Submitted by:   Marcus von Appen <mva@sysfault.org>

12:01 shaun 

Return to pool: hopefully they will have a chance of being updated
prior to the freeze.

15:28 sat 

- Fix IMG_ReadXPMFromArray crash
- Bump portrevision

PR:             ports/110018
Submitted by:   "Eric P. Scott" <eps+pbug0703@ana.com>
Approved by:    shaun (maintainer)
Obtained from:  bugzilla.libsdl.org, patch by Michael Koch <konqueror@gmx.de>

20:32 flz 

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

11:21 stas 

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

21:34 shaun 

- Take over maintainership of the abandoned SDL ports.
- Add an additional mirror for a few of them.
- Fix a few minor portlint(1) complaints.

08:33 krion 

Drop maintainership, ENOTIME for these ports now.

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

08:28 krion 

Take maintainership.

03:26 obrien 

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

08:04 obrien 

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

11:15 krion 

Update to version 1.2.4

17:43 marcus 

Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port.  Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version.  To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER.  Both macros accept the same argument: a libtool version.

For example, to use the ports version of libtool-1.5, add the following to
your Makefile:

USE_LIBTOOL_VER=        15

To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:

USE_INC_LIBTOOL_VER=    15

With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).

PR:             63944
Based on work by:eik and marcus
Approved by:    ade (autotools maintainer)
Tested by:      kris on pointyhat
Bound to be hidden problems:    You bet

04:23 edwin 

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

01:01 edwin 

Properly use SDL everywhere:
        USE_SDL=yes     -> USE_SDL=sdl  (good examles everywhere)
        WANT_SDL/HAVE_SDL instead of exists(localbase/lib/lib...)

See
http://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/using-sdl.html
for more information on how to use USE_SDL, WANT_SDL and HAVE_SDL.

PR:             follow-ups of ports/55494, ports/61877
Submitted by:   Edwin Groothuis <edwin@mavetju.org>

05:21 marcus 

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

18:10 krion 

- Update to version 1.2.3

PR:             61524
Submitted by:   Ports Fury

07:10 daichi 

update graphics/sdl_image:
  - Utilize USE_SDL
  - PERL -> REINPLACE_CMD

PR:             55058
Submitted by:   KATO Tsuguru <tkato@prontomail.com>

09:12 sobomax 

Let be hohest: I really don't have a time now to properly maintain all
these great pieces of software, so that let others with more free time
to take over them.

06:04 ade 

Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.

15:06 sobomax 

Update version number of SDL shared library.

02:09 des 

Enable TIFF and XCF support and bump PORTREVISION.

Approved by:    sobomax

12:36 sobomax 

Update to 1.2.2.

12:01 sobomax 

Update to 1.2.1.    

03:22 ache 

Bump png major    

12:55 sobomax 

Move:   devel/sdl --> devel/sdl10   devel/sdl-devel --> devel/sdl12    

14:04 sobomax 

Update to 1.2.0.    

19:48 sobomax 

Update SDL shared library version number.    

14:47 sobomax 

Update to 1.1.0.    

13:08 sobomax 

Update to 1.0.10.    

08:16 sobomax 

Add sdl_image - a simple library to load images of various formats as SDL  
surfaces.