Number of commits found: 39

Mark broken on sparc64-9: fails to compile.

Hat:            portmgr

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

- Fix plist

Reported by:    pointyhat

Upgrade from 7.14.5 to 7.26.3.

Requested by:   Doug Fortune

- Bump PORTREVISION to chase the update of libexif

- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.

PR:             ports/153292
Submitted by:   myself (pgollucci)
Tested by:      -exp run by pav
Approved by:    portmgr (pav)

Sync to new bsd.autotools.mk

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

- update to jpeg7
Tested by:      pav on pointyhat

Guard against configure finding some headers in the wrong places by
explicitly specifying, where includes and libraries are located. A
user reported a problem, when building nip2 with mingw32 installed...

Upgrade vips and nip2 to 7.14.5 from 7.14.4.1 and 7.14.4 respectively.

Spell-out the DISTFILES -- the earlier use of DISTVERSION was causing
troubles... When the author goes back to X.Y.Z releases, this will not
be neccessary, but the current latest version is 7.14.4-1 (the dash
instead of dot is not acceptable for PORTVERSION).

Investigated by:        pav

Update from 7.12.x to 7.14.4. Switch to GraphicsMagick.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Chase OpenEXR library version bumped.

Add libxml2 to the list of the required GNOME-components.

Prompted by:    build failure   (via kris)
Confirmed by:   software author

Unbreak and update the two ports to the latest version of 7.12.4.
Take over maintainership temporarily upon request from the software's
author(s), who were unable to reach the previous maintainer.

In both:
        - use explict --mandir=${PREFIX}/man to avoid man-pages getting
          into ${PREFIX}/shared/man incorrectly
        - deal with the NOPORTDOCS situation by simply not-extracting
          the extra documentation from the distribution tarball
        - parallelize the build to scale with the number of CPUs

In vips:
        - move the (giant) list of man-pages into a separate Makefile.man
        - turn the pages, which contain only `.so other-page', into
          MANLINKS (specified in Makefile.man)

(Only the first 15 lines of the commit message are shown above )

Unbreak, un-deprecate by adding the missing build-dependencies. Reset
maintainer for the time being.

PR:     109658
Submitted by:   Eric P. Scott   (on Feb 27, 2007)
Approved by:    maintainer timeout

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Schedule these broken ports for removal on 2007-04-10 if they are still
broken at that time and no fix has been submitted.

BROKEN: Missing dependency

  Update to latest vips-7.10.21

- Chase fftw3 libver bump

Remove USE_REINPLACE for categories starting with a G

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Bump PORTREVISION to chase the glib20 shared library update.

  Update to latest version 7.10.10

 Developers replaced ditfile AGAIN.
 Here are review of diff between old nad new distfiles:

 (1) libdata upgrades.
 (2) pkg-config files added (vips.pc and vipsCC.pc).
 (3) Some small bugs fixed.
 (4) Two programs added to build.
 (5) Some debug code was removed.

 Your could check, that distfile was replaced by visiting
 official site and reading news.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

  Here are changes between `old' and `new' distfiles (distfile was replaced in
  previous commit):

  (1) One item in TODO
  (2) Fix in `configure', `aclocal.m4' and `config/acinclude.m4' to properly
      find libfftw
  (3) Version string changed in `include/vips/version.h'

 Authors replaced source tarball.

  Upgrade to latest version 7.8.14.

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Fix plist and bump PORTREVISION

Fix pkg-plist

Noticed by: bento
    http://bento.freebsd.org/errorlogs/i386-4-exp-latest/vips-7.8.12.log

Informed maintainer.

Add vips-7.8.12 - Free image processing system

Number of commits found: 39

12 vulnerabilities affecting 17 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities