19:56 Muhammad Moinur Rahman (bofh) 

japanese/mecab: Impelled to share/man

Approved by:    portmgr (blanket)

    7182d6b

00:48 Muhammad Moinur Rahman (bofh) 

*/*: Fix build with llvm16 on 13.2-STABLE

As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.

- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
  1302507 and less than 1400000

Approved by:	portmgr (blanket)
Sponsored by:	The FreeBSD Foundation

    95274bf

18:10 Muhammad Moinur Rahman (bofh) 

japanese/mecab: Fix build with llvm16

- Utilize USES=localbase
- Pet portclippy

Sponsored by:	The FreeBSD Foundation

    a41dcca

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

14:22 Tobias C. Berner (tcberner) 

japanese: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  ABURAYER Rewsirow <pcs51674@asciinet.or.jp>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Akito FUJITA <fujita@zoo.ncl.omron.co.jp>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Daichi GOTO <daichi@FreeBSD.org>
  *  Daisuke Kawahara <kawahara@pine.kuee.kyoto-u.ac.jp>
  *  David O'Brien (obrien@cs.ucdavis.edu)
  *  Eiji-usagi-MATSUmoto <usagi@ruby.club.or.jp>
  *  FUJISHIMA Satsuki <sf@FreeBSD.org>
  *  Fumihiko Kimura <jfkimura@yahoo.co.jp>
  *  HONDA Yasuhiro <honda@kashio.info.mie-u.ac.jp>
  *  Hajimu UMEMOTO <ume@FreeBSD.org>
  *  Hidekazu Kuroki <hidekazu@cs.titech.ac.jp>
  *  Hiroto Kagotani <hiroto.kagotani@gmail.com>
  *  Hyper NIKKI System Project <hnsmaster@h14m.org>
  *  IWASHITA Yoji <shuna@pop16.odn.ne.jp>
  *  Jacques Vidrine <nectar@FreeBSD.org>
  *  Jie Gao <gaoj@cpsc.ucalgary.ca>
  *  Jonathan Hanna
  *  Jun Mukai <mukai@jmuk.org>
  *  KANOU Hiroki <kanou@mil.allnet.ne.jp>
  *  KIRIYAMA Kazuhiko <kiri@kiri.toba-cmt.ac.jp>
  *  KOMATSU Shinichiro <koma2@jiro.c.u-tokyo.ac.jp>
  *  Ka Ho Ng <khng300@gmail.com>
  *  Kawaguti Ginga <ginga-freebsd@ginganet.org>
  *  Kawaguti Ginga <ginga@athena.club.ne.jp>
  *  Kazutoki TAKAMUNE <takamune@avrl.mei.co.jp>
  *  Kentaro Inagaki <JBD01226@niftyserve.ne.jp>
  *  Kimura Fuyuki <fuyuki@mj.0038.net>
  *  Kiriyama Kazuhiko <kiri@kiri.toba-cmt.ac.jp>
  *  Koichiro IWAO <meta+ports@vmeta.jp>
  *  Koichiro IWAO <meta@FreeBSD.org>
  *  MANTANI Nobutaka <nobutaka@FreeBSD.org>
  *  MANTANI Nobutaka <nobutaka@nobutaka.com>
  *  MIHIRA Yoshiro <sanpei@FreeBSD.org>
  *  MITA Yoshio <mita@FreeBSD.org>
  *  Makoto Matsushita <matusita@jp.FreeBSD.ORG>
  *  Makoto Matsushita <matusita@jp.freebsd.org>
  *  Masafumi NAKANE <max@FreeBSD.org>
  *  Masahiro Teramoto <markun@onohara.to>
  *  Masanori Kiriake <seiken@nbs.co.jp>
  *  Masashi CHIBA
  *  Mita Yoshio <mita@jp.FreeBSD.org>
  *  Motoyuki Kasahara <m-kasahr@sra.co.jp>
  *  Murata Shuuichirou <mrt@mickey.ai.kyutech.ac.jp>
  *  NIIMI Satoshi <sa2c@sa2c.net>
  *  Nobuhiro Yasutomi <nobu@psrc.isac.co.jp>
  *  Norikatsu Shigemura <nork@FreeBSD.org>
  *  Po-Chuan Hsieh <sunpoet@FreeBSD.org>
  *  SADA Kenji <sada@FreeBSD.org>
  *  SAITO Itsuro <saito@miv.t.u-tokyo.ac.jp>
  *  SASAKI Shunsuke <ele@pop17.odn.ne.jp>
  *  Sakai Hiroaki <sakai@miya.ee.kagu.sut.ac.jp>
  *  Satoshi TAOKA <taoka@FreeBSD.org>
  *  Satoshi Taoka <taoka@FreeBSD.org>
  *  Seiichirou Hiraoka
  *  Seiya Yanagita <s_yanagita@ybb.ne.jp>
  *  Seth Kingsley <sethk@osd.bsdi.com>
  *  Shigeyuki FUKUSHIMA <shige@FreeBSD.org>
  *  Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
  *  Shigeyuki Fukushima <shige@FreeBSD.org>
  *  Shin-ya MURAKAMI <murashin@gfd-dennou.org>
  *  TAKAHASHI Kaoru
  *  TAKAHASHI Kaoru <kaoru@kaisei.org>
  *  TAKANO, Yuji
  *  TAKATSU Tomonari <tota@FreeBSD.org>
  *  TAKATSU Tomonari <tota@rtfm.jp>
  *  TANAKA Hiroyuki <kattyo@abk.nu>
  *  TAOKA Fumiyoshi <fmysh@iijmio-mail.jp>
  *  TOGAWA Satoshi <toga@puyo.org>
  *  Takashi Mega <mega@minz.org>
  *  Takayuki Nakao <t@nakao.org>
  *  Takefu
  *  The 244th namelessness at 2ch.net
  *  Timothy Beyer <beyert@cs.ucr.edu>
  *  Toshihiko SHIMOKAWA <toshi@tea.forus.or.jp> & ELISA Font Project
  *  Yoichi Asai <yatt@msc.biglobe.ne.jp>
  *  Yoichi NAKAYAMA <yoichi@eken.phys.nagoya-u.ac.jp>
  *  Yoshihiko Sarumaru <mistral@imasy.or.jp>
  *  Yoshiro MIHIRA <sanpei@jp.FreeBSD.org>
  *  Yoshiro MIHIRA <sanpei@sanpei.org>
  *  Yukihiro Nakai <Nakai@Mlab.t.u-tokyo.ac.jp>
  *  Yukihiro Nakai <nakai@FreeBSD.org>
  *  Zhihao Yuan <lichray@gmail.com>
  *  asami
  *  gurkan@phys.ethz.ch
  *  hrs
  *  ichiro@ichiro.org
  *  issei
  *  kuriyama
  *  max
  *  mutoh@openedu.org
  *  n-shigemura@ensure.jp
  *  nivit@email.it
  *  nkazushi@highway.or.jp
  *  nork@FreeBSD.org
  *  sada
  *  shige
  *  sumikawa

With hat:	portmgr

    8d9b67b

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

09:17 linimon 

Mark these ports broken on mips64 and/or mips.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

 

16:31 sunpoet 

Pass maintainership to ports@

PR:		220253
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org> (maintainer)

 

19:23 tijl 

Remove libiconv.so.3 compatibility link that was added in r374303 to
prevent massive PORTREVISION bumps.  Bump dependent ports that have not
been bumped since.

 

13:49 marino 

japanese/mecab: Update MASTER_SITES to unbreak

PR:	174865

 

15:59 mat 

GOOGLE_CODE has gone away.

- If a port has another upstream, remove GOOGLE_CODE
- If a port only has GOOGLE_CODE mark it BROKEN

Some ports have a local mirror configured but for security reasons, it
is not considered upstream.

Sponsored by:	Absolight

 

18:22 tijl 

Split devel/gettext in devel/gettext-runtime and devel/gettext-tools.  The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt.  Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.

USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools.  USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.

Update gettext to 0.19.3.

Remove :oldver from converters/libiconv and devel/gettext-runtime.  Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports.  When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.

Fix some ports that installed files in lib/locale instead of share/locale.

PR:		194038
Reviewed by:	bapt
Exp-run:	antoine
Approved by:	portmgr (antoine)

 

08:38 marino 

japanese/mecab: Remove @dirrm and use @sample

PR:		194368

 

16:01 tijl 

- Replace libtool BUILD_DEPENDS with USE_AUTOTOOLS=libtoolize
- Replace STRIP_CMD with INSTALL_TARGET=install-strip
- Remove PTHREAD_CFLAGS and PTHREAD_LIBS
- Add --copy --force to AUTOMAKE_ARGS so all existing scripts are updated

 

06:27 marino 

japanese/mecab: Convert to USES+= libtool

PR:		189493
Submitted by:	maintainer (Yasuhiro KIMURA)

 

20:47 pawel 

- Strip shared library [1]
- Make PORTDOCS always install [1]
- Change LICENSE_COMB to multi, fix spelling in pkg-descr

PR:		ports/187829 [1]
Submitted by:	maintainer

 

19:48 rakuco 

Set the appropriate BSD license value in LICENSE.

PR:		ports/185678
Submitted by:	Yasuhiro KIMURA <yasu@utahime.org> (maintainer)

 

19:36 antoine 

Convert to STAGEDIR

PR:		ports/182396
Submitted by:	Yasuhiro KIMURA (maintainer)

 

18:47 bapt 

Add NO_STAGE all over the place in preparation for the staging support (cat:
japanese)

 

14:32 bapt 

Fix building without libstdc++

 

05:20 tota 

- Update to 0.996
- Pass maintainership to submitter
- Remove LICENSE_FILE for standard license

PR:		ports/177694
Submitted by:	Yasuhiro KIMURA <yasu_AT_utahime_DOT_org>

 

11:59 mva 

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

 

12:38 tota 

- Update to 0.995
- Add LICENSE section
- Adopt OptionsNG
- Drop CONFIGURE_ARGS because --with-charset is not available any longer
- Make use of PORTDOCS
- Trim Makefile header
- Update pkg-descr

PR:		ports/175258
Submitted by:	Yasuhiro KIMURA <yasu_AT_utahime_DOT_org>

 

06:12 az 

- Set default perl version for ports which currently using
  (5.x+ and x < 12) scheme.

Approved by: bapt@ (portmgr@)

 

03:53 tota 

- Update to 0.994

PR:		ports/171413
Submitted by:	Yasuhiro KIMURA <yasu_AT_utahime_DOT_org>
Approved by:	maintainer timeout (clsung, >5 weeks)
Feature safe:	yes

 

22:26 amdmi3 

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

07:34 ade 

Sync to new bsd.autotools.mk

08:38 clsung 

- Update to 0.98

PR:             ports/144944
Submitted by:   "Junji NAKANISHI" <jun-g_AT_daemonfreaks dot com>

19:36 mezz 

-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.

It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.

With help:      marcus and kwm
Pointyhat-exp:  a few times by pav
Tested by:      pgollucci, "Romain Tartière" <romain@blogreen.org>, and
                a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by:    marcus
Approved by:    portmgr

02:06 clsung 

- Update to 0.97

Changes:
PR:             ports/121400
Submitted by:   TAOKA Fumiyoshi <fmysh_AT_iijmio-mail dot jp>
Reviewed by:    clsung

01:00 linimon 

Welcome bsd.perl.mk.  Add support for constructs such as USE_PERL5=5.8.0+.
Drop support for antique perl.

Work done by:   gabor
Sponsored by:   Google Summer of Code 2007
Hat:            portmgr

11:41 gabor 

- Remove the DESTDIR modifications from individual ports as we have a new,
  fully chrooted DESTDIR, which does not need such any more.

Sponsored by:   Google Summer of Code 2007
Approved by:    portmgr (pav)

09:36 rafan 

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

03:29 clsung 

- Update to 0.96

PR:             ports/113630
Submitted by:   KIMURA Yasuhiro <yasu_AT_utahime dot org>

08:01 clsung 

- Update to 0.95

PR:             ports/110241
Submitted by:   KIMURA Yasuhiro <yasu_AT_utahime dot org>

07:47 clsung 

- New version 0.94 is released.
- Master site is moved to sourceforge.net.

PR:             ports/109513
Submitted by:   KIMURA Yasuhiro <yasu_AT_utahime dot org>

02:42 kris 

Use libtool port instead of included version to avoid objformat a.out botch

05:08 clsung 

- Respect DESTDIR
- Use USE_LDCONFIG

PR:             ports/101878
Submitted by:   Gea-Suan Lin <gslin_AT_gslin dot org>

00:22 clsung 

WITH_CHARSET feature was introduced in my last update.
But it doesn't work unless libiconv is linked.

- Link with libiconv.
- Correct charset examples
- bump PORTREVISION

PR:             ports/101223
Submitted by:   TAOKA Fumiyoshi <fmysh_AT_iijmio-mail dot jp>

02:52 clsung 

- Update to 0.93
- Add WITH_CHARSET knob to set default charset
- Install mecabrc as mecab.dist and preserve modified mecabrc

PR:             ports/101068
Submitted by:   TAOKA Fumiyoshi <fmysh_AT_iijmio-mail dot jp>

15:15 clsung 

- update to 0.92
- I'd like to maintain this NLP-related port

17:07 erwin 

Mark IGNORE for perl < 5.8.0

PR:             97523
Submitted by:   TAKATSU Tomonari <tota@rtfm.jp>

06:16 edwin 

[PATCH] japanese/mecab: fix pkg-plist and pkg-message

        - fix pkg-plist
        - add pkg-message

PR:             ports/97195
Submitted by:   TAKATSU Tomonari <tota@rtfm.jp>

08:19 nobutaka 

- Update to 0.91.
- Split ipadic into upcoming japanese/mecab-ipadic port.

PR:             ports/96887
Submitted by:   TAKATSU Tomonari <tota@rtfm.jp>

10:40 ade 

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

06:52 ade 

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

01:18 linimon 

With portmgr hat on, reset maintainership of knu's ports since he has
been inactive more than 6 months.  We hope to see him back sometime.

01:15 kuriyama 

Back USE_PERL5_BUILD again because configure
checks to use perl5 even if perl5 is not required...

Pointed out by: kris (via pointyhat)

12:58 kuriyama 

- Upgrade to 0.81.
- Unbreak on some conditions.
- Update WWW: line.

No response from:       maintainer

00:02 sf 

respect CFLAGS/PTHREAD_CFLAGS/PTHREAD_LIBS.
(maintainer timeout for 2 weeks)

17:02 knu 

This port has been using japanese/ipadic but it is now at 2.7.0 which
is yet to be supported by mecab 0.7.6, so pull ipadic-2.5.1 itself and
use it.

Reported by:    "T.P.S.Nakagawa" <yaemon@kikansha.jp>

06:17 ade 

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

09:45 kris 

BROKEN on !i386: Does not compile

19:26 knu 

Update to 0.76.  Pthread is not required any longer.

20:00 knu 

Fix a typo.

08:16 knu 

Introduce Makefile.common for upcoming children ports.

08:05 knu 

Update to 0.75.

06:51 knu 

Add mecab, yet another part-of-speech and morphological analyzer.