09:09 Gerald Pfeifer (gerald) 

*: Bump PORTREVISIONs for math/mpc update to 1.3.1

    8d3e020

21:10 Stefan Eßer (se) 

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.

There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.

The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.

Approved by:		portmgr (tcberner)

    b7f0544

19:23 Kevin Bowling (kbowling) 

devel/libffi: Bump deps PORTREVISION for shlib change

PR:		263764
Reported by:	VVD <vvd@unislabs.com>

    db78da8

09:10 Kai Knoblich (kai) 

lang/micropython: Update to 1.17

* Switch to GCC because building with Clang leads to a broken
  "mpy-cross" binary, which segfaults if issued with several parameters
  during build.

* REINPLACE_CMD should not be used to replace static content, hence
  convert those occurrences into patches.

* Also update pkg-descr and sort variables a bit according to the PHB.

Reviewed by:	decke (earlier revision)
Approved by:	kai (python, maintainer)
Differential Revision:	https://reviews.freebsd.org/D31855

    31d9698

08:13 Kai Knoblich (kai) 

lang/micropython: Assume maintainership for python@

Reported by:	koobs
MFH:		2021Q3

    334bcb1

08:09 Mathieu Arnold (mat) 

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

    cf118cc

14:31 Mathieu Arnold (mat) 

Remove # $FreeBSD$ from Makefiles.

    305f148

18:11 zeising 

Chanse update of devel/libffi

Chase the devel/libffi update
Bump portrevision of all dependent ports to chace shard library version bump
in libffi.
Update LIB_DEPENDS lines where needed to not require a specific version of
libffi.so.

PR:		247028 (for tracking)

 

14:04 sunpoet 

Update devel/readline to 8.0

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://tiswww.case.edu/php/chet/readline/CHANGES
PR:		236156
Exp-run by:	antoine

 

15:50 mat 

Convert Python ports to FLAVORS.

  Ports using USE_PYTHON=distutils are now flavored.  They will
  automatically get flavors (py27, py34, py35, py36) depending on what
  versions they support.

  There is also a USE_PYTHON=flavors for ports that do not use distutils
  but need FLAVORS to be set.  A USE_PYTHON=noflavors can be set if
  using distutils but flavors are not wanted.

  A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
  added to cope with Python ports that did not have the Python
  PKGNAMEPREFIX but are flavored.

  USES=python now also exports a PY_FLAVOR variable that contains the
  current python flavor.  It can be used in dependency lines when the
  port itself is not python flavored.  For example, deskutils/calibre.

  By default, all the flavors are generated.  To only generate flavors
  for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
  BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.

  In all the ports with Python dependencies, the *_DEPENDS entries MUST
  end with the flavor so that the framework knows which to build/use.
  This is done by appending '@${PY_FLAVOR}' after the origin (or
  @${FLAVOR} if in a Python module with Python flavors, as the content
  will be the same).  For example:

    RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}

PR:		223071
Reviewed by:	portmgr, python
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D12464

 

06:13 linimon 

For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.

This is part two of a multipart commit to bring armv7 ports to parity
with armv6.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com -exp run

 

13:46 sunpoet 

Update devel/readline to 7.0 patch 3

- Bump PORTREVISION for shlib change

Changes:	https://cnswww.cns.cwru.edu/php/chet/readline/CHANGES
		https://lists.gnu.org/archive/html/bug-bash/2016-09/msg00107.html
		https://lists.gnu.org/archive/html/bug-readline/2017-01/msg00002.html
Differential Revision:	https://reviews.freebsd.org/D11172
PR:		219947
Exp-run by:	antoine

 

02:16 linimon 

Mark as broken on armv6.  Although there is an assembler routine for arm,
the label "0:" is rejected.

Perhaps an update to 1.8.7 could help.

Approved by:	portmgr (tier-2 blanket)

 

22:27 rene 

Reset mva@'s ports, he handed in his ports bit.

 

10:00 amdmi3 

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL
- Switch to new test framework

Approved by:	portmgr blanket

 

18:12 mat 

Never set WRKSRC when using USE_GITHUB.

If you want to set WRKSRC, set GH_PROJECT instead.
- The GitHub URLs are case insensitive, but the distribution files you
  get out of them are not.
- If the repository was renamed, the old URL will still work, but the
  distribution name will be ith the new name.

Sponsored by:	Absolight

 

09:38 gerald 

Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).

In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.

 

14:08 mat 

Remove ${PORTSDIR}/ from dependencies, categories h, i, j, k, and l.

With hat:	portmgr
Sponsored by:	Absolight

 

09:35 mva 

- Update to version 1.5.1

A full list of changes since version 1.4.1 can be found at
https://github.com/micropython/micropython/releases.

Changelog: https://github.com/micropython/micropython/releases/tag/v1.5.1

 

09:05 mat 

Don't use GH_TAGNAME when DISTVERSION* variables can be used.

With hat:	portmgr
Sponsored by:	Absolight

 

13:00 mva 

- Update to version 1.4

Major changes since 1.3.1:

- new builtins, ujson, uheapq, ubinascii modules
- new memoryview and compile builtins
- improvements for eval and exec
- array slice assignment support
- basix regex support
- x86 support for the native emitter
- many other fixes and improvements

Changelogs: https://github.com/micropython/micropython/release

 

08:10 mva 

- Update to version 1.3.1

Changelog: https://github.com/micropython/micropython/releases/tag/v1.3.1

 

08:55 mva 

- Convert my ports to USES=python

 

08:57 mva 

- Update to version 1.2
- Respect CFLAGS and CPPFLAGS

 

13:24 adamw 

Add USES=readline to fix build on -current.

 

11:16 mva 

Micro Python is a lean and fast implementation of the Python 3 programming
language that is optimised to run on a microcontroller.

WWW: http://www.micropython.org