A ports freeze means that commits will be few and far between and only by approval.

Number of commits found: 74

Change from USE_BISON=yes to USE_BISON=build (functionally equivalent).

PR:             ports/127512
Submitted by:   Paul Hoffman <phoffman@proper.com>
Approved by:    maintainer

- Update maintainer mail address

PR:             125786
Submitted by:   Phillip N. <pneumann@gmail.com>

- Remove duplicates from MAKE_ENV after inclusion of CC and CXX in default
MAKE_ENV

- Fix fetch

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Fix build on -CURRENT

Submitted by:   Ted Faber

Update to 1.2.5.1
- reenable amd64 support while we're at it.

Submitted by:   Phillip Neumann
Project by:     BSD# (http://www.mono-project.com/Mono:FreeBSD)

Migration from bison 1.x to 2.x

PR:             117086
Tested by:      -exp runs

Fix socket threading in Mono's IO layer.
- patch-mono_io-layer_sockets.c
- patch-mono_io-layer_socket-private.h

Submitted by:   Robert Wojciechowski

Update to 1.2.3.1
- 1,933 missing methods were implemented
- 164 methods with pending implementations were fixed
- Several critical fixes to the runtime startup affecting multi-threaded
  applications
- Windows.Forms improvements and bugfixes

Submitted by:   Phillip Neumann
Project by:     BSD# <http://www.mono-project.com/Mono:FreeBSD>

- Work around crashes during build due to LC_* settings in environment by
  setting LC_ALL=C [1]
- Crash instead of looping infinitely when Mono can't obtain a semaphore.
  Patch from Mono's SVN [2]

Reported by:    A few people [1], pointyhat [2]
Submitted by:   Phillip Neumann [1], Lou Kamenov [2]

Force build to use the bundled mcs instead of the system's mcs if Mono is
already installed.  This clears up issues where some people could not build
Mono if it was already installed.

Remove amd64 as an available arch to build on.
- builds are exhibiting semaphore problems on pointyhat runs causing failure
  to build.

Fix objformat fallout on -CURRENT.

Thanks to Andrzej Tobola and Sebastian Nowicki for lending me access to a
machine.

s/INSTALLS_SHLIB/USE_LDCONFIG/

- Update to 1.2.2.1
- amd64 now enabled (and reportedly works quite well)
- Remove annoying semdel stuff because mono releases its semaphoresa now

Thanks to everyone on the BSD# mailing list for providing feedback as to the
stability of this release on multiple archs and version lines.

Helped by:      Many people on the BSD# mailing list
Projecy by:     BSD# (http://www.mono-project.com/Mono:FreeBSD)

Use PTHREAD_LIBS with the included libgc.

Submitted by:   nork

Update to 1.1.13.8.1
- fix CVE-2006-5072:
        Sebastian Krahmer of the SuSE security team discovered that the
        System.CodeDom.Compiler classes used temporary files in an insecure
        way. This could allow a symbolic link attack to create or overwrite
        arbitrary files with the privileges of the user invoking the
        program. Under some circumstances, a local attacker could also
        exploit this to inject arbitrary code into running Mono processes.
        vuxml id: 5a39a22e-5478-11db-8f1a-000a48049292

- Add USE_NANT to bsd.mono.mk for those ports I have hanging around
  which require NANT to build.

Release notes:
- 1.1.13.8.1:   http://go-mono.com/archive/1.1.13.8.1/
- 1.1.13.8:     http://go-mono.com/archive/1.1.13.8/

Project by: BSD# http://www.mono-project.com/Mono:FreeBSD

- Update to 1.1.13.6
        Changelog: http://go-mono.com/archive/1.1.13.5/
- Fix my MASTER_SITE_SUBDIR
- Fix pthread usage when running unit tests.
- portlint

I had said on the BSD# mailing list that I would probably enable amd64
in the port but I'm holding off on that until some EM64T issues are
tracked down.

[1] http://forge.novell.com/pipermail/bsd-sharp-list/2006-April/000813.html
[2] http://forge.novell.com/pipermail/bsd-sharp-list/2006-April/000815.html

Conversion to a single libtool environment.

Approved by:    portmgr (kris)

Update to 1.1.13.2

Release notes:  http://go-mono.com/archive/1.1.13/

Port changes:
- Execute mono-semdel during pre-clean in addition to post-install
- Execute mono-semdel over ${WRKSRC}/runtime as a precaution
- Add G_DEBUG="" to mono-semdel target in bsd.mono.mk to prevent
  dropping core files with upcomming glib 2.9 [1]
- add XSP_DOCROOT for when we eventually have an xsp port in the ports
  tree (If interested in xsp let me know)
- Remove lingering USE_REINPLACE while I'm here

Submitted by:   Andres Kohn [1]
Project by:     BSD# <http://www.mono-project.com/Mono:FreeBSD>

Add mirror site on MASTER_SITE_LOCAL.

Prompted by:    kris

Update to 1.1.12.1

Project by: BSD# <www.mono-project.com/Mono:FreeBSD>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

(Long awaited) update to 1.1.9.2

Mono Changes:
    - Series release:   http://www.go-mono.com/archive/1.1.9/
    - Patch release:    http://www.go-mono.com/archive/1.1.9.1_0/
                        (No 1.1.9.2 release announcement.)

Port Changes:
    - Add pkg-message to explain reasons for common build failures and
      note the need to possibly increase the number of semaphores from
      the default FreeBSD amounts.
    - Add preliminary amd64 support [1,2] which has been disabled for
      the time being due to lingering stability issues.
    - Force the Mono build to only write within ${WRKDIR} and no longer
      write to ~/.wapi which leads to...

(Only the first 15 lines of the commit message are shown above )

Bump PORTREVISION to chase glib update that came with Gnome 2.12
- Initially I planned to make a large Mono commit right after Gnome 2.12
  was merged but the new Gnome has in part caused me to delay merging
  updates to Mono and friends.

Approved by:    mezz (co-mentor)

Fix the plist by taking care of directories in X11BASE too.

        lib/mono/1.0
        lib/mono/2.0

Approved by:    portmgr (marcus)
Reported by:    krion via pointyhat

Really fix build for FreeBSD 7.x.

        Change from:    ${OSVERSION} > 700000
        To:             ${OSVERSION} >= 700000

Reported by:    Anthony Ginepro <rapiere@renaissance.homeip.net>

Fix the build on FreeBSD 7.x by teach it. I need to contact with mainstream
for use wildcard 'freebsd*' in general configure and 'freebsd[0-9] for any
version that need to be different.

Reported by:    krismail

Fix the .so.0 -> .so, got bite by beagle when it can't find libsqlite.so.0.
Bump the PORTREVISION.

Update to 1.1.8.2, most semaphore bugs in 1.1.8(.1) have been fixed.

Release Notes:
        http://www.go-mono.com/archive/1.1.8/
        http://www.go-mono.com/archive/1.1.8.1/

BTW: Welcome apeiron (Christopher Nehren <apeiron@comcast.net>) to BSD# team,
     he has the commit access over there.

BSD# - Project by:      http://www.mono-project.com/Mono:FreeBSD

[...Took from jylefort's comment in email with a bit tweak...]
Mono will using Gamin or FAM by default if it exists in the runtime. If either
doesn't exist then it will use KeventWatcher.cs. Add auto-check on Gamin and
FAM for dependency. Bump the PORTREVISION to have the fix of kqueue.

Rationale:

        - KeventWatcher.cs is naive, it does not report changes made to
          files within a monitored directory [1]
        - KeventWatcher.cs is implemented in C#, it is therefore slower than
          Gamin or FAM, which are implemented in C and C++, respectively

[1] this is a bug which should be reported to the vendor

Testing, using the attached WatchTest.cs:

(Only the first 15 lines of the commit message are shown above )

Update to 1.1.7, Bill Middleton has been working against the Mono SVN to fix
FreeBSD problems with Mono. As of Mono 1.1.7, Mono has made a tremendous leap
in stability on FreeBSD. Many C# apps now works much better with Mono 1.1.7.

BSD# - Project by:      http://www.mono-project.com/Mono:FreeBSD

Bump PORTREVISION to chase the glib20 shared lib version change.

Update to 1.0.6, see details: http://www.go-mono.com/archive/1.0.6/

Submitted by:   Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Project by:     BSD# - http://forge.novell.com/modules/xfmod/project/?bsd-sharp

BSD# Project is taking the maintainership.

BSD# Project: http://forge.novell.com/modules/xfmod/project/?bsd-sharp

Submitted by:   tmclaugh

With portmgr hat on, reset maintainership of these ports.  Maintainer's
old email address bounces, and he has not been responsive to email on the
only other one we have for him.

These ports are now available for adoption.

Come back coop, we miss ya ...

Fix the pkg-plist issue in gtk-sharp when it installs in mono's directory. Let
mono to take of ${X11BASE} directories same as in ${LOCALBASE}.

Project by:     BSD# - http://forge.novell.com/modules/xfmod/project/?bsd-sharp
Approved by:    maintainer timeout (still no contact for months)

Update to 1.0.5.

Submitted by:   Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Project by:     BSD# - http://forge.novell.com/modules/xfmod/project/?bsd-sharp
Approved by:    maintainer timeout (still no contact for months)

Update to 1.0.4. Mono has been set to IGNORE on 5.x if OSVERSION is below
503000.  Mono 1.0.1 and greater have been broken on earlier OSVERSION
versions. Warning, not all C# apps will not working, because FreeBSD still
need to work more on pthread issues. Few C# apps such as Blam, Muine, Tomboy
and etc work perfect.

PR:             ports/74397 ports/74398
Submitted by:   Tom McLaughlin <tmclaugh@sdf.lonestar.org>
Project by:     BSD# - http://forge.novell.com/modules/xfmod/project/?bsd-sharp
Approved by:    maintainer timeout (no contract for months)

- Don't hardcode shlib versions
- Libintl is not part of libc on FreeBSD

PR:             ports/70318
Submitted by:   Christopher Nehren <apeiron@comcast.net>
Approved by:    maintainer timeout (14 days)

- Chase redirect

PR:             ports/69568
Submitted by:   zeekay <zk@wspim.edu.pl>

- Update to 1.0

PR:             ports/68804
Submitted by:   John Merryweather Cooper <johnmary@adelphia.net> (maintainer)

- Update to 0.97

PR:             ports/68409
Submitted by:   John Merryweather Cooper <coop9211@uidaho.edu> (maintainer)

We have a new Mono vict^W^W^Wolunteer!  John Merryweather Cooper has offered
to take these ports.

Make uses elif not elsif, Marcus.

Reported by:    Freshports

Update to 0.95 (aka Mono 1.0 Beta 2).  With this commit, plus David Xu's
KSE signal fixes from 6/12/2004, Mono now works on both 4.X and -CURRENT
(well, all but two benchmarks build and run successfully on both 4.X and
-CURRENT).

Note: you may need to rm -r ~/.wapi before building if you've tried older
versions of Mono.

Resign maintainership to ports@.  gnome@ hasn't been that active in maintaining
this, and there are some non-trivial GC problems to overcome.  Hopefully
someone will step up with a passion for .NET.

Chase the glib20 update, and bump all affected ports' PORTREVISIONs.

Whoa there, boy, that's a mighty big commit y'all have there...

Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".

For ports-in-waiting:

        USE_LIBTOOL=YES         ->      USE_LIBTOOL_VER=13
        USE_AUTOCONF=YES        ->      USE_AUTOCONF_VER=213
        USE_AUTOMAKE=YES        ->      USE_AUTOMAKE_VER=14

Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.

Update to 0.30.1.

PR:             63172
Submitted by:   ZParta <zparta@skebo.ac>

Change BROKEN to IGNORE since the package actually builds (but does not work)

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Update to 0.29.

PR:             60228
Submitted by:   John Merryweather Cooper <johnmary@adelphia.net>

Mark BROKEN on -CURRENT.  Having garbage collection enabled causes mono
to core dump when it tries to allocate what seems like 512 MB of memory
when it tries to do garbage collection.  Anyone wanting to look at fixing
boehm-gc on FreeBSD is more than welcome to submit patches.  You will not
be turned away.

I believe this works now.  I am able to compile and run some C# apps included
in the mono/tests/ subdirectory, and it no longer hangs or dies with weird
errors.  (And, yes, I do have garbage collecting enabled).

I'll let the C# user community be my judge.  There still may be some issues
since boehm-gc isn't fully functional in its multi-threaded state on FreeBSD.

Update to 0.28, and mark that it is only for i386.  Note, it's still not
clear whether this works correctly on FreeBSD.

Utilize USE_GNOME= pkgconfig.

Add some missing libraries to the plist.

Reported by:    bento

Upgrade to latest Mono (0.24 release), which includes most notably
a newer and much better JIT.

Approved by:    marcus (mentor)

Convert to new GNOME infrastructure.

Remove USE_GNOMENG.

Update to 0.21.

Approved by:    marcus (mentor)

Update to 0.20, de-pkg-comment.

Approved by:    marcus (mentor)

Chase glib20's shared lib version.

Update to Mono 0.19.

Reviewed by:    marcus (mentor)

Update to 0.18.

Define INSTALLS_SHLIB.

Update to 0.17.

Requested by:   many
Not tested by:  me

Fix build on -CURRENT and with bison 1.75.

Reported by:    bento

Add fix for bind critical bug.
Add fix OSREL in Makefile

Update to 0.13

Add USE_BISON.

Submitted by:   bento

Initial import.
.NET clone by Ximian

Number of commits found: 74

9 vulnerabilities affecting 22 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities