08:46 az 

- Remove lang/perl5.8 and lang/perl5.10

Reviewed by:	bapt@
Approved by:	skv@ (implicit via email)

 

23:49 linimon 

Undo ports/165457 to not violate POLA.  As far as I knew, the PR
was to test what happened when we did eventually delete these two
ports, not to delete them immediately.

A subsequent commit will add appropriate deprecation messages.

Hat:            portmgr
PR:             ports/165457
Feature safe:   yes (actually no, however, this is to preserve POLA)

18:37 pgollucci 

- Remove lang/perl5.8 (12/16/2008 EOL) and lang/perl5.10 (08/23/2009 EOL)
- lang/5.12 (default) is in Maint mode and lang/5.14 is GA right now.
- The final UNcommitted portition of this PR will move the default perl
  to lang/perl5.14 but
    mail/cyrus-impad2
    mail/cyrus-impad22
    print/perlftlib
    audio/papcl
    www/WebMagick
    misc/gcstar
    math/ploymak
  must be fixed or marked BROKEN 1st.

PR:             ports/165457
Submitted by:   pgollucci (myself)
Approved by:    portmgr (linimon)
Exp Run by:     linimon
Tested by:      make index

05:39 gordon 

Add patch to install a configuration file for the new man utility
instead of manipulating /etc/manpath.config.

Approved by:    maintainer (timeout), wes@ (mentor, implicit)

21:38 skv 

Update to 5.8.9

Also:

- add option SITECUSTOMIZE which enable -Dusesitecustomize [1]

- add patch against sv_dup() bug causes memory corruption in threaded perl [2]

Changes:        http://search.cpan.org/~nwclark/perl-5.8.9/pod/perl589delta.pod
PR:             111120 [1], 130033 [2]
Submitted by:   "Ian A. Tegebo" <yontege xx dev-mug.rescomp.berkeley.edu> [1],
                kevin brintnall <kbrint xx rufus.net> [2]

16:24 skv 

- Take maintainership [1]
- Use OPTIONS
- Add CONFLICTS
- Use "pre-su-install" (for rootless builds)

Approved by:    tobez (previous maintainer) [1]

20:24 tobez 

Upgrade to 5.8.8.

Also:
Do not strip when built with -DWITH_DEBUGGING. [1]
Do not build non-threaded perl with -pthread. [2]
Add rebuild-xs target which should be used when
perl-after-upgrade does not do its job adequately. [3]
Fix perl-after-upgrade to handle threaded perl. [4]

Submitted by:   John Narron <jnarron@cdsinet.net> [2],
                Sergey Prikhodko <sergey@network-asp.biz> [4],
                parv@pair.com [1],
                pavel@ctk.ru [2],
                skv [3],
                vasilis <vasilis@karkampounas.gr> [2]
PR:     83223 [4], 83767 [2], 84255 [2], 89443 [1], 90832 [2]

02:18 edwin 

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

09:17 tobez 

Upgrade to 5.8.7.  In addition:

    - add perl-after-upgrade utility to move around
      dependent packages
    - fix $0 expansion in use.perl [1]
    - enable threaded perl on amd64 [2]
    - always compile perl with -pthread [3]
    - fix errno issue in SDBM_File [4]
    - add support for // and err (defined-or) [5]
    - add WITH_DEBUGGING option [6]
    - fix suidperl symlink [7]
    - fix several small bugs in use.perl
    - print possible WITH_XXX flags (no OPTIONS support yet)

[1] Submitted by:       erwin, Niël Dogger <niel@introweb.nl>
[2] Nudged by:          Mike Schroll <FreeBSD@LogicX.us>
[3] Nudged by:          skv
[4] perl bug #35938
[5] Obtained from:      H.Merijn Brand <h.m.brand@xs4all.nl>
[6] PR: 78811, submitted by:    skv
[7] PR: 80069, submitted by:    Sergey N. Voronkov <serg@tmn.ru>
    A different solution was actually implemented.

13:36 tobez 

Update to 5.8.6.  Also:

- redirect output from h2ph to /dev/null [1];
- fix File::Path insecure file/directory permissions [2];
  this resolves CAN-2004-0452
  (http://vuxml.freebsd.org/c418d472-6bd1-11d9-93ca-000a95bc6fae.html);
- for OSVERSION < 500036, create symlinks in /usr/bin not only for
  perl and suidperl, but also for a2p, c2ph, find2perl, h2ph, h2xs,
  perlbug, perlcc, perldoc, pl2pm, pod2html, pod2latex, pod2man,
  pod2text, s2p, and splain;  perl and suidperl are still enough for
  more recent FreeBSD versions [3];
- clean up created symlinks upon deinstallation [4];
- try to cleanup symlinks created by older versions of lang/perl5 and
  lang/perl5.8, during both installation and deinstallation [5];
- added support for DISABLE_BSDPAN environment variable [6];
- be explicit about use.perl usage after installation of 4.X systems
  [7];
- respect __MAKE_CONF partially (the build-time value is used) [8];
- fix threaded build - respect PTHREAD_CFLAGS and PTHREAD_LIBS [9].
- use.perl is now the same as pkg-install is now the same as
  pkg-deinstall;  apart from the changes already mentioned above, this
  is a shell script now;
- use.perl's logic is also simplified in several ways [10];
- fix a BSDPAN bug [11].

Outstanding issues: Module::Build support for BSDPAN, SU_CMD support (PR
70831), PR 64963 (partially), and anything else that I forgot.

[1] Nudged by: krion
[2] Reported by: nectar
    Patch from: Chris Turner @ RedHat
[3] PR: 55760, 57151, 58406
[4] Requested by: kris
    PR: 54262
[5] PR: 51281, 51539
[6] PR: 57134
[7] PR: 60736
[8] PR: 74431
[9] PR: 73233
[10] Perl version submitted by des, implemented in sh
[11] Reported by: Alexander Nagilum <freebsd %at% nagilum de>

08:31 tobez 

Update to 5.8.5.

23:13 tobez 

1. Update to 5.8.4.
2. Make this port respect Makefile.local.
3. Transfer manpages to Makefile.man.
4. Move manpages for modules, included into distribution, into
   lib/perl5/PERL_VER/perl/man/man3, to eliminate file conflicts
   with p5 ports for modules included with perl.
5. Use PREFIX/SITE_PERL_REL instead of SITE_PERL in the Makefile.
6. Switch to bzipped sources.
7. Other small adjustments.

PR:     65925, 66096, 67205

Submitted by:   foxfair (1), Charles Swiger <chuck@pkix.net> (1), krion (3)
Reported by:    Roy Badami <roy@gnomon.org.uk> (2)

00:07 tobez 

In some cases of weird symlinking (possibly triggered by portupgrade),
perl binary might fail to be installed during make install.  Try to fix
that.

Reported by:    "Shobaki sam." <shsam@free.fr>
PR:             59186

18:08 tobez 

1. Update to 5.8.2.
2. Finally switch to libperl.so.
3. Respect CFLAGS.

PR:             58735 (item 3)
Submitted by:   Lars Eggert <larse@isi.edu> (item 3)

20:46 tobez 

Fix the workings of ENABLE_SUIDPERL knob.

Reported by:    Neil Darlow <neil@darlow.co.uk>, Nicola Tiling <nti@w4w.net>

19:48 tobez 

Update to 5.8.1.

Also:

Make suidperl optional (ENABLE_SUIDPERL knob).  Switch to perlmalloc by
default, unless threaded perl is built, to improve performance.
Modernize pkg-plist (switch to SITE_PERL where possible).  Update WWW.

Many thanks to foxfair who prepared most of this update.

12:05 ijliao 

utilize SITE_PERL

PR:             58166
Submitted by:   Cheng-Lung Sung <clsung@dragon2.net>

09:14 tobez 

Merge from lang/perl5:

    Add two knobs:

    WITH_PERL_MALLOC - to compile with perl's own malloc, as opposed to
    the freebsd system malloc. Some might find this useful, since perl's
    malloc is marginally faster in typical cases, and orders of
    magnitude faster in degenerate cases. Use with care.

    WITH_GDBM - to compile with gdbm support.

17:09 tobez 

Update to 5.8.0 (after repocopy).