non port: lang/python26/Makefile |
Number of commits found: 52 |
Sunday, 8 Dec 2013
|
09:03 koobs
Bump PORTREVISION for all Python ports to pickup the recent ARM patch
PR: ports/149167
|
08:57 koobs
Reduce diffs, sort sections & Add LICENSE for Python 2.6, 2.7 & 3.3
- Sort USE_*, *_WRKSRC and CONFIGURE/MAKE sections
- Whitespace alignment for readability
- Add LICENSE (PSFL)
Reviewed by: milki
|
08:06 koobs
lang/python26: Add FreeBSD 11 support, enable POSIX Semaphores on FreeBSD 7+
Finish off adding FreeBSD 11 support to our Python ports by backporting
wg@'s changesets [1] and [2], and mine from python32 [3] to
lang/python26. These changes also bring more consistency and reduced diffs
between ports
[1] https://svnweb.freebsd.org/ports?view=revision&revision=333665
[2] https://svnweb.freebsd.org/ports?view=revision&revision=333487
[3] https://svnweb.freebsd.org/ports?view=revision&revision=335376
Reviewed by: milki
|
07:13 koobs
lang/python26: Use ports libffi to address ctypes build failure on i386
Unconditionally use libffi from ports because the Python 2.6 branch was
closed for maintenance when the import of libffi 3.0.13 took place.
fixes _ctypes module build failure on i386. [1]
This change was also committed to lang/python31 [2] and makes the recent
FreeBSD/ARM patch [3] a NOOP, which will once again be addressed when
ports/184517 lands [4]. This gives users the greatest amount of choice
and flexibility just prior to expiry of the python27 and python31 ports
[1] Fixes Issue #17192: Update the ctypes module's libffi to v3.0.13.
This specifically addresses a stack misalignment issue on x86 and
issues on some more recent platforms. [#17192]
http://bugs.python.org/issue17192
http://hg.python.org/cpython/rev/a94b3b4599f1
http://hg.python.org/cpython/rev/688bc0b44d96
[2] https://svnweb.freebsd.org/ports?view=revision&revision=335370
[3] https://svnweb.freebsd.org/ports?view=revision&revision=335867
PR: ports/184517 [4]
|
Sunday, 24 Nov 2013
|
14:03 koobs
lang/python26: Fix CFLAGS in python-config where cc = clang
- Temporarily override OPT:Olimit using CONFIGURE_ENV (ports/182952) [1]
- Replace patch: extra-patch-configure-pth with CONFIGURE_ENV instead
- QA: Clean up and group related USE_*, WRKSRC and CONFIGURE entries
- QA: Whitespace alignment
- QA: Clarify DEPRECATED message
[1] Python removed OPT:Olimit in 3.2+, requested backport or
alternative upstream patch: http://bugs.python.org/issue877121
PR: ports/182952
Submitted by: pawel
Reviewed by: antoine
|
Saturday, 2 Nov 2013
|
12:37 mva
- Update to version 2.6.9
With the 2.6.9 release, and five years after its first release, the
Python 2.6 series is now officially retired. All official maintenance
for Python 2.6, including security patches, has ended. [1]
Please migrate to lang/python27 or later as soon as possible.
lang/python26 will expire and be removed in January 2014.
[1] http://www.python.org/download/releases/2.6.9/
With hat on: python@
Reviewed by: koobs@
|
Friday, 20 Sep 2013
|
19:53 bapt
Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)
|
Sunday, 8 Sep 2013
|
14:05 koobs
Resolve gettext (libintl) detection and linking in all Python ports
Fix gettext (NLS) detection, includes and linking:
- all: Use LDFLAGS and CPPFLAGS over CFLAGS for NLS option (with comment)
- python26,27: Pass LIBS="-lintl" to CONFIGURE_ENV
Workaround Pythons odd build mechanics causing duplicate args:
- all: Remove CFLAGS from OPT= in CONFIGURE_ENV
- python32,33: Remove CONFIGURE_* variables from Makefile.pre.in
Other:
- python32: Patch setup.py to pass OPT correctly to shared modules
PR: ports/181721
Reported by: pawel
Reviewed by: bapt mva sbz
|
Saturday, 17 Aug 2013
|
19:10 mva
- Move the symlink magic for the default python version into lang/python
and lang/python2 and lang/python3. This change brings us closer to the goal
of making Python ports usable with different Python versions at the same
time.
- Add a new lang/python2 port to handle the symlinks for bin/python2,
bin/idle2, bin/pydoc2 and so on.
- Add a new lang/python3 port to handle the symlinks for bin/python3,
bin/idle3, bin/pydoc3 and so on.
- Bump the PORTREVISION on all lang/python* ports.
|
Wednesday, 14 Aug 2013
|
22:35 ak
- Remove MAKE_JOBS_SAFE variable
Approved by: portmgr (bdrewery)
|
Friday, 17 May 2013
|
04:17 rm
- update to latest upstream versions:
. lang/python27: 2.7.3 -> 2.7.5
. lang/python32: 3.2.3 -> 3.2.4
. lang/python33: 3.3.0 -> 3.3.1
- update Mk/bsd.python.mk with new versions
- mark lang/python26 and lang/python31 as deprecated (set them to
upstream EoL dates)
- update docs (lang/python-doc-html)
- align databases/py-bsddb patch for python27 - most of it was applied
upstream. Raise BDB version to 4.3 atleast, according to
upstream requirements.
Many thanks to Martin (miwi) for his time on this update.
PR: 178506
Submitted by: rm (myself)
Exp-run by: portmgr (miwi)
- revert erroneous threads patch in lang/python26 and lang/python27,
that was added after ports/131080. It was rejected upstream, because it's
not actually a bug, but misuse.
Gabor Pali (pgj) in collaboration with Kubilay Kocak (koobs) did an
independent investigation regard the issue. See here for details:
http://lists.freebsd.org/pipermail/freebsd-python/2013-April/005376.html
PR: 153167
Submitted by: Duncan Findlay <duncan@duncf.ca>
Reported by: pgj/koobs (at python@ ML)
Exp-run by: portmgr (miwi)
|
Saturday, 11 May 2013
|
11:37 rm
Commit all the non-functional changes to python ports to reduce the diff size
for an exp-run of updated python versions.
- trim Makefile headers
- remove leading indefinite article from COMMENT
- use PYTHON shortcut in MASTER_SITES
- whitespace fixes
- remove checks for unsupported versions of FreeBSD
- use static value ``33'' instead of PYTHON_SUFFIX in lang/python33/pkg-plist,
because this value is not supposed to be changed across the branch and for
consistency with other python3 ports
- remove conflicts in lang/python-mode.el with not more existing python-2.4
|
Monday, 6 May 2013
|
06:32 jgh
- adoption of USES for gettext
Approved by: portmgr (bapt@)
|
Sunday, 23 Dec 2012
|
17:52 lwhsu
- Remove "first-installed-win" logic for automatically setting
${PYTHON_DEFAULT_VERSION}, this generates conflicting packages.
- Create symbolic links as PEP 394 [1] suggests. ${PYTHON_DEFAULT_VERSION}
will create python and python${MAJOR_VERSION} links. In current default,
lang/python27 will create: python -> python2 -> python2.7
- Introduce ${PYTHON3_DEFAULT_VERSION}, which will handle bin/python3 link.
At this point, lang/python33 will create python3 -> python3.3
- Minor cleanups
* Trim Makefile headers
* Remove ${OSVERSION} detection for xz, whihc is done by USE_XZ
[1] http://www.python.org/dev/peps/pep-0394/
|
Wednesday, 3 Oct 2012
|
04:06 rm
- do not hardcode distfile extension for lang/python ports in bsd.python.mk
(PYTHON_DISTFILE variable)
- switch lang/python ports (and it's slaves) to tar.xz
I compared all the four pairs .tgz/.tar.xz and they have no content differences.
Discussed on: python@
|
Saturday, 8 Sep 2012
|
11:49 ohauer
- fix PORT_OPTIONS s/)/}/
|
Sunday, 22 Jul 2012
|
09:45 mva
- Fix Python OPT flags for WITH_PTH knob
PR: ports/168767
Submitted by: Marcus von Appen <mva@freebsd.org>
|
Wednesday, 20 Jun 2012
|
22:35 mva
- Fix builds, if the NLS option switch is set. In some cases
expat-related modules are not built correctly.
PR: ports/169276
Submitted by: Greg Byshenk <freebsd@byshenk.net>
|
Tuesday, 19 Jun 2012
|
17:48 mva
- Fix gettext detection for the locale module
- Explicitly enable/disable gettext support via a new NLS OPTION switch.
PR: ports/168684 ports/136917
On behalf of: python@
|
Thursday, 31 May 2012
|
15:17 miwi
- Revert back UCS changes
|
10:13 miwi
- Correct PYMALLOC logic (that fix the build of devel/gobject-introspection)
- Remove old OPTION layout from py32
- Bump PORTREVISON
|
Tuesday, 29 May 2012
|
16:42 miwi
- Convert to new options framework
Reviewed by: bapt
|
Monday, 28 May 2012
|
05:16 miwi
- Unbreak build on powerpc
PR: 168361
Submitted by: linimon
|
Wednesday, 11 Apr 2012
|
12:52 miwi
- Update:
* python26 -> 2.6.8
* python27 -> 2.7.3
* python31 -> 3.1.5
* python32 -> 3.2.1
Security:
http://www.vuxml.org/freebsd/b4f8be9e-56b2-11e1-9fb7-003067b2972c.html
CVE-2012-0845 CVE-2012-0876 CVE-2012-1150 CVE-2012-0845
CVE-2011-3389
|
Saturday, 18 Feb 2012
|
17:53 miwi
- Mark Python as Secure
- Fix DoS via malformed XML-RPC / HTTP POST
Submitted by: rm@
Reported by: many
Obtained from: python hg
Security:
http://www.vuxml.org/freebsd/b4f8be9e-56b2-11e1-9fb7-003067b2972c.html
|
Wednesday, 9 Nov 2011
|
15:26 miwi
- Remove WITH_FBSD10_FIX, is no longer needed
|
Saturday, 5 Nov 2011
|
13:18 sunpoet
- Remove outdated patch to prune __wchar_t from CFLAGS (python-config --cflags)
- Bump PORTREVISION for package change
PR: ports/161564
Submitted by: Nali Toja <nalitoja@gmail.com>
|
Friday, 28 Oct 2011
|
10:42 beat
- Fix build on FreeBSD 10
Approved by: miwi (implicit)
|
Sunday, 25 Sep 2011
|
15:05 lwhsu
- Remove the HUGE_STACK_SIZE option, now Python will use default
thread stack size of the system.
|
Friday, 23 Sep 2011
|
22:26 amdmi3
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
|
Sunday, 18 Sep 2011
|
08:33 crees
Handle built world without NIS more gracefully; detect missing ypcat and
disable NIS module.
PR: ports/115940
Submitted by: Alex Deiter <tiamat@komi.mts.ru>
Reviewed by: bf
|
Friday, 19 Aug 2011
|
13:09 lwhsu
- Fix pkg-plist when building with WITHOUT_THREADS
PR: ports/159842
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru>
|
Wednesday, 8 Jun 2011
|
08:17 wen
- Update to 2.6.7
|
Monday, 7 Mar 2011
|
06:57 wen
- Apply two patch from svn.python.org to fix CVE-2010-3493 and SA43463
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-3493
http://secunia.com/advisories/43463
|
Thursday, 24 Feb 2011
|
23:50 linimon
Changes to make python ports work on powerpc (32-bit mode; 64-bit not
yet tested).
Tested on: powerpc, i386
Hat: portmgr
PR: ports/153657 (partial)
Submitted by: andreast
|
23:50 linimon
Changes to make python ports work on powerpc (32-bit mode; 64-bit not
yet tested).
Tested on: powerpc, i386
Hat: portmgr
PR: ports/153657 (partial)
Submitted by: andreast
|
Sunday, 12 Sep 2010
|
09:07 wen
- Update to 2.6.6
|
Monday, 19 Jul 2010
|
21:59 jkim
Fix fcntl module to accept 'unsigned long' type commands for ioctl(2).
Although POSIX says the type is 'int', all BSD variants (including Mac OS X)
have been using 'unsigned long' type for very long time and its use predates
the standard long enough. For certain commands (e.g., TIOCSWINSZ, FIONBIO),
the Python value may get sign-extended on 64-bit platforms (by implicit type
promotion) and it causes annoying warnings from kernel such as this:
WARNING pid 24509 (python2.6): ioctl sign-extension ioctl ffffffff8004667e
Approved by: python (maintainer timeout)
|
Wednesday, 12 May 2010
|
12:13 wen
- Update lang/python26 to 2.6.5
- Update lang/python31 to 3.1.2
Reviewed by: miwi@, lwhsu@
|
Thursday, 26 Nov 2009
|
22:21 miwi
- Update to 2.6.4
Changelog:
http://python.org/download/releases/2.6.4/NEWS.txt
|
Tuesday, 15 Sep 2009
|
21:41 miwi
Fix build if POSIX semaphore enabled is
Reported by: many on ports@/python@
Patched by: beat@
Feature safe: yes
|
Friday, 11 Sep 2009
|
14:58 miwi
- Add support for FreeBSD 9.0
PR: based on 138600
|
Thursday, 13 Aug 2009
|
12:12 miwi
- Use dirrmtry in lib-old dir to fix some plist leftlovers
|
Sunday, 2 Aug 2009
|
10:58 lwhsu
- Fix build with WITH_SEM but ${OSVERSION} < 701106 (mark IGNORE correctly)
PR: ports/136992
Submitted by: Andrey Zonov <andrey.zonov AT gmail.com>
|
Tuesday, 14 Jul 2009
|
09:29 lwhsu
- Ask the first Python installed to install the bin/python link,
and be the default Python version
PR: ports/109550
Submitted by: David Yeske <dyeske AT yahoo.com>
Obtained from: tmclaugh
|
Sunday, 12 Jul 2009
|
17:17 lwhsu
- Honor EXAMPLESDIR, DATADIR, NOPORTEXAMPLES, NOPORTDATA
- portlint(1)
|
Monday, 8 Jun 2009
|
22:30 miwi
- Update lang/python26 and make Python 2.6.2 to the default Python version
Tested by: 3 pointyhat runs
Thanks to: pav, gahr, lwhsu, mva, amdmi3
|
Saturday, 14 Mar 2009
|
09:33 bms
Add support for building Python against GNU Portable Threads (Pth),
and also add experimental support for POSIX semaphores in FreeBSD
7-STABLE and up. The option knobs PTH and SEM respectively are
added to enable this behaviour.
Python is able to use POSIX semaphores for thread synchronization
in threading, and prefers them.
The multiprocessing module in Python 2.6 requires POSIX semaphores,
however, the FreeBSD rtld and malloc need further work to allow
a process to call pthread_create() immediately after fork() as it is
not something allowed by a strict interpretation of the POSIX specs;
therefore allow GNU Pth to be used until the situation is resolved.
Approved by: miwi
|
Friday, 27 Feb 2009
|
01:25 sobomax
Make sure the singal is delivered to the main thread, where python
runs its signal handlers, not to a random thread that happens to be
executing at the time when signal arrives. This functionality has been
lost since Python 2.3, possible cause is that the linux implementation
of POSIX threads always delivered signal to the main thread. This
bug results in rather annoying inability to terminate threading script
with ^C for example and there could be other issues as well.
Bump PORTREVISION.
PR: ports/131080
Submitted by: Andriy Pylypenko <bamby@sippysoft.com>
Approved by: MAINTAINER's timeout
|
Sunday, 22 Feb 2009
|
19:56 tmclaugh
Fix typo in UCS4 knob handling.
Noted by: Dominic Fandrey <kamikaze@bsdforen.de> via freebsd-python@
|
Monday, 16 Feb 2009
|
23:32 miwi
- Update to python 2.5.4 and python 2.6.1
Reviewed by: perky | lwhsu
Tested with: exp-run via pav
|
Monday, 13 Oct 2008
|
08:23 perky
Introduce two new versions of Python: 2.6 and 3.0rc1 (finally!)
Python 2.6 will be the next default python version when enough
testings of consumer ports are done. The new "2to3" program is
renamed to 2to3-2.6 and 2to3-3.0 for each version, respectively.
Repo-copied by: marcus
|
Number of commits found: 52 |